18R0060_Commercial_Solicitation.docx
DOCX document 91 KB Posted
- Attached to
- F35 Power Converters Federal contract opportunity
- Solicitation number
- N6893618R0060
About this file
Request For Quote(RFQ)
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amended_Solicitation_2.pdf | ||
| 18R0060_Solicitation_Amendment.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
N6893618R0060
Section A - Solicitation/Contract Form
CLAUSES INCORPORATED BY FULL TEXT
FOR YOUR INFORMATION:
The following addresses and points of contact are provided:
CONTRACT SPECIALIST:
| Name: | Anila Paul |
| Phone: | (760) 939- 2192 |
| DSN: | 437- 2192 |
| FAX: | (760) 939- 3270 |
Email address: anila.paul @navy.mil
U.S. Postal Service Mailing Address:
| COMMANDER |
| CODE 254120D (A.PAUL) 760-939-2192 |
| NAVAIRWARCENWPNDIV |
| 1 Administration Circle, MAIL STOP 1303 |
| CHINA LAKE, CA 93555-6108 |
Direct Delivery Address (UPS, FedEx, etc.):
| COMMANDER |
| CODE 254120D (A.PAUL) |
| NAVAIRWARCENWPNDIV |
| BLDG 02334, MAIL STOP 1303 |
| CHINA LAKE, CA 93555-6108 |
CONTRACTING OFFICER
| Name: | Henry Frohlich |
| Phone: | (760) 939- 7301 |
| DSN: | 437- 7301 |
| FAX: | (760) 939- 3270 |
Email address: henry.frohlich @navy.mil
U.S. Postal Service Mailing Address:
| COMMANDER |
| CODE 254120D (H.FROHLICH) 760-939-7301 |
| NAVAIRWARCENWPNDIV |
| 1 Administration Circle, MAIL STOP 1303 |
| CHINA LAKE, CA 93555-6108 |
Direct Delivery Address (UPS, FedEx, etc.):
| COMMANDER |
| CODE 254120D (H.FROHLICH) |
| NAVAIRWARCENWPNDIV |
| BLDG 02334, MAIL STOP 1303 |
| CHINA LAKE, CA 93555-6108 |
Section B - Supplies or Services and Prices
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Lot |
Power Converters and associated material
FFP
IAW Section C SOW Paragraph 3.0, the Contractor shall provide: Five each 480 VAC to 270 VDC Power Converters, Three 75 foot 270 VDC Cables, Two 100 foot 270 VDC Cables, Five Groundmounted stand-alone Aircraft CableHangars.
NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.
FOB: Destination
NSN: 61501000000814
PURCHASE REQUEST NUMBER: 1300695709
NET AMT
| ITEM NO |
| SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 1 |
| Lot |
Start-up and Commisioning
FFP
IAW Section C SOW Paragraph 3.0, Contractor shall provide: commissioning to include full run through of the system to verify its operation in accordance with the performance requirements. It shall also include on-site hands-on training for to up to six persons on the operation of the system after completion of the commissioning process.
FOB: Destination
NSN: 61501000000814
PURCHASE REQUEST NUMBER: 1300695709
NET AMT
Section C - Descriptions and Specifications
STATEMENT OF WORK
STATEMENT OF WORK
Dated 3/29/2018
1.0 Scope
The Advanced Weapons Laboratory (AWL) at the Naval Air Warfare Center, Weapons Division (NAWCWD) China Lake, CA requires 5 each 480 VAC to 270 VDC Power Converters, including cables, support equipment and commissioning for use with the F-35 Aircraft.
2.0 Applicable Documents and Guidelines
2.1 MIL-STD-704F (including Notices 1 and 2 and CHG 1) Aircraft Electric Power Characteristics (5 DEC 2016)
2.2 National Electrical Manufacturers Association (NEMA) Level 3 or 4 Type Enclosure
2.3 Lockheed Martin F-35 Ground Electrical Power Interface Document (Document Nu. 2ZEU00004, Rev-0007)
2.4 Unified Facilities Guide Specifications (UFGS) 26 35 44 -- 270 VDC Solid State Ground Power Unit
2.5 National Fire Protection Association (NFPA) 70 – National Electric Code
3.0 Requirements
3.1 The Contractor shall deliver 480VAC to 270VDC Power Converters with cables and support equipment as described below and in accordance with the Applicable Documents and Guidelines in SOW paragraph 2.0.
