revised_spec_M67400-16-T-0108_No._2.docx

ITEM NO: 0001 – HEADBOARD, TWIN BUNKABLE, Location: Bedroom, CAT: 1, QTY 392 EA Offered Items Specifications

a) Headboard, with minimum 2 spreaders

b) Wood bed ends with post holes approx. 2” down from the top.

c) Threaded inserts with 20x1-3/8 joining connector bolts and allen heads to attach guard rails

d) Twin Bunkable/Footboard with minimum 2 spreaders

e) Twin Bunkable with Spring Unit

f) Beds bunkable by joining posts of top & bottom headboards and footboards using 3/8x3 pin into each post

g) Max width: 40-42”

h) Bunked height 64” floor to top of stacked post

i) Posts: min: 1Dx2W, max 3x3 and 36H max

j) Twin-size adjustable and stackable

k) Twin bunk assembled: 85L x 42Wx36H

l) Assembled bunk height shall accommodate storage of 18” high, two drawer under bed storage unit

m) Pin edges to be eased, degreased & de-burred

n) Minimum 10- year warranty

a) TWIN Xl, 38”X80”X8”-9” THICK

b) Extra firm

c) Minimum 364 Coils

d) Minimum 13 Gauge spring wire

e) Shall be reversible

f) Minimum ¼” Quilting Foam

g) Minimum 1-1/4” polyester

h) Minimum 5 year warranty

Location: Bedroom, CAT: 1, QTY 392 EA

a) Twin size to fit 38” Wx80”L mattress

b) Double-diamond quilted

c) Fill shall weigh minimum 5.5 oz per lineal yard,

d) Bonded F.R. polyester

e) Base cloth minimum weight: 6oz per linear yard

f) Flammability-inherently flame retardant

g) Must pass NFPA 701 small scale

h) Washable up to 160 degrees Fahrenheit or dry clean

i) Seams shall be safety-lock stitched with Ramaldi or Marrow serge-plus straight stitch

j) Minimum 1 year warranty

Location: Bedroom, CAT: 1, QTY 392 EA

a) Requiring (2) units to be fitted side-by-side in conjunction w/ Item No.0001

b) Approx. 31”Wx24”Dx16”H

c) Two-Drawers per each unit

d) Solid Wood chest

e) Must be stackable

f) Chest shall lock into position without tools.

g) Minimum thickness for Sides, Top, and Toe Kick:

3/4” minimum finished

h) Drawer glides

i) Min. 10-year Warranty

Location: Bedroom, CAT: 1, QTY 392 EA

a) Wall Unit/Computer Desk

b) Double-Doors

c) Appx: 33” Wx24”Dx 75”H

d) End panels, min. thickness: ¾” solid wood

e) Upper storage unit with 3 full-width shelves behind the doors

f) Minimum 2 heavy duty hinges per door

g) Doors shall open at minimum 270 degrees outward

h) 1 solid wood full width pull out tray.Must be accessible when double doors are opened 90 degrees.

i) Handle shall be lockable w/ pad lock

j) Lower Level Storage

Shall contain 3 drawers

k) Minimum thickness for drawers: ¼” solid wood, raised to fully expose the toe kick.

l) Drawers and pull-out tray shall be accessible when double doors are open 90 degrees

m) Unit shall include minimum 2” metal casters/wheels 2 stationary and 2 swivel

-capable of moving unit

-minimum 100lbs weight bearing for each wheel

n) Unit shall have heavy duty roller catches

o) Shall include toe-kick

p) Stainless steel locking system that securely locks both doors flush to unit

q) Minimum 10 year warranty

Location: Bedroom, CAT: 1, QTY 196 EA

a) Approx. 42”Wx24”Dx30”H

b) End panels shall be ¾” thick solid wood

c) 4 drawers total: Three drawers on pedestal

d) One Keyboard drawer

e) Drawers shall have handles

f) Adjustable floor guides

g) Minimum 10 year warranty

Location: Bedroom, CAT: 1, QTY 196 EA

a) Desk Carrel/shelf unit

b) With Corkboard

c) Appx 42”Wx12”Dx24”H

d) Shelf supported by cleats and corner blocks

e) Supported by solid back panel attached to both sides

f) Lighting w/ min. 10’ electrical cord

g) Carrel with fluorescent light attached underneath side of shelf 12”-24” light fixture

