N0016720Q0266_U0002.pdf

1300867769

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The solicitation is being amended to answ er a vendor question and revise Q4 answ er.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 27-Aug-2020

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0016720Q0266

X 9B. DATED (SEE ITEM 11)

20-Aug-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Aug-2020

CODE

NAVAL SURFACE WARFARE CENTER CARDEROCK

GEORGE DELMORAL

757-513-7194 GEORGE.DELMORAL@NAVY.MIL

904 CORPORATE LANE

CHESAPEAKE VA 23320

N00167 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0016720Q0266

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

QUESTIONS & ANSWERS

QUESTION 1:

For item 0001, it states a 2U workstation, but then under the minimum specifications, it says 2U Display Server, then under Chassis it says 1U or 2U form factor. Also for the Riser Cards, it says 1U. I just want to confirm exactly what size form factor chassis is expected for this opp.

ANSWER: The required form factor is 2U

QUESTION 2:

For item 0001, 10x 2.5” hot swap bays are being requested along with an internal DVD drive. Supermicro does not have a 1U or 2U chassis that can support both. Are 8x hotswap bay drives with support for a DVD drive acceptable?

ANSWER: 8x hotswap bay drives with support for a 2U is acceptable

QUESTION 3:

For item 0003, there is a requirement for 6x 24port SFP+ switches, but the systems for items 0001 and 0002 do not have SFP+ network cards listed on the BOM. Item 0004 does list SFP+ transceivers, but the part number listed

(SFP-10G-SR) is a normal LC to SFP+ transceiver. Do you need dual port SFP+ network cards in all of the servers or do you need a RJ45 to SFP+ transceivers since the servers are being requested with 10Gb RJ45 onboard?

ANSWER: RJ45 to SFP+ transceivers

QUESTION 4:

For item 0004, the BOM lists Two 125v North American power supplies, reversed airflow, but then lists Four fans with port intake. Reversed airflow is back of the switch to the front (port side/intake). I just want to confirm if you need port side exhaust airflow or port side intake airflow.

ANSWER: Port side intake airflow is desired (Revised)

QUESTION 5:

Can we configure the server with SFP+ adapters instead of the 10base-T adapters. 1000base-t ports will still be available in the server.

ANSWER: Yes

(End of Summary of Changes)