Technical_Capability_Certs_Attachment_1_Revised.pdf

N42158-19-Q-0004 ATTACHMENT 1

TECHNICAL CAPABILITY CERTIFICATIONS

Vendor shall self-certify that the equipment and services proposed either meets or does not meet the Government’s minimum requirements specified in the associated Statement of Work (SOW) reference by initialing in the “YES” or “NO” area of the chart below.

Any deviation to the Government specifications shall be identified as such – A detailed explanation shall be provided for each negative response.

Note: In order to be considered for award, the table must be completed in its entirety and submitted with your quotation in accordance with FAR 52.212-1 Instructions of Offerors ADDENDUM.

In order to be considered technically acceptable, this form must be completed in its entirety.

Vendor shall certify that his product meets or does not meet each specification listed above by initialing in the applicable YES or NO box beside each specification.

Print Name Signature

Vendor’s Certification is as of __________________.

Date

Company Name

Technical Capabilities Statement Item #1 Specifications for Four (4) 9000 CFM Dehumidification Units Shall be provided with the following capabilities, features, and specifications: YES NO Provide and deliver four (4) 9000 or 10000 CFM Dehumidification Units Unit is electrically powered maximum of 400 amps @ 460V, 3 phase, 60HZ.

Maximum size 212” LG X 106” W X 94”HT, Maximum weight 5,000 lb.

Provide Dimensions____________________

Has stenciled gross weight on all four (4) sides Process air inlet and process air outlet 17 ½” OD Desiccant wheel with reactivation blower or with resistive blower.

Specify which________________

Able to remove 200 lb./hr. of moisture at 50% RH and 9,000 CFM Has forklift pockets and 4 point certified lift frame required Has rigging and lifting sketch to be given after award Rigging meets NAVFAC P-307 standards Electrical Panel in NEMA 4 metal enclosure with lockable disconnect and Cam-

Lock Cords.

Unit shall be equipped with Rain-tight enclosure. All exposed components must be weather resistant

• Has two (2) 18” DIA X 25” LG insulated flex ducts or with two (2) 20” DIA X 25’ LG insulated flex ducts.

Rental usage is intended for constant 24 hours at 7 days week.

Has pad eyes for crane movement or forklift slots for forklift movement Has Hook-up electrical connection to internal of unit on dehumidifier Model # JTS-MCS-9000-E or Equivalent

Indicate Model #________________

N42158-19-Q-0004 ATTACHMENT 1