3.1.1 Five (5) each VAC to VDC Converters meeting the requirements described in Paragraph 3.1. The power converters shall be in accordance with the F-35 Ground Electric Power Interface Document described in Paragraph 2.3 above, and meeting the requirements of MIL-STD-704F, UFGS 26 35 44 and NFPA 70. The Enclosure shall meet the requirements of NEMA Level 4 or Level 3 with windblown dust protection. Delivery shall include Standard Users Manuals in contractor format.
3.1.2 Three (3) each 75 foot, 270 VDC Cables in accordance with paragraph 3.2.9 of the Interface Document referenced in Paragraph 2.3 above.
3.1.3 Two (2) each 100 foot, 270 VDC Cables in accordance with paragraph 3.2.9 of the Interface Document referenced in Paragraph 2.3 above.
3.1.4 Five (5) each Ground mounted stand-alone Aircraft Cable Hangars.
3.2 Upon completion of all necessary installation the Government will schedule a start-up and commissioning with the contractor. The commissioning shall include full run through of the system to verify its operation in accordance with the performance requirements as described above. It shall also include on-site hands-on training for to up to six persons on the operation of the system after completion of the commissioning process.
4.0 Special Considerations.
4.1 Security Classification. All hardware and commissioning provided by the contractor are unclassified.
Section D - Packaging and Marking
| D-TXT-03 | PACKAGING AND MARKING OF SHIPMENTS (APR 2002) |
| The Contractor shall preserve, package and mark all shipments in accordance with ASTM (American Society of Testing and Materials) D3951-98, Standard Practice for Commercial Packaging. |
Section E - Inspection and Acceptance
INSPECTION AND ACCEPTANCE TERMS
Supplies/services will be inspected/accepted at:
| CLIN |
| INSPECT AT |
| INSPECT BY |
| ACCEPT AT |
| ACCEPT BY |
| 0001 |
| Destination |
| Government |
| Destination |
| Government |
| 0002 |
| Destination |
| Government |
| Destination |
| Government |
CLAUSES INCORPORATED BY REFERENCE
| 252.246-7000 |
| Material Inspection And Receiving Report |
| MAR 2008 |
CLIN INSPECTION AND ACCEPTANCE TERMS
CLINs 0001 and 0002 shall include destination inspection of the supplies to be furnished hereunder and shall be conducted at the ship to address listed in section f of the contract. Final acceptance shall be in accordance with execution of an unconditional DD Form 250, Material Inspection and Receiving Report.
