SOW_-_Draft_3.0.pdf

Rev 3/31/16

Statement of Work Joint Warfare Assessment Laboratory (JWAL)

Video System Upgrade – Video LED Tiles

1. INTRODUCTION

The Naval Surface Warfare Center Corona Division, (NSWC CORDIV), Range Systems Department, Code RS10 requires telecommunications Infrastructure operating materials and supplies (OM&S) in support of Naval Test and Training Range systems. Items are of infrastructure class and type of OM&S required to design, build, deliver and maintain telecommunications systems.

2. BACKGROUND

RS10 has a requirement to upgrade the Video Display System (VDS) at the NSWC Corona Joint Warfare Assessment Lab (JWAL) Theater. The existing system was installed in 1993 and cannot support the number of data and video sources required during mission support. The system is currently at the end of life; it is not expandable and does not provide the capability to support additional users.

3. SPECIFICATIONS

RS10 has been tasked to design, procure and install a new video display system capable of more users, more data and video sources, supporting HDMI interfaces and digital video. In order to meet these requirements, RS10 requires the Video LED tiles and ancillary material listed in this SOW.

The items are considered brand name or equal:

CLIN Qty Brand Part Number Part Description 0001 148 PixelFlex FLEXLite NXG

3.9mm LED Full Tile 3.9mm pixel pitch LED Tile (Full Tile)- 1920Hz Refresh Rate-30 lbs per tile- 500mm x 1000mm / 1.64' x 3.28'-IP30-1500 Nit-Spare modules included

0002 37 PixelFlex FLEXLite NXG 3.9mm LED Half Tile

3.9mm pixel pitch LED Tile (half Tile)- 1920Hz Refresh Rate-15 lbs per tile- 500mm x 500mm / 1.64' x 1.64'-IP30-1500 Nit-spare modules included

0003 11 PixelFlex SU-401 4 output LED Sending Control w/Front surface control

0004 40 PixelFlex FLEX Lite NXG Hanging Bracket C

Hanging Bracket C

0005 4 PixelFlex FLEX Lite NXG Hanging Bracket L/R

Hanging Bracket L/R

Salient Characteristics:

The system shall meet the following requirements:

Compliance

• All material shall comply with the Trade Agreements Act

• HDCP compliant

Interfaces

• Include HDMI input for video source to LED tile control unit (sending unit)

• Wireless connectivity to rack equipment or LED tiles is prohibited

Performance:

• Stacked resolution: 4500 x 1080 (width x height) minimum

• Brightness: 800 NITS minimum

• Contrast Ratio: 2500:1 minimum

DRAFT

• Refresh Rate: 1440 Hz minimum

• Display Colors: 16 bit (281 trillion)

• Horizontal Viewing angle: 140° minimum

• Vertical Viewing angle: 140° minimum

• LED Packaging: 3 in 1 LED type (1R1G1B)

• LED life of 100,000 hours to half brightness

Shall include 5% sparing of LED modules Color/brightness: replacement modules shall match existing tiles automatically (for at least the first 5 years after installation)

Redundancy

• Data path redundancy is planned; in the event a tile becomes non-operational, the sequential tiles in the daisy chain shall not lose their image.

• The redundant sending unit (or secondary sending unit), shall not require additional video input from the video source but shall receive required video stream data from the primary sending unit.

Physical Characteristics

• Dimensions:

Overall Tile Canvas Width: the video display shall not exceed 60 FT, shall not occupy less than 59 FT Overall Tile Canvas Height: the video display shall not exceed 14 FT 10 in, shall not occupy less than

14 FT

Overall Tile Canvas Weight: the total weight of the LED Tile system shall not exceed 5000 lbs Tile Stacking Height capacity: minimum 15 FT. Individual LED tiles shall be able to interlock with adjacent tiles using cam locks or magnets

• Installation Option: Hanging

• Power and Heat:

Input: 110 VAC, Line to Neutral or 208 VAC, Line to Line Max current draw per panel daisy chain: 20A Power draw, on average, shall not exceed 60-70% of maximum Tile canvas shall not exceed 30 x 20A circuits.

Necessary interconnect power and data cables shall be included with the display system Heat output: shall not exceed 150,000 BTU/hr

• Serviceability

Rear-only serviceability: tile modules, circuitry, and power supply shall be rear serviceable

CLIN 003: SU-401 Sending Controller Shall include the following:

• Provide access to full screen adjustments from the unit without the need of a computer

• DVI and HDMI input and output sources

• Four CAT5 Ethernet outputs for primary and redundancy data paths of multiple LED displays

• HDCP compliant

• Retrievable configuration file to aid in unit replacement

• Controls canvas space of 1920x1080 pixels

• Supports unit redundancy (in case unit fails a secondary unit shall take control of the LED tiles under control of the primary unit) for units controlling a total of 11% of the bottom LED tile canvas redundancy is not required

• Maximum occupancy: Units required shall not exceed 15 RUs of vertical space in a standard 19” wide rack

• Energy conservation: When sending units are not receiving video the LED’s shall be “off” so as to consume minimal power

CLIN 004 and 005:

• Display system shall be mounted using FLEX Lite NXG Hanging Bracket C and FLEX Lite NXG Hanging Bracket L/R or equivalent

• Mounting hardware shall sustain minimum 5000 lbs.

• Installation Option: Hanging, shall allow for rear-only serviceability.

8. ACRONYM LIST

ACRONYM DENOTATION

1R1G1B 1 Red, 1 Green, 1 Blue HDCP High-Bandwidth Digital Content Protection JWAL Joint Warfare Assessment Laboratory RU Rack Units, 1 RU= 1.75 in RS Range Systems TAA Trade Agreements Act VDS Video Display System