DRAFT_SOW_-_SEMCO_0300.doc

ADVANCED TELEMETRY SYSTEM – CLASSIFIED/UNCLASSIFIED (ATS-C/U)

SEMCO PHTS108A Portable Telemetry Simulator

1. INTRODUCTION

The Naval Surface Warfare Center (NSWC), Corona Division, Performance Assessment Department, Code PA44 requires four SEMCO PHTS108A portable telemetry RF simulator and test unit used on the ADVANCED TELEMETRY SYSTEM – CLASSIFIED/UNCLASSIFIED (ATS-C/U) in support of missile testing for various RDT&E projects. The SEMCO PHTS108A is an integral component of our shipboard portable ADVANCED TELEMETRY SYSTEM – CLASSIFIED/UNCLASSIFIED (ATS-C/U). This system will be used to simulate and test the readiness of portable telemetry equipment to support missile exercises. TM data is used in the performance and readiness assessment of Fleet combat systems during these exercises.

2. BACKGROUND

The NSWC Telemetry Systems Branch (PA44) facility at Corona has a requirement to support the missile testing for RDT&E projects at various missile test ranges beginning immediately. In order to meet this requirement, Naval Surface Warfare Center (NSWC), Corona Division, Performance Assessment Department, Code PA44 requires the SEMCO PHTS108A listed in the specifications to be fully integrated by October 1, 2017 in our ATS -C/U portable telemetry system. The items listed in this SOW are a hard requirement in order to successfully execute the missions on the schedule for this project.

3. SCOPE

1.0

2.0

PHTS108A

AH1450-02D-06

Portable Hand Held Telemetry Simulator

Omni Dipole Antenna

4. APPLICABLE DOCUMENTS

N/A

5. REQUIREMENTS

The SEMCO PHTS108A and AH1450-02D-06, as components of the NSWC Corona ADVANCED TELEMETRY SYSTEM - CLASSIFIED/UNCLASSIFIED (ATS-C/U), are required to meet or exceed the following requirements:

TECHNICAL DETAILS:

PHTS108A

· Frequency Range of Transmitter: 1435.5Mhz – 2395.5Mhz

· Transmitter Power Range: -100.dBm to +5dBm (w/user specified input to the tenth of 1dB)

· Modulations: PCM/FM, BPSK, QPSK, SOQPSK-TG, Multi-h CPM

· Ability to Randomize data to transmitter

· Built in Bit Sync

· Built in Frame Sync and Frame Structure Generation & Reception

· BERT and PN Pattern Generator.

· Binary File playback

· External Modulation

· 12” touch screen control

· Embedded non-windows processor

· Network SW with ability for remote control

· AC power 110-240VAC auto sensing

· 9-36 VDC rechargeable battery power

· 13.5” W x 9” H x 4” D and < 15lbs with battery pack

· Ruggedized portable carrying case

AH1450-02D-06

- Omni Dipole Antenna:

- 1435-5250 MHz

- 0dB Gain

- 2.2:1 VSWR

- 5W Max. input power

- “N” Connectors

- 7.8” L x 1.5” W

WARRANTY DESCRIPTION:

The SEMCO PHTS108A includes two (2) years hardware warranty and lifetime software support. Additionally, all SEMCO PHTS108A include technical support and software/firmware upgrades at no charge for the life of the system.