Section F - Deliveries or Performance
DELIVERY INFORMATION
| CLIN |
| DELIVERY DATE |
| QUANTITY |
| SHIP TO ADDRESS |
| DODAAC / CAGE |
| 0001 |
| 120 dys. ADC |
| 1 |
| CDR NAWCWD CODE 491D00D |
SCOTT TURNER
ATTN: SCOTT TURNER
1024 BLANDY AVE
HANGAR 5
CHINA LAKE CA 93555-6100
760-939-5000 FOB: Destination N68936
| 0002 |
| 120 dys. ADC |
| 1 |
| (SAME AS PREVIOUS LOCATION) |
FOB: Destination N68936
| 52.211-17 |
| Delivery of Excess Quantities |
| SEP 1989 |
| 52.242-15 |
| Stop-Work Order |
| AUG 1989 |
| 52.247-34 |
| F.O.B. Destination |
| NOV 1991 |
Section G - Contract Administration Data
| 252.232-7006 | WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) | |
| (a) Definitions, as used in this clause-- | ||
| "Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization. | ||
| "Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). | ||
| "Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system. | ||
| (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. | ||
| (c) WAWF access. To access WAWF, the Contractor shall-- | ||
| (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and | ||
| (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. | ||
| (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/. | ||
| (e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol. | ||
| (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: | ||
| (1) Document type. The Contractor shall use the following document type(s): COMBO | ||
| (Contracting Officer: Insert applicable document type(s). Note: If a "Combo" document type is identified but not supportable by the Contractor's business systems, an "Invoice" (stand-alone) and "Receiving Report" (stand-alone) document type may be used instead.) | ||
| (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer: N68936 | ||
| (Contracting Officer: Insert inspection and acceptance locations or "Not applicable.") | ||
| (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. |
| Routing Data Table* | |||
| Field Name in WAWF | Data to be entered in WAWF | ||
| Pay Official DoDAAC: | N64141 | ||
| Issue By DoDAAC: | N68936 | ||
| Admin DoDAAC: | N68936 | ||
| Inspect By DoDAAC: | |||
| Ship To Code: | N68936 | ||
| Ship From Code: | |||
| Mark For Code: | |||
| Service Approver (DoDAAC): | |||
| Service Acceptor (DoDAAC): | |||
| Accept at Other DoDAAC: | |||
| LPO DoDAAC: | |||
| DCAA Auditor DoDAAC: | |||
| Other DoDAAC(s): | |||
| (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. | |||
| (5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. |
POC: Anila Paul anila.paul@navy.mil ALT POC:Scott Turner scott.turner@navy.mil
| (g) WAWF point of contact.(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact: N/A | |
| (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. |
| G-TXT-01 | ATTENTION! E-MAIL ADDRESS REQUIRED FOR DISTRIBUTION |
| All Naval Air Warfare Center Weapons Division Contracts/ Purchase Orders and other related documents are now distributed by electronic mail. | |
| Please provide the e-mail address to which distribution of contracts/purchase orders should be made. | |
| E-Mail Address:______________________________ |
Section I - Contract Clauses
| 52.203-3 |
| Gratuities |
| APR 1984 |
| 52.203-6 Alt I |
| Restrictions On Subcontractor Sales To The Government (Sep 2006) -- Alternate I |
| OCT 1995 |
| 52.203-19 |
| Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements |
| JAN 2017 |
| 52.204-4 |
| Printed or Copied Double-Sided on Postconsumer Fiber Content Paper |
| MAY 2011 |
| 52.204-7 |
| System for Award Management |
| OCT 2016 |
| 52.204-10 |
| Reporting Executive Compensation and First-Tier Subcontract Awards |
| OCT 2016 |
| 52.204-16 |
| Commercial and Government Entity Code Reporting |
| JUL 2016 |
| 52.204-18 |
| Commercial and Government Entity Code Maintenance |
| JUL 2016 |
| 52.204-19 |
| Incorporation by Reference of Representations and Certifications. |
| DEC 2014 |
| 52.204-21 |
| Basic Safeguarding of Covered Contractor Information Systems |
| JUN 2016 |
| 52.204-22 |
| Alternative Line Item Proposal |
| JAN 2017 |
| 52.209-6 |
| Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment |
| OCT 2015 |
| 52.209-10 |
| Prohibition on Contracting With Inverted Domestic Corporations |
| NOV 2015 |
| 52.212-4 |
| Contract Terms and Conditions--Commercial Items |
| JAN 2017 |
| 52.219-8 |
| Utilization of Small Business Concerns |
| NOV 2016 |
| 52.222-3 |
| Convict Labor |
| JUN 2003 |
| 52.222-19 |
| Child Labor -- Cooperation with Authorities and Remedies |
| JAN 2018 |
| 52.222-21 |
| Prohibition Of Segregated Facilities |
| APR 2015 |
| 52.222-26 |
| Equal Opportunity |
| SEP 2016 |
| 52.222-35 |
| Equal Opportunity for Veterans |
| OCT 2015 |
| 52.222-36 |
| Equal Opportunity for Workers with Disabilities |
| JUL 2014 |
| 52.222-37 |
| Employment Reports on Veterans |
| FEB 2016 |
| 52.222-40 |
| Notification of Employee Rights Under the National Labor Relations Act |
