Questions_and_Answers.docx

DOCX document 12 KB Posted

Attached to
Metal Plate Bending Machine Federal contract opportunity
Solicitation number
N0018918Q0242
Issued by
Department of the Navy Naval Supply Systems Command

View the file

Other files for this federal contract opportunity

Other files attached to Metal Plate Bending Machine, newest first.
File Type Posted
Revised_FAR_and_DFARS_Clauses.docx DOCX document
Questions_and_Answers_2.docx DOCX document
Revised_Requirement_Description.docx DOCX document
Requirement_Description.docx DOCX document
Provisions_and_Clauses.docx DOCX document
Provisions_and_Clauses.docx DOCX document
Requirement_Description.docx DOCX document
Shipping_and_Delivery_Instructions.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Questions and Answers Question 1. What is the maximum width to be rolled?

Answer 1: 8 ft

Question 2. What is the maximum material thickness at full width?

Answer 2: ½ inch

Question 3. What type or American Society of Metals (ASM) grade of material will be rolled?

Answer 3: stainless steel, aluminum, mild steel

Question 4. What is the minimum diameter at the full length, if known?

Answer 4: 7 to 8 inches

Question 5. Is cone rolling required? If so, out of what material? What is the tightest minor end required, if known?

Answer 5: Yes, stainless steel, aluminum, mild steel – 7 to 8 inches, if possible

Question 6. If the minimum diameters are not specifically known, or could vary by job, does the requirement owner anticipate rolling tight diameters? Or large diameters?

Answer 6: tight diameters

File details come from the government source that posted it.