Minimum Specs for betaSAM.pdf

Government Minimum Requirements

PR 1300894985; PID N66604-21-SIMACQ-NPT-60-0002

0001: Compute Node Hardware; QTY 12:

All hardware must be delivered by Sept 30, 2021

7x24 Next Business Day Onsite Service, 5 Years

Standard 5-Year Disk Retention

Sliding Tray in front of chassis for easy system identification to include system serial number

Modular, removable and tool less architecture for easy access

Support for embedded NIC (Network Interface Card) to support up to 4x10GbE or 2x25GbE

Quad Port 10Gb Direct Attach/SFP+ Network Adapter- Full line rate must equal 10GbE over each port

Quantity 24 - SFP+ to SFP+ 10GbE Copper Twinax direct attach cables 3 meter

Systems management controller for early notification to prevent server failures and secure access to remote servers

DVD ROM SATA internal

On board FIPS Compliant TPM2.0 (Trusted Platform Module)

Cryptographically signed firmware

Available USB 3.0 port on front of chassis

Minimum 2x USB 3.0 or higher ports on rear of chassis

Minimum 2x VGA port interfaces one on both front and back of chassis

VGA resolution to support including 1920x1200

System must have either a front or rear serial port

Fixed and hot swappable drive support for SAS, SATA or NVMe

Minimum 8GB RAID Controller Card with NV Cache

Compact 2u Form factor with slide rail mounting hardware

Support for Red Hat Enterprise Linux

CPU- Dual Eight Core Intel XEON Gold 6234 3.3GHz 24.75MB Cache 130W

Support for 3 PCI-e Gen3 expansion slot running at 16x

Support for up to 3 single-width GPU accelerators

Include quantity (1) NVIDIA Tesla V100S 32GB, Double Wide, Full Height GPU per system

Support for up to 3 TB 2933MT/s DDR4, ECC memory including mixed memory support for RDIMM, LRDIMM NVDIMM and DCPMM memory modules

Front drive support for up to 8 2.5” hard drives or 8 NVMe drives

Minimum dual redundant power supplies capable of auto sensing and auto switching 1100W or greater

Minimum dual hot-plug redundant fans for system cooling

Quantity 24 - C13/C14 power cords .6 meter

Energy efficient 80% Power Supply or greater

System firmware and drivers must be made available by the vendor via http or https and not solely FTP

BIOS must support the ability to disable power button

Ensure a secure component supply chain from factory to data center

Minimum 1536GB DDR4-2933MT/s ECC RAM (64GBx24)

2 U form Factor

Minimum quantity two 800GB 2.5” Solid State Drive 12Gpbs hot swappable for RAID 1 configuration

0002: Accessories: Rack

42U 600mm Wide x 1200mm deep computer rack enclosure with sides, rear and front door locks

Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment.

Perforated front and rear doors provide ample ventilation for servers and networking equipment.

Front door can be moved to the opposite side or interchanged with rear doors.

Front and read doors must be easily removed.

Side panels that lock

Integrated and adjustable rear channel provides zero U mounting locations for toolless accessories.

Channels bays must support up to four accessories such as PDUs and vertical cable organizers

Leveling feet that can be quickly adjusted when it’s wheels are not in use.

0003: Accessories: Keyboard, Monitor, Mouse; QTY 1

18.5in 1U monitor Rack mount LED integrated keyboard , monitor and mouse (KMM) -TAA Compliant

VGA support & resolution @ 1440x900

Mounting bracket hardware must be included for KMM

3year maintenance on keyboard, monitor and mouse.

0004: Accessories: KVM Switch & Server Interface Modules

16 port Keyboard Video Mouse (KVM) Switch TAA Compliant

Switch must support AES, 3DES, DES and 128-bit SSL encryption

CAC/smart card support

Rack mountable and must include rack mounting hardware

Support for virtual media

Firmware upgradable

LDAP support

Interface seamlessly with Line 003 KMM

Server interface module support for VGA, keyboard, mouse and virtual media for each port

Quantity 16 – Server interface modules TAA Compliant with full support for VGA, USB Keyboard, mouse and virtual media. Server interface modules must be supported by KVM Switch

0005: Power Distribution Unit; QTY 1:

3 Year Warranty minimum

-2 year Warranty on battery

Single phase use only

Energy Star Compliant

Capacity 10.0 KWatts/10kVA 208V UPS

Input connectors: Hardwire 3-wire ( 2PH+ G)

Output connectors: requirement are 6 power NEMA L6-30

LCD graphics display

Serial connectivity

Temperature-compensated battery charging to increase battery life

LED status indicators to also include frequency and current voltage

Network manageable

Automatic internal bypass

Rack mountable 6U footprint

Hot-swappable batteries

Support for additional runtimes by adding battery capacity as necessary

User-replaceable batteries

Automatic self-test

Scalable runtimes

Audible alarms for immediate notification of UPS power conditions

Firmware must be upgradeable

Resettable circuit breaker to localize power overloads

Support for environmental monitoring to include temperature & humidity

Quantity (1) Extended runtime battery pack 192V 3u (should include a 2 year minimum warranty and be able to physically connect to the 10kVa UPS for extended aggregate runtimes)

0006: Metered Power Distribution Unit must include: (PR Item xx) QTY 4

Metered Power Distribution Units (PDU) with LED display, Input connector type 30A National Electrical Manufacturer Association (NEMA) L6-30 connector

Must support both C13 and C19 output connections for equipment

0U form factor

Circuit protection to include circuit breaker

0007: Extended Power Distribution Unit must include: (PR Item xx) QTY 1

Extended runtime battery pack 192V 3u

Include a 2 year minimum warranty

Physically connect to the 10kVa UPS (Line 0005) for extended aggregate runtimes