| DEC 2010 |
| 52.222-50 |
| Combating Trafficking in Persons |
| MAR 2015 |
| 52.222-54 |
| Employment Eligibility Verification |
| OCT 2015 |
| 52.223-5 |
| Pollution Prevention and Right-to-Know Information |
| MAY 2011 |
| 52.223-18 |
| Encouraging Contractor Policies To Ban Text Messaging While Driving |
| AUG 2011 |
| 52.225-13 |
| Restrictions on Certain Foreign Purchases |
| JUN 2008 |
| 52.232-33 |
| Payment by Electronic Funds Transfer--System for Award Management |
| JUL 2013 |
| 52.232-39 |
| Unenforceability of Unauthorized Obligations |
| JUN 2013 |
| 52.232-40 |
| Providing Accelerated Payments to Small Business Subcontractors |
| DEC 2013 |
| 52.233-3 |
| Protest After Award |
| AUG 1996 |
| 52.233-4 |
| Applicable Law for Breach of Contract Claim |
| OCT 2004 |
| 52.242-13 |
| Bankruptcy |
| JUL 1995 |
| 52.252-2 |
| Clauses Incorporated By Reference |
| FEB 1998 |
| 52.252-6 |
| Authorized Deviations In Clauses |
| APR 1984 |
| 252.203-7000 |
| Requirements Relating to Compensation of Former DoD Officials |
| SEP 2011 |
| 252.203-7002 |
| Requirement to Inform Employees of Whistleblower Rights |
| SEP 2013 |
| 252.204-7003 |
| Control Of Government Personnel Work Product |
| APR 1992 |
| 252.204-7006 |
| Billing Instructions |
| OCT 2005 |
| 252.204-7012 |
| Safeguarding Covered Defense Information and Cyber Incident Reporting |
| OCT 2016 |
| 252.204-7014 |
| Limitations on the Use or Disclosure of Information by Litigation Support Contractors |
| MAY 2016 |
| 252.204-7015 |
| Notice of Authorized Disclosure of Information for Litigation Support |
| MAY 2016 |
| 252.209-7004 |
| Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism |
| OCT 2015 |
| 252.223-7008 |
| Prohibition of Hexavalent Chromium |
| JUN 2013 |
| 252.225-7001 |
| Buy American And Balance Of Payments Program-- Basic |
| DEC 2017 |
| 252.225-7002 |
| Qualifying Country Sources As Subcontractors |
| DEC 2017 |
| 252.225-7012 |
| Preference For Certain Domestic Commodities |
| DEC 2017 |
| 252.225-7048 |
| Export-Controlled Items |
| JUN 2013 |
| 252.232-7001 |
| Disposition Of Payment |
| DEC 1991 |
| 252.232-7003 |
| Electronic Submission of Payment Requests and Receiving Reports |
| JUN 2012 |
| 252.232-7010 |
| Levies on Contract Payments |
| DEC 2006 |
| 252.239-7001 |
| Information Assurance Contractor Training and Certification |
| JAN 2008 |
| 252.243-7001 |
| Pricing Of Contract Modifications |
| DEC 1991 |
| 252.243-7002 |
| Requests for Equitable Adjustment |
| DEC 2012 |
| 252.244-7000 |
| Subcontracts for Commercial Items |
| JUN 2013 |
| 252.244-7001 Alt I |
| Contractor Purchasing System Administration (May 2014) --Alternate I |
| MAY 2014 |
| 252.246-7007 |
| Contractor Counterfeit Electronic Part Detection and Avoidance System |
| AUG 2016 |
| 252.246-7008 |
| Sources of Electronic Parts |
| MAY 2018 |
| 252.247-7023 |
| Transportation of Supplies by Sea |
| APR 2014 |
| 252.247-7024 |
| Notification Of Transportation Of Supplies By Sea |
| MAR 2000 |
| 52.212-5 | CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (DEVIATION 2013-O0019)(JAN 2018 2017) - ALT I (FEB 2000) | |
| (a) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-- | ||
| (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015)(41 U.S.C. 3509). | ||
| (ii) 52.219-8, Utilization of Small Business Concerns (Nov 2016)(15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. | ||
| (iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014)(E.O. 13495). Flow down required in accordance with paragraph (1) of FAR Clause 52.222-17. | ||
| (iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). | ||
| (v) 52.222-26, Equal Opportunity (Sep 2016)(E.O. 11246). | ||
| (vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212). | ||
| (vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014)(29 U.S.C. 793). | ||
| (viii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017)(E.O. 13706). | ||
| (ix) 52.222-37, Employment Reports on Veterans (Feb 2016)(38 U.S.C. 4212). | ||
| (x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010)(E.O. 13496). Flow down required in accordance with paragraph (f) of clause 52.222-40. | ||
| (xi) 52.222-41, Service Contract Labor Standards (May 2014)(41 U.S.C. Chapter 67). | ||
| (xii)[ ](A) 52.222-50, Combating Trafficking in Persons (Mar 2015)(22 U.S.C. chapter 78 and E.O. 13627). | ||
| [ X ](B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. 78 and E.O. 13627). | ||
| (xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standard to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. Chapter 67). | ||
| (xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standard to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. Chapter 67). | ||
| (xv) 52.222-54, Employment Eligibility Verification (Oct 2015). | ||
| (xvi) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015)(E.O. 13658). | ||
| (xvii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706). | ||
