Questions and Answers.docx

DOCX document 20 KB Posted

Attached to
Single-Axis Rate Table Federal contract opportunity
Solicitation number
NB6811102302299
Issued by
Department of Commerce National Institute of Standards and Technology

View the file

Other files for this federal contract opportunity

Other files attached to Single-Axis Rate Table, newest first.
File Type Posted
NB681110-23-02299 RFQ Amend 0001.docx DOCX document
NB681110-23-02299 RFQ.pdf PDF
Attachment 1 SOW.docx DOCX document
Attachment 2 Provisions for Completion.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Does the tilt stand allow mounting rate table such that the axis of rotation tumbles through gravity or actually rotating the rate table with respect to gravity?

We want to be able to rotate the rate table so that the table top can be horizontal, vertical, or some angle in between.

What is the range would be the range of rotation for the tilting axis, i.e. would 0 to 90 deg be acceptable?

Yes, rotating between 0 deg and 90 deg is what we want.

Would that rotation be manual or automatic?

Manual, there should be a way to lock the rate table at a fixed angle.

Is there a requirement for the resolution and accuracy of this tilt?

No. It would be useful if there was an analog scale to get the angle close to a desired value.

Is the payload center mounted on the table top or some length away from center of rotation?

The load will typically be centered but not always. We anticipate cases when the payload will be off-center. The payload would be less than one hundredth of the specified maximum payload in this case.

File details come from the government source that posted it. Updated .