Warhead_Weld_Study_8395090_DRWG.pdf

CAD MAINTAINED. CHANGES

SHALL BE INCORPORATED

BY THE DESIGN ACTIVITY.

A

A

BEST AVG OF OD

THIS SECTION IS DATUM A

( 6.85)

(9.89)

( 6.85)

(28.30)

(10.79)

A

( 6.788)

ALL OTHER CHARACTERISTICS

NONE

1 2011 JUN 3CONFIGURATION CONTROL

2012 FEB 16ECP WH-0022A

1 1 --- NONE

839509053711

OUTER SHELL, WELDED

DEPARTMENT OF THE NAVY

NAVAL SEA SYSTEMS COMMAND

WASHINGTON DC 20362

NAVSEA

REVIEWED

APPROVED

APPROVED

MATERIAL:

�# 2�$

�# .005

�# .01

8420000-18395089

PARTS LIST

FIND

NO

QTY

REQ

CAGE

CODE

PART OR IDENTIFYING

NO

SPECIFICATION NOMENCLATURE OR DESCRIPTION MATERIAL

OR NOTE

1 1 8395091 FORWARD BULKHEAD, OUTER SHELL

2 1 8395092 CENTER BULKHEAD, OUTER SHELL

3 1 8395093 AFT BULKHEAD, OUTER SHELL

4 1 8395094 CONDUIT, OUTER SHELL

5 2 8395095 SHIM, OUTER SHELL

6 1 AS568-224 O-RING, 1.743 X 0.139 VITON

7 AR GE-RTV60 HIGH TEMP, RED SILICONE

8 AR SAE AMS 2526C O-RING GREASE

DISTRIBUTION STATEMENT D - DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY; CRITICAL TECHNOLOGY ( JUNE 2011). OTHER REQUESTS SHALL BE REFERRED TO PEO (SUB) PMS 415.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORTS CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED (TITLE 50, U.S.C., APP 2401, ET SEQ.). VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE PER THE PROVISIONS OF OPNAVINST 5510.161.

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DISTRIBUTION DOCUMENTS, DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

NOTES:

1. INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.100-2004, APPENDICES B THRU E

AND ASME Y14.5M-1994.

2. ELECTRON BEAM WELD PER IH-WP-11EDM2. USE FIND NO. AS WELD JOINT FILLER FOR

BOTH JOINTS. WELD TO DEPTH OF .29/.35 AS SHOWN.

3. GREASE FIND NO. WITH FIND NO. . INSTALL FIND NO. .

4. ADHESIVE BOND IH-AB-11EDM2 USING FIND NO. .

C1 5. LEAK TEST ASSEMBLY TO 30 PSI INTERNAL, 5 MINUTE DWELL TIME PRIOR TO FINAL

MACHINING. ACCEPTANCE CRITERIA: NO VISABLE LEAKING AND/OR REDUCTION IN PRESSURE.

6. PENETRANT INSPECT E-B WELD PER MIL-STD-6866, TYPE I, METHOD A OR D, SENSITIVITY

LEVEL 11. PENETRANT MATERIALS PER MIL-I-25135. ACCEPTANCE - NO CRACKS ALLOWED.

7. ALTERNATE MATERIALS ALLOWED UPON REQUEST.

POST WELD POST WELD

6 8 6

5.

5.

SECTION A-A

.030 A .030 A

ALIGN SCRIBE MARKS �#.010

4.