h) Basic on/off switch

**refer to “Lamps and Lighting Specs

i) Minimum 10-year warranty

Location: 3rd Deck Lounge, CAT: 1, QTY 1 EA

a) Wall/Unit Entertainment Center

b) Three (3) adjustable shelves

c) Two (2) lower doors on each side

d) Two (2) connecting bridge cabinets w/ (2) doors on each bridge

e) Must fit and support 48” wide TV

f) Cabinet top-sides & shelves shall be ¾” minimum finished thickness

g) Toe kick included

h) Drawer Gliders

i) Back & drawer fronts shall be ¾” minimum finished thickness

j) Doors shall be a minimum of ¼” thick solid wood

-Minimum (2) heavy duty hinges per door

- 270 degree opening for doors

k) Door Cleats shall be approximately ¾” x ¾”

l) Base Corner Blocks shall be solid wood a min. of 1 5/8”Wx5”Dx7’L

m) Adjustable floor glides

n) Surge protectors w/ phone jack on either side of side of unit shelving area.

o) Minimum 10-year warranty

Location: 4th Deck Lounge, CAT: 1, QTY 1 EA

a) Wall/Unit Entertainment Center

b) Three (3) adjustable shelves

c) Two (2) lower doors on each side

d) Two (2) connecting bridge cabinets w/ (2) doors on each bridge

e) Must fit and support 48” wide TV

f) Cabinet top-sides & shelves shall be ¾” minimum finished thickness

g) Toe kick included

h) Drawer Gliders

i) Back & drawer fronts shall be ¾” minimum finished thickness

j) Doors shall be a minimum of ¼” thick solid wood

-Minimum (2) heavy duty hinges per door

- 270 degree opening for doors

k) Door Cleats shall be approximately ¾” x ¾”

l) Base Corner Blocks shall be solid wood a min. of 1 5/8”Wx5”Dx7’L

m) Adjustable floor glides

n) Surge protectors w/ phone jack on either side of side of unit shelving area.