| (xviii)(A) 52.224-3, Privacy Training (Jan 2017)(5 U.S.C. 552a) | ||
| (B) Alternate I (Jan 2017) of 52.224-3. | ||
| (xix) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). | ||
| (xx) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014)(42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. | ||
| (xxi) 52.247-64, Preference for Privately-Owned U.S.- Flag Commercial Vessels (Feb 2006)(46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. | ||
| (b) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. |
| 252.211-7003 | ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016) | ||||
| (a) Definitions. As used in this clause-- | |||||
| “Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. | |||||
| “Concatenated unique item identifier” means-- | |||||
| (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or | |||||
| (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. | |||||
| “Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200(ECC200) specification found within International Standards Organization (ISO)/ International Electrotechnical Commission (IEC) 16022. | |||||
| “Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. | |||||
| “DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. | |||||
| “DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. | |||||
| “Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. | |||||
| “Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency. | |||||
| “Government's unit acquisition cost” means-- | |||||
| (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; | |||||
| (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and | |||||
| (3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery. | |||||
| “Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459. | |||||
| “Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier. | |||||
| “Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. | |||||
| “Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. | |||||
| “Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. | |||||
| “Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. | |||||
| “Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. | |||||
| “Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. | |||||
| “Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. | |||||
| “Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. | |||||
| “Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. | |||||
| “Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. | |||||
| “Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. | |||||
| “Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. | |||||
| (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. | |||||
| (c) Unique item identifier. | |||||
| (1) The Contractor shall provide a unique item identifier for the following: | |||||
| (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items: | |||||
| Contract Line, Subline, or Exhibit Line Item Number Item Description | |||||
| ________________________________________________________________________________ | |||||
| ________________________________________________________________________________ | |||||
| ________________________________________________________________________________ | |||||
| (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: | |||||
| Contract Line, Subline, or Exhibit Line Item Number Item Description | |||||
| __________________________________________________________________________________ | |||||
| __________________________________________________________________________________ | |||||
| __________________________________________________________________________________ | |||||
| (If items as identified in the Schedule, insert "See Schedule" in this table.) | |||||
| (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ______. | |||||
| (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ______. | |||||
| (v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identified for traceability. | |||||
| (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. | |||||
| (3) The unique item identified component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification. | |||||
| (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-- | |||||
| (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: | |||||
| (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. | |||||
| (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. | |||||
| (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and | |||||
| (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology--Transfer Syntax for High Capacity Automatic Data Capture Media. | |||||
| (5) Unique item identifier. | |||||
| (i) The Contractor shall-- | |||||
| (A) Determine whether to-- | |||||
| (1) Serialize within the enterprise identifier; | |||||
| (2) Serialize within the part, lot, or batch number; or | |||||
| (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and | |||||
| (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; | |||||
| (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and | |||||
| (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. | |||||
| (ii) The issuing agency code-- | |||||
| (A) Shall not be placed on the item; and | |||||
| (B) Shall be derived from the data qualifier for the enterprise identifier. | |||||
| (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, either as part of the Material Inspection and Receiving Report, the following information: | |||||
| (1) Unique item identifier. | |||||
| (2) Unique item identifier type. | |||||
| (3) Issuing agency code (if concatenated unique item identifier is used). | |||||
| (4) Enterprise identifier (if concatenated unique item identifier is used). | |||||
| (5) Original part number (if there is serialization within the original part number). | |||||
| (6) Lot or batch number (if there is serialization within the lot or batch number). | |||||
| (7) Current part number (optional and only if not the same as the original part number). | |||||
| (8) Current part number effective date (optional and only if current part number is used). | |||||
| (9) Serial number (if concatenated unique item identifier is used). | |||||
| (10) Government's unit acquisition cost. | |||||
| (11) Unit of measure. | |||||
| (12) Type designation of the item as specified in the contract schedule, if any. | |||||
| (13) Whether the item is an item of Special Tooling or Special Test Equipment. | |||||
| (14) Whether the item is covered by a warranty. | |||||
| (e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: | |||||
| (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. | |||||
| (2) Unique item identifier of the embedded subassembly, component, or part. | |||||
| (3) Unique item identifier type.** | |||||
| (4) Issuing agency code (if concatenated unique item identifier is used).** | |||||
| (5) Enterprise identifier (if concatenated unique item identifier is used).** | |||||
| (6) Original part number (if there is serialization within the original part number).** | |||||
| (7) Lot or batch number (if there is serialization within the lot or batch number).** | |||||
| (8) Current part number (optional and only if not the same as the original part number).** | |||||
| (9) Current part number effective date (optional and only if current part number is used).** | |||||
| (10) Serial number (if concatenated unique item identifier is used).** | |||||
| (11) Description. | |||||
| ** Once per item. | |||||
| (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: | |||||
| (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. | |||||
| (2) Embedded items shall be reported by one of the following methods-- | |||||
| (i) Use of the embedded items capability in WAWF; | |||||
| (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or | |||||
| (iii) Via WAWF as a deliverable attachment for exhibit line item number 0001, Unique Item Identified Report for Embedded Items, Contract Data Requirements List, DD Form 1423. | |||||
| (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. |
Section K - Representations, Certifications and Other Statements of Offerors
| 52.203-18 |
| Prohibition on Contracting With Entities That Require Certain Internal Confidentiality Agreements or Statements--Representation |
| JAN 2017 |
| 52.204-5 |
| Women-Owned Business (Other Than Small Business) |
| OCT 2014 |
| 52.207-4 |
| Economic Purchase Quantity-Supplies |
| AUG 1987 |
| 52.209-11 |
| Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law |
| FEB 2016 |
| 52.215-6 |
| Place of Performance |
| OCT 1997 |
| 52.222-18 |
| Certification Regarding Knowledge of Child Labor for Listed End Products |
| FEB 2001 |
| 52.222-22 |
| Previous Contracts And Compliance Reports |
| FEB 1999 |
| 52.222-25 |
| Affirmative Action Compliance |
| APR 1984 |
| 52.225-18 |
| Place of Manufacture |
| MAR 2015 |
| 52.225-25 |
| Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications. |
| OCT 2015 |
| 252.203-7005 |
| Representation Relating to Compensation of Former DoD Officials |
| NOV 2011 |
| 252.209-7993 (Dev) |
| Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law -- Fiscal Year 2014 Appropriations (Deviation) |
| FEB 2014 |
| 252.215-7008 |
| Only One Offer |
| OCT 2013 |
| 252.222-7007 |
| Representation Regarding Combating Trafficking in Persons |
| JAN 2015 |
| 252.225-7031 |
| Secondary Arab Boycott Of Israel |
| JUN 2005 |
| 252.225-7050 |
| Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism |
| JAN 2018 |
| 252.247-7022 |
| Representation Of Extent Of Transportation Of Supplies By Sea |
| AUG 1992 |
52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS (NOV 2017) - ALTERNATE I (OCT 2014) An offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certifications electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the offeror shall complete only paragraphs (c) through (u) of this provision.
| (a) Definitions. As used in this provision: | ||||
| "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. | ||||
| "Forced or indentured child labor" means all work or service-- | ||||
| (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or | ||||
| (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. | ||||
| "Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. | ||||
| "Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. | ||||
| "Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). | ||||
| "Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except-- | ||||
| (1) PSC 5510, Lumber and Related Basic Wood Materials; | ||||
| (2) Product or Service Group (PSG) 87, Agricultural Supplies; | ||||
| (3) PSG 88, Live Animals; | ||||
| (4) PSG 89, Subsistence; | ||||
| (5) PSC 9410, Crude Grades of Plant Materials; | ||||
| (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; | ||||
| (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; | ||||
| (8) PSC 9610, Ores; | ||||
| (9) PSC 9620, Minerals, Natural and Synthetic; and | ||||
| (10) PSC 9630, Additive Metal Materials. | ||||
| "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. | ||||
| "Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor. | ||||
| "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-- | ||||
| (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; | ||||
| (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; | ||||
| (3) Consist of providing goods or services to marginalized populations of Sudan; | ||||
| (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; | ||||
| (5) Consist of providing goods or services that are used only to promote health or education; or | ||||
| (6) Have been voluntarily suspended. | ||||
| "Sensitive technology"-- | ||||
| (1) Means hardware, software, telecommunications equipment, or any other technology which is to be used specifically-- | ||||
| (i) To restrict the free flow of unbiased information in Iran; or | ||||
| (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and | ||||
| (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3). | ||||
| "Service-disabled veteran-owned small business concern"-- | ||||
| (1) Means a small business concern- | ||||
| (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and | ||||
| (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. | ||||
| (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). | ||||
| "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. | ||||
| "Small disadvantaged business concern" consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that -- | ||||
| (1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by -- | ||||
| (i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and | ||||
| (ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); | ||||
| (2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition. | ||||
| "Subsidiary" means an entity in which more than 50 percent of the entity is owned-- | ||||
| (1) Directly by a parent corporation; or | ||||
| (2) Through another subsidiary of a parent corporation. | ||||
| "Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances. | ||||
| "Veteran-owned small business concern" means a small business concern- | ||||
| (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and | ||||
| (2) The management and daily business operations of which are controlled by one or more veterans. | ||||
| "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. | ||||
| "Women-owned small business concern" means a small business concern - | ||||
| (1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and | ||||
| (2) Whose management and daily business operations are controlled by one or more women. | ||||
| "Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. | ||||
| (b)(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. | ||||
| (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs [_________].[Offeror to identify the applicable paragraphs at (c) through (u) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM. | ||||
| (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. | ||||
| (1) Small business concern. The offeror represents as part of its offer that it [ ] is, [ ] is not a small business concern. | ||||
| (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ] is, [ ] is not a veteran-owned small business concern. | ||||
| (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [ ] is, [ ] is not a service-disabled veteran-owned small business concern. | ||||
| (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it [ ] is, [ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. | ||||
| (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ] is, [ ] is not a women-owned small business concern. | ||||
| Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. | ||||
| (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-- | ||||
| (i) It [ ] is, [ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and | ||||
| (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture.[The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture:_______________________________________________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. | ||||
| (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-- | ||||
| (i) It [ ] is, [ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and | ||||
| (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ______________________________________ .] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. | ||||
| (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.]. The offeror represents that it [ ] is, a women-owned business concern. | ||||
| (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:___________________________. | ||||
| (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-- |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.