SOW.doc

Statement of Work A. Background The use of NAVAIR METCAL equipment funding is to procure Calibration Standards (CALSTDs) and ancillary equipment for Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities and Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate (I) level maintenance assets. All Cal Standards listed for procurement must first go through an approval process. This process includes: initial submission by the fleet; review and prioritization by the Fleet TYCOM’s; laboratory workload justification and standardization review by a NAVAIR METCAL technical review team; overall procurement strategy reviews to assess overall program objectives, priorities and funding.

REQUIREMENTS:

1. Mfr. one-year warranty with a warranty certificate.

2. Calibration Certificate and calibration sticker (as applicable for each unit)

3. Units shall be serialized.

4. Include shipping to destination below.

5. Manufacturer’s Standard Operating and servicing manuals (CD version acceptable) shall be provided with each unit. The DFARS clause listed below must be referenced in all contracts and the manufacturer made aware that the use/reproduction of tech data/manuals (for government use only) will follow these use guidelines.

DFARS SUBPART 227.71 - Rights in Technical Data 6.

The US government shall have limited technical data rights for all technical manuals and documents furnished with the procured commercial items, for the purpose of Government use only in duplicating or posting technical documentation to limited access web sites for use by US Government Personnel and Contractors engaged in maintenance, calibration or related logistics activities associated with the procured commercial items in accordance with DFARS 252.227-7015 Technical Data--Commercial Items.

B. Tasking:

The contractor shall provide the following equipment:

1) P/N 1404-A Primary Standard Capacitor 1000 Pf Qty 10 To include the following:

a) Temperature Coefficient: 2 ±2 ppm/°C from -20°C to +65°C

b) Long Term Drift: less than 20 ppm per year

c) Max Change with Orientation: 10 ppm and completely reversible

d) Dissipation Factor: Less than 10-5 at 1 kHz

e) Residual Impedance:

a. CH: 30 pF

b. CL 28 pF

c. L 0.05 µH

f) Maximum Voltage: 750 V peak.

g) Terminals: Two BNC coaxial connectors (legacy locking G874 coaxial connectors are available). Outer shell of one connector is ungrounded to permit capacitor to be used with external resistor as a dissipation factor standard.

h) Dimensions: (16.9 cm H x 17.2 cm W x 20.4 cm D (6.63" x 6.75" x 8").

i) Weight: 3.9 kg 8.5 lb.

j) ISO-17025 Accredited (A2LA) Calibration with Uncertainties & Data: Included

2) P/N 1422-D Variable Precision Air Capacitors 35 pF - 1150 pF Qty 2 To include the following:

a) Stability: Capacitance change with time <1 scale division (0.02% of full scale) per year. Long-term accuracy can be estimated from the stability and the initial accuracy.

b) Calibration: Measured values (supplied) are obtained by comparison at 1 kHz, with working standards whose absolute values are known to an accuracy of (0.01% + 0.0001 pF). Each comparison is made to a precision better than 0.01%.

c) CAPACITANCE Min 100 35

d) RANGE, pF Max 1150 115

e) SCALE, pF/Division: 0.2

f) Initial Accuracy: Picofarads Direct-Reading (Adjustment): Total Capacitance: ±1.5 ±0.3 C. Deliverables

Delivery of the equipment shall be provided at the following address:

NAVAIR Calibration Standards

(UIC N48535)

BLDG 612, Bay 9 MCAS

Beaufort, SC 29904

D. Delivery Date

Delivery shall be no later than 200 working days after award of contract, and shall be absolutely no later than 12/01/2019 *****Early delivery accepted**** E. Invoicing

a. All invoicing shall be submitting into Wide Area Workflow for payment after all material is received in the condition as stated in section B.