o) Minimum 10-year warranty

Location: 4th Deck Lounge, CAT: 1-4, QTY 2 EA

a) Approximately 72”L x 36”W x 30”H

b) Legs shall be a minimum of 2 ¼” x 2 ¼ square

c) Shall be constructed of solid wood

Location: 3rd Deck Lounge, CAT: 1, QTY 1 EA

a) Approx. 32”Wx32”Lx30”H

b) Card/Chess table top

c) 100 % modular

d) Joints shall be modular and have replaceable expansion joints

e) Shall be lockable, fully assembled design

f) Minimum 10 year warranty

Location: 1st Deck Lounge, CAT: 1, QTY 2 EA

a) Approx. 26”Wx18”Dx20”H

b) Apron shall be secured to the side panels

c) Bottom braces shall be joined to the legs

d) Frame shall be supported w/ four corner blocks

e) Minimum 10 year warranty

Location: 2nd Deck Lounge, CAT: 1, QTY 2 EA

a) Approx. 26”Wx18”Dx20”H

b) Apron shall be secured to the side panels

c) Bottom braces shall be joined to the legs

d) Frame shall be supported w/ four corner blocks

e) Minimum 10 year warranty

Location: 3rd Deck Lounge, CAT: 1, QTY 2 EA

a) Approx. 26”Wx18”Dx20”H

b) Apron shall be secured to the side panels

c) Bottom braces shall be joined to the legs

d) Frame shall be supported w/ four corner blocks

e) Minimum 10 year warranty

Location: 4th Deck Lounge, CAT: 1, QTY 2 EA

a) Approx. 26”Wx18”Dx20”H

b) Apron shall be secured to the side panels

c) Bottom braces shall be joined to the legs

d) Frame shall be supported w/ four corner blocks

e) Minimum 10 year warranty

Location: 1st Deck Lounge, CAT: 1-4, QTY 1 EA

a) Approx. 36”Wx20”Dx16”H

b) Apron shall be secured to the side panels w/ mortise and tenon joints

c) Bottom braces shall be joined to the legs

d) Frame shall be supported w/ four corner blocks

e) Minimum 10 year warranty

Location: 2nd Deck Lounge, CAT: 1-4, QTY 1 EA

a) Approx. 36”Wx20”Dx16”H

b) Apron shall be secured to the side panels w/ mortise and tenon joints

c) Bottom braces shall be joined to the legs

d) Frame shall be supported w/ four corner blocks

e) Minimum 10 year warranty

Location: 3rd Deck Lounge, CAT: 1-4, QTY 1 EA

a) Approx. 36”Wx20”Dx16”H

b) Apron shall be secured to the side panels w/ mortise and tenon joints

c) Bottom braces shall be joined to the legs

d) Frame shall be supported w/ four corner blocks

e) Minimum 10 year warranty

Location: 4th Deck Lounge, CAT: 1-4QTY 1 EA

a) Approx. 36”Wx20”Dx16”H

b) Apron shall be secured to the side panels w/ mortise and tenon joints

c) Bottom braces shall be joined to the legs

d) Frame shall be supported w/ four corner blocks

e) Minimum 10 year warranty

Location: 3rd Deck Lounge, CAT: 1, QTY 4 EA

a) Activity Table Chair

b) Approx. 20”Wx22”Dx31”H

c) Frame shall be constructed of solid wood

d) Back and seat padding shall be minimum of 1 ½” thick

e) Upholstered seat and back with a contour/waterfall design made of contract-grade high-density polyurethane foam

f) Shall be constructed to support the minimum weight of 300lbs

g) Back/seat panel shall be attached to facilitate easy replacement for cleaning and reupholstering.

h) Minimum ten-year

a) Activity Table Chair

b) Approx. 20”Wx20”Dx32”H

c) Back and seat padding shall be minimum of 1 ½” thick

d) Upholstered seat and back with a contour/waterfall design made of contract-grade high-density polyurethane foam

e) Front and rear rails angled so that the chair sits into two positions

f) Minimum ten-year warranty

a) Swivel Bar Stool with Upholstered Seat & back arms

b) Approx. 18”Wx18”Dx32”H

c) Be constructed of solid wood.

d) Minimum ten-year warranty

Location: 1st Deck Lounge, CAT: 1, QTY 2 EA

a) Overstuffed loveseat

b) Approx. 60”Wx33”Dx33”H

c) Fully upholstered

d) Frame solid wood

e) Overstuffed style (no exposed wood)

f) Minimum ten-year warranty

Location: 2nd Deck Lounge, CAT: 1, QTY 2 EA

a) Overstuffed loveseat

b) Approx. 60”Wx33”Dx33”H

c) Fully upholstered

d) Frame solid wood

e) Overstuffed style (no exposed wood)

f) Minimum ten-year warranty

Location: 3rd Deck Lounge, CAT: 1, QTY 1 EA

a) Overstuffed loveseat

b) Approx. 60”Wx33”Dx33”H

c) Fully upholstered

d) Frame solid wood

e) Overstuffed style (no exposed wood)

f) Minimum ten-year warranty

Location: 4th Deck Lounge, CAT: 1, QTY 2 EA

a) Overstuffed loveseat

b) Approx. 60”Wx33”Dx33”H

c) Fully upholstered

d) Frame solid wood

e) Overstuffed style (no exposed wood)

f) Minimum ten-year warranty

Location: 1st Deck Lounge, CAT: 1, QTY 2 EA

a) Three Seat Overstuffed loveseat

b) Approx. 82”Wx33”Dx33”H

c) Fully upholstered

d) Frame solid wood

e) Overstuffed style (no exposed wood)

f) Minimum ten-year warranty

Location: 2nd Deck Lounge, CAT: 1, QTY 2 EA

a) Three Seat Overstuffed loveseat

b) Approx. 82”Wx33”Dx33”H

c) Fully upholstered

d) Frame solid wood

e) Overstuffed style (no exposed wood)

f) Minimum ten-year warranty

Location: 3rd Deck Lounge, CAT: 1, QTY 2 EA

a) Three Seat Overstuffed loveseat

b) Approx. 82”Wx33”Dx33”H

c) Fully upholstered

d) Frame solid wood

e) Overstuffed style (no exposed wood)

f) Minimum ten-year warranty

Location: 4th Deck Lounge, CAT: 1, QTY 2 EA

a) Three Seat Overstuffed loveseat

b) Approx. 82”Wx33”Dx33”H

c) Fully upholstered

d) Frame solid wood

e) Overstuffed style (no exposed wood)

f) Minimum ten-year warranty

Location: Bedroom, CAT: 1, QTY 196 EA

a) Floor Lamp w/ Pleated shade

b) Approx. 60” high

c) Approx. 11” Base

d) Minimum 10lb weight

e) Electrical Cord, Minimum 15 feet

f) Push through on/off socket switch

g) Washable lamp shade

(Similar to 9” top x 18” bottom x 12.5” slant)

