N0025316T0260Amend4.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The reason for this amendment is to incorporate the revised Statement of Work (SOW) and extend the closing date.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 28-Jun-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00253-16-T-0260

X 9B. DATED (SEE ITEM 11)

23-May-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

28-Jun-2016

CODE

NAVAL UNDERSEA WARFARE CENTER

ATTN: DIANA L. LASOTA

DIANA.LASOTA@NAVY.MIL

610 DOWELL ST BLDG 206

KEYPORT WA 98345-7610

N00253 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00253-16-T-0260

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been modified:

STATEMENT OF WORK (SOW)

Statement of Work (Revised 06-28-2016)

Background

The purpose of the following work is to conduct a materials suitability study for processing hazardous waste streams using plasma arc waste disposal and vitrification processes. The composition of the resulting byproduct to be disposed of is included as part of the testing.

Hazardous waste as referred to herein shall also include asbestos. The goal of this study is to determine what waste streams can be processed the energy inputs and outputs, and products and its composition of this specific waste treatment process.

Scope

The government shall provide hazardous waste in 55 gallon drums and for each identified hazardous waste stream the work described herein shall be performed. It is the intent of the

Government that a single (primary) contractor be awarded this contract and be responsible for the accomplishment of all work detailed herein. A table of waste streams has been listed on the following page. Waste stream numbers and the exact mass of each stream shall be identified by the government prior to pick up of waste.

Location of Materials

Puget Sound Naval Shipyard and Intermediate Maintenance Facility

1400 Farragut Ave

Bldg. 944, Attn: Code 106.33

Bremerton, WA 98314-5001

The contractor assumes responsibility for the materials at time of pickup. The contractor will be responsible for transporting hazardous waste to their processing plant and process a minimum of

900 to a maximum of 1,100 lbs. of hazardous waste. The contractor shall be responsible for transportation, handling, and processing of all hazardous waste into their engineering-scale plant and process the waste through the entire treatment process. In addition, the contractor shall provide the deliverables as outlined in this document

General Requirements

1. The contractor shall follow all regulations and guidelines as outlined in WAC 173-303.

2. The contractor shall already have a proven out process and demonstrate that their process meets glass material passes land disposal restriction requirements (40 CF 268 and WAC

173-303-140).

3. Contractors and sub-contractors must use facilities and transporters that are on the current

Defense Logistics Agency Disposition Services “Qualified List”

(http://www.dispositionservices.dla.mil/newenv/hwdisposal.shtml). Contractor is required to provide certification to the Agency that the transporter is in compliance with all applicable Federal, state, and local requirements, and possesses all applicable Federal, state, and local permits for transportation of the materials.

4. The contractor shall contact the Government Technical Points of Contact (TPOC) of contact one week in advance of pickup to mutually arrange an acceptable pickup schedule and make arrangements for pickup.

5. Hazardous waste shall be handled, transported, and disposed of in accordance with all

Federal, DOD, DOT, EPA, OSHA, State, and Local rules, laws, and regulations, including all manifest requirements and any additional requirements for the types of waste identified in the waste stream identified herein. Contractor is responsible for training workers in accordance with all Federal (i.e. DOT, EPA, OSHA), State, and Local installation rules, laws, and regulations and for providing and wearing appropriate chemical splash personnel protective clothing (e.g.. TyChem QC), and all appropriate respiration or monitoring equipment when needed.

6. The contractor is solely responsible for all costs and liability resulting from any leak(s) or spill(s) during the pickup, transportation and disposal of waste. The contractor agrees to clean up all spills to the satisfaction of the Navy, Federal, State and Local laws and regulations at no cost to the Navy or generator.

7. The contractor shall prepare an incident (spill) report of any leak(s) or spill(s) occurring during contract performance. This includes but is not limited to; identification of the substance spilled, location, date, quantity, personnel injury involved, clean up procedures implemented, name and telephone numbers of all state, federal and navy personnel contacted; and description of circumstances surrounding the spill incidents. This report shall be sent to the Government TPOC’s.

8. Government shall reserve the right to witness the materials study performed herein.

Contractor shall provide at least two weeks’ notice prior to conducting a study.

9. The contractor will be responsible for all costs and work associated with the disposal of any residual hazardous waste resulting from the process. Disposal must be in accordance with all Federal, DOD, DOT, EPA, OSHA, State, and Local rules, laws, and regulations including but not limited to the Resource Conservation and Recovery Act (RCRA). A copy of a signed manifest must be provided to the Government TPOC for any waste that must be sent out for proper disposal.

Deliverables:

1. A report documenting the following below. Any format delivered by the contractor is acceptable. Units shall be SI unless otherwise indicated.

a. Set up steps required to treat each waste stream (any pre-processing type work).

b. Perform mass balance.

i. In: Waste stream in and any make-up glass added into the system.

ii. Out: Any glass pulled off and the entrained material. Effluent and its composition in terms of mass percentage.

c. Perform energy balance.

i. In: Power to run any ancillary equipment. Power requirements to the reactor (define split between AC and DC supplied).

ii. Out: Lower heating value of effluent gas.

d. Define any recycle streams used in the process, provide the constituents of the recycle stream, purpose of recycle stream, and mass flow rates.

e. Provide information on any additional utilities used, including but not limited to:

process water, steam, etc.

f. Define batch process time: X hours to process X kg.

2. A report documenting sample results from a third party laboratory, to include requirements relating to the third party laboratory’s methods or certifications such as compliance with EPA and state guidelines and/or certification by National Environmental

Laboratory Accreditation Program. Samples are to be taken of vitrified residue following removal from the treatment process for each waste stream. One glass sample taken prior to treating waste and one final glass sample (consisting of all waste streams) shall be sent for testing. Refer to the table below for analytical requirements.

Analytical Methods

ID Analytical Method Notes

A SW-846 EPA Method 1311

B Biological Testing Method, Department of

Ecology Publication # 80-12 static acute fish toxicity test

C NIOSH Test Method 9002

D SW-846 EPA Methods 9013A and 9012B

WSN WS Name Waste Codes Physical State Sample Requirements

DSL-4970 Misc. Debris w/Heavy Metals, No asbestos.

D004, D005, D006, D007, D008, D009, D010, D011, D039, WSC2

Solid A

WSL-5070 Misc Debris w WA State Hazards, Non

ASB

WP01, WT01 Solid B

ILQ-1390 Paint, Varnish, Coatings, Flammable D001, D004, D005, D006, D007, D008, D009, D010, D011, D018, D021, D035

Liquid A

DSL-4901 Asbestos Debris, Filters, Solid, RCRA Metals

D007, D008 Solid A, C

BLQ-4895 Lye Solution and Sludge from Caustic Cleaning Tank

D002, D006, D007, D008 Liquid A

OLQ-1581 Hydrogen Peroxide 20- 60% D001 Liquid none

PLC-6680 Cyanide, Carbonate Treatment Residue, pH of 10-13

F008, D002 Liquid/Sludge A, D

NOTE: The government will ensure that containers of waste streams DSL-4970, WSL-5070, and DSL-4901 will not exceed 500 ppm VOCs.

Optional Service: The following additional service shall be provided only as an option (in addition to the base service described above). This optional service is to include all of the same work as described above with the exception of the amount of hazardous waste to be processed.

Option 1: An additional 400-600 lbs. of hazardous waste.

Option 2: An additional 900-1,100 lbs. of hazardous waste.

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 14-Jun-2016 02:00 PM to 05-Jul-2016 02:00 PM.

(End of Summary of Changes)