Attachment__2_Statement_of_Work.pdf
PDF 160 KB Posted
- Attached to
- Capsule Loading Covers Federal contract opportunity
- Solicitation number
- N66604-19-Q-2067
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment__3_CDRLs.pdf | ||
| Attachment__1_Sole_Source_Justification.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
Capsule Loading Covers
1.0 BACKGROUND
The Missiles/Precision Strike Division, Platform and Payload Integration Department, of the
Naval Undersea Warfare Center Division, Newport, (NUWCDIVNPT) has ownership of the
Capsule Loading Cover (CLC). The CLC is used to protect the TOMAHAWK Capsule
Launching System (CLS) Capsule Closure Assembly (CCA) during shipboard and pier side handling. The CLC replaces the more robust Closure Protective Cover (CPC), which is used for shipping and storage of a CLS All-Up-Round and was developed by NUWCDIVNPT engineers as a lighter and more manageable alternative to the CPC for loading and handling.
2.0 SCOPE
The contractor shall provide the facilities, fabrication services, and material required to manufacture, test, and inspect forty (40) Capsule Loading Covers (CLCs)
3.0 APPLICABLE DOCUMENTS
The contractor shall perform the tasking required in Section 4.0 in accordance with the below
Applicable Documents.
3.1 Drawing Package for JCM-17759 (Rev “L”) – Cover, Capsule Loading Assembly.
4.0 REQUIREMENTS
In accordance with the Applicable Document in Section 3.0, the contractor shall manufacture 40
CLCs. The use of Exell D material by Sabic for the hemisphere is acceptable and may be used with a deviation. Likewise, the use of XL102UV for the Umbilical Cable steps will be acceptable as well. Upon completion, the contractor shall test each CLC (CDRL A001:DI-NDTI-
80809B) (CDRL A002: DI-MISC-81356A.
4.1 The contractor shall deliver a Test/Inspection Report (CDRL A001: DI-NDTI-80809B) and shall include material validation/ certification documentation for all parts used in the buildup of the CLCs (CDRL A002:DI-MISC-81356A).
6.0 GOVERNMENT FURNISHED MATERIAL
The following Government Furnished Material will be made available under this order.
6.1 SHEET, POLYCARBONATE, UV RESISTANT 6 MM, Part Number: JCM-17758 /
LEXAN-XL-102UV, Polycarbonate Sheet, 0.236" X 48" X 96" Graylite 7123 – QTY (2 Sheets)
6.2 SHEET, POLYCARBONATE, UV RESISTANT 9-1/2 MM, Part Number: JCM-17756 /
Lexan Exell D UV, Polycarbonate Sheet, 0.374" X 80.71" x 120" Gray UV Resistant (In-House at vendor)
6.3 Foam Liner, P/N JCM-16592, QTY 1 Roll (In-House at vendor)
File details come from the government source that posted it.