h) Shall come w/ energy efficient screw in style light bulb

a) Drape w/ black-out liner; 68” W x 90” L

b) Three –finger

c) Pinched pleated

d) Blackout-lined w/ stiffeners for baton draw

e) Shall be two-way baton-draw

f) Wall or Ceiling mounted as required

g) Shall extend minimum of four inches beyond the window seal and on each side of window

h) Headers shall contain 4” permanent and washable crinoline (buckram)

i) All equal distant pleats shall be bar-tacked

j) Covered weights shall be sewn into each corner and seam to hang wrinkle free

k) Thread shall match the drapery fabric in color, use of monofilament is prohibited

l) Blackout lining sewn a distance from the bottom, under the face material to prevent lining being seen when hung at window

m) Heavy-duty, stainless steel hooks

n) Flammability-inherently flame retardant.

o) Shall pass NFPA 701 small scale

p) Base cloth shall be a minimum weight of 6 oz. per linear yard

q) Blackout lining fabric: three pass fire retardant

r) Drapery shall conform to federal supply schedule 72 section 722-02

s) Hardware for drapes shall be provided.

QTY 3 EA

a) Drape w/ black-out liner; 68” W x 90” L

b) Three –finger

c) Pinched pleated

d) Blackout-lined w/ stiffeners for baton draw

e) Shall be two-way baton-draw

f) Wall or Ceiling mounted as required

g) Shall extend minimum of four inches beyond the window seal and on each side of window

h) Headers shall contain 4” permanent and washable crinoline (buckram)

i) All equal distant pleats shall be bar-tacked

j) Covered weights shall be sewn into each corner and seam to hang wrinkle free

k) Thread shall match the drapery fabric in color, use of monofilament is prohibited

l) Blackout lining sewn a distance from the bottom, under the face material to prevent lining being seen when hung at window

m) Heavy-duty, stainless steel hooks

n) Flammability-inherently flame retardant.

o) Shall pass NFPA 701 small scale

p) Base cloth shall be a minimum weight of 6 oz. per linear yard

q) Blackout lining fabric: three pass fire retardant

r) Drapery shall conform to federal supply schedule 72 section 722-02

s) Hardware for drapes shall be provided.

a) Drape w/ black-out liner; 68” W x 90” L

b) Three –finger

c) Pinched pleated

d) Blackout-lined w/ stiffeners for baton draw

e) Shall be two-way baton-draw

f) Wall or Ceiling mounted as required

g) Shall extend minimum of four inches beyond the window seal and on each side of window

h) Headers shall contain 4” permanent and washable crinoline (buckram)

i) All equal distant pleats shall be bar-tacked

j) Covered weights shall be sewn into each corner and seam to hang wrinkle free

k) Thread shall match the drapery fabric in color, use of monofilament is prohibited

l) Blackout lining sewn a distance from the bottom, under the face material to prevent lining being seen when hung at window

m) Heavy-duty, stainless steel hooks

n) Flammability-inherently flame retardant.

o) Shall pass NFPA 701 small scale

p) Base cloth shall be a minimum weight of 6 oz. per linear yard

q) Blackout lining fabric: three pass fire retardant

r) Drapery shall conform to federal supply schedule 72 section 722-02

s) Hardware for drapes shall be provided.

a) Drape w/ black-out liner; 68” W x 90” L

b) Three –finger

c) Pinched pleated

d) Blackout-lined w/ stiffeners for baton draw

e) Shall be two-way baton-draw

f) Wall or Ceiling mounted as required

g) Shall extend minimum of four inches beyond the window seal and on each side of window

h) Headers shall contain 4” permanent and washable crinoline (buckram)

i) All equal distant pleats shall be bar-tacked

j) Covered weights shall be sewn into each corner and seam to hang wrinkle free

k) Thread shall match the drapery fabric in color, use of monofilament is prohibited

l) Blackout lining sewn a distance from the bottom, under the face material to prevent lining being seen when hung at window

m) Heavy-duty, stainless steel hooks

n) Flammability-inherently flame retardant.

o) Shall pass NFPA 701 small scale

p) Base cloth shall be a minimum weight of 6 oz. per linear yard

q) Blackout lining fabric: three pass fire retardant

r) Drapery shall conform to federal supply schedule 72 section 722-02

s) Hardware for drapes shall be provided.