Specs-Milling_Machine.doc
DOC document 28 KB Posted
- Attached to
- Milling Machine Federal contract opportunity
- Solicitation number
- N00421-17-T-0013
About this file
Specs
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Milling_Machine.doc | DOC document | |
| N00421-17-T-0013__MILLING_MACHINE.doc | DOC document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Machine requires offline programming & capability to translate to file ext .dxf and .x_t .
Also required to have conversational machining program capabilities that are intuitive to machinists familiarity with the protoTRACK interface.
Fixture Plates
-- SMALL -16"x15.5", Medium- 16"x 24", and Large-16"x32"
Retention Knobs
- Set of 16. TRAK LPM - CAT 40, TRAK 2OP - 30 Taper
Kurt 6" vise
-The D688T vise has a large 8.8" jaw opening. The machined rail allows precision alignment. The nut does not extend beyond the end of the vise body. Approximately a 20% increase in clamping pressure over the D675 vise.
Fixture Cart
- High quality cart by Huot Manufacturing. Lip height and length matches LPM table position during fixture change.
Converter, Parasolid and DXF Files
-Parasolid and DXF CAD file coverters reduce programming times, conversational language, G-code, CAM, 2 and 3-D CAD conversion software, and Verify Machining Simulation software
Set of Ball Lock Liners and Ball Lock Locating Guide
- For fixture plates. High precision for use with Primary Locating Holes in the TRAK LPM and TRAK 2OP tables.
Integrated JergensR ball locks reduce changeover times
Vise Stop Assembly
-Includes mag base and 1", 2" and 3" extensions.
File details come from the government source that posted it. Updated .