N00253-16-T-0482-0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to answ er vendor questions and extend the closing date to 28 September 2016 at 2:00 pm Pacific time.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Sep-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00253-16-T-0482

X 9B. DATED (SEE ITEM 11)

12-Sep-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Sep-2016

CODE

NAVAL UNDERSEA WARFARE CENTER

ATTN: GINA.MELOY@NAVY.MIL

610 DOWELL STREET, BLDG 206A

KEYPORT WA 98345

N00253 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00253-16-T-0482

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 21-Sep-2016 02:00 PM to 28-Sep-2016 02:00 PM.

The solicitation issue date has changed from 07-Sep-2016 to 12-Sep-2016.

(End of Summary of Changes)

The following items are applicable to this modification:

VENDOR QUESTIONS

Question 1. On drawings 8290660, and 8290661, the items are 3D printed. The problem is the drawings supplied are in 2D PDF. The suppliers are requesting 3D CAD drawings in the following formats: IGS, STP or STL. Are there sample items that can be supplied so we can then 3D scan them and send the info to the 3D printer?

Answer 1. Upon contact award, a 3D CAD file will be supplied in an STL format.

Question 2. Or, another way this can be accomplished is to use the drawings supplied, and CNC Machine these items out of a different material that would be an acceptable replacement for the ULTEM 9085. Would this be acceptable?

Answer 2. Offerors may propose multiple solutions to the requirement. Each alternative must be submitted as a stand-alone offer. All exceptions to the drawing specifications must be clearly identified, in accordance with paragraph 13 of the "INFORMATION FOR OFFERORS" section of the solicitation.

Question 3. The referenced solicitation requires fabrication of Part Numbers 8290660 and 8290661 using fused deposition modeling with ULTEM 9085. Can you tell me whether there are STL files available for the fabrication of these parts? There is quite a large Non-Recurring Engineering Charge (NREC) if those files must be generated from the 2-D files.

Answer 3. Upon contact award, a 3D CAD file will be supplied in an STL format.

Question 4. Can you tell us if the PCB, P/N 8290616, is a multilayer board? If so, how many layers? I couldn't find any indication of this in the documents.

Answer 4. This is a standard double sided board with plated through holes. Traces on top and bottom only, none internal.