Amendment 0001 Combine Synopsis-Solicitation M00264-20-R-0011.pdf

M00264-20-R-0011 Amendment 0001

SOLICITATION FOR RANGE TRAINING AND PROGRAMS DIVISION OPERATIONAL SUPPORT

Effective Date: 27 May 2020

Solicitation Number: M00264-20-R-0011 Issue Date: 8 May 2020 Offer Due Date/Local Time 8 June 2020 10:00AM ET

NAICS 541611

Size Standard $16.5M Acquisition is: 100% Total Small Business set-aside

ISSUED BY: Marine Corps Installations National Capital Region – Regional Contracting Office (MCINCR-

RCO)

2010 Henderson Road Quantico, Virginia 22134

CONTRACT SPECIALIST: Mr. Tommy Session CONTRACTING OFFICER: Christa Eggleston-Scott

(703) 432-2316 (703)784-3595 tommy.session@usmc.mil christa.eggleston-sc@usmc.mil

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-06. This acquisition is set aside 100% for Small Businesses. The applicable NAICS code is 541611 – Administrative Management and General Management Consulting Services with a size standard of $16.5M. This Request for Proposal (RFP) and subsequent order are set-aside exclusively for only those authorized Small Businesses.

Proposals from other than these vendors will not be considered. This is a RFP for Range Training and Programs Division Operational Support. The Government intends to award a single firm fixed-price Indefinite Delivery- Indefinite Quantity (IDIQ) contract as a result of this solicitation. This acquisition will be conducted in accordance with Federal Acquisition Regulation (FAR) FAR 12, Acquisition of Commercial Items in conjunction with the policies and procedures for solicitation, evaluation, and award prescribed in FAR Parts 15, Contracting by Negotiation, 16 Types of Contracts, and 19 Small Business Programs.

M00264-20-R-0011 is issued as a RFP to provide the Government the following services: Contractor shall provide non-personal services for the Training and Education Command (TECOM) requirement for contractor support to the Range and Training Programs Division (RTPD) provide the personnel and management necessary to RTPD’s role as requirements and resource sponsor by developing Marine Corps Synthetic Training Environment (MCSTE) capabilities, including Joint Capabilities Integration and Development System (JCIDS) and Department of Defense Architecture Framework (DoDAF) Integrated Architecture products. The Contractor shall support RTPD’s activities in processes such as MCIAP; RTP; Verification, Validation and Accreditation (VV&A); and Planning, Programming, Budgeting, and Execution to provide support to the following tasks: Enterprise Architecture Support, External Information Portal and Website Management, Enterprise-Level Information Technology Engineering/Analysis, Information Systems Security Management, RTPD Support, Conduct Studies and Analysis, Training Capability Assessment Support, Training Processes and Metrics Analysis, Synthetic Environment Development and Support, Training Environment Repository with Remote Accessibility (TERRA) Development and Management Support, and JCIDS Development/Support. These products and activities will guide the development of Marine Corps training aids, devices, simulators and simulations, live ranges and range instrumentation.

Contractor/Offeror: __________________________________ Cage Code: ___________________

__________________________________ DUNS:_______________________

__________________________________ Tax ID #: _____________________

SUBMISSION OF PROPOSALS:

Questions: All questions must be received by 15 May 2020 at 10:00 AM EDT. All questions submitted for this solicitation must be electronically sent to tommy.session@usmc.mil and christa.eggleston-sc@usmc.mil.

Note: Due to the firewall at Quantico, please be advised that it is the Offeror’s responsibility to ensure all electronic submittals of questions are received by the Contracting Officer (KO) in the timeframe given above.

Proposals: Proposals must be received by the Contracting Officer no later than 8 Jun 2020 at 10:00 AM ET.

See FAR 52.212-1 and 52.212-2 Addendums of this solicitation for detailed information regarding submission of proposals.

SCHEDULE OF SUPPLIES/SERVICES

LINE

ITEM

SUPPLY/SERVICE QTY UNIT UNIT

PRICE

TOTAL

PRICE

0001 Enterprise Architecture Support

Provides optional Enterprise Architecture Support services in accordance with PWS Section 3.1.

Period of Performance:

14 September 2020 to 13 March 2021

Firm Fixed-Price

6 Months

0002 Info Portal & Web Mgmt

Provides optional Information Portal and Website Management services in accordance with PWS Section 3.2.

Period of Performance:

14 September 2020 to 13 March 2021

Firm Fixed-Price

6 Months

0003 Enterprise Lvl Info Tech Eng

Provides optional Enterprise Level Technology Engineering/Analysis Support services in accordance with PWS Section 3.3

Period of Performance:

14 September 2020 to 13 March 2021

Firm Fixed-Price

6 Months

0004 RTPD Support

Provides RTPD Support services in accordance with PWS Section 3.4

Period of Performance:

14 September 2020 to 13 March 2021

Firm Fixed-Price

6 Months

0005 Training Capability Eval Support

Provides optional Training Capability Evaluation Support services in accordance with PWS Section 3.5

Period of Performance:

14 September 2020 to 13 March 2021

Firm Fixed-Price

6 Months

0006 Training Processes and Metrics Support

Provides Training Processes and Metrics Support services in accordance with PWS Section 3.6

Period of Performance:

14 September 2020 to 13 March 2021

Firm Fixed-Price

6 Months

0007 JCIDS Development/Support

Provides JCIDS Development/Support services in accordance with PWS Section 3.7

Period of Performance:

14 September 2020 to 13 March 2021

Firm Fixed-Price

6 Months

0008 Travel

Government directed travel in accordance with the attached PWS. The Government estimate for this line item is $25,000. This is a NTE cost reimbursable, non-fee bearing line item. Travel shall be in direct support of tasks within the attached PWS and will be reimbursed only in accordance with FAR Part 31 and only up to the NTE amount identified in this order or as modified by the Government. As stated in FAR 31.2, per diem costs that exceed the rates in the Joint Travel Regulations (JTR) will be found unreasonable. The Government will not reimburse local travel. Local travel is defined as travel within a 50-mile radius of the Government's location.

Period of Performance:

14 September 2020 to 13 March 2021

$25,000.00 $25,000.00

Cost

1001 Enterprise Architecture Support

Provides optional Enterprise Architecture Support services in accordance with PWS Section 3.1.

Period of Performance:

14 March 2021 to 13 March 2022

Firm Fixed-Price

12 Months

1002 Info Portal & Web Mgmt

Provides optional Information Portal