Minimum Specification Loadbank_Redacted.pdf

MINIMUM SPECIFICATIONS FOR ASCO AVTRON LOADBANK

1.0 INTRODUCTION

The Contractor shall provide the ASCO Power Technologies’ Avtron Series 4500 K675A system to the at NSWC

Carderock .

2.0 BACKGROUND

The EDPE at NSWC Carderock provides research, development, engineering and evaluation support to the U.S. Navy and Marine Corps. The ASCO Series 4500 K675A electronic load is required in order perform duties and support the Mobile Electric Hybrid

Power Sources (MEHPS) acquisition program office.

3.0 OBJECTIVE

The contractor shall provide equipment capable of achieving the requirements listed in

Section 4.0.

4.0 REQUIRMENTS

4.1 AC Electronic load capable of loading the test assets in accordance with MIL-

STD-705C for accurate and consistent generation of data sets.

4.2 Ability to load up to 37.5kVA with a reactive load capability of 22.5kVAR

4.3 Ability to provide up to 30kW of power

4.4 4-wire Three phase 120/208VAC and 240/416VAC

4.5 Offers 60 Hz and 400 Hz

4.6 Offers linear inductive load step per phase power systems.

4.7 Ability to provide the same exact test bed as the previous Avtron Series 4500

K675A load bank in order to double our testing efforts without any differences.

5.0 SHIPPING

5.1 Tracking Information

The contractor shall provide the Government technical point of contact

(TPOC) with tracking information NLT one day after shipping

5.2 Destination

Naval Surface Warfare Center Carderock Division, 9500 MacArthur Blvd, West Bethesda, MD 20817

5.3 Delivery

6.0 GOVERNMENT TECHNICAL POINT OF CONTACT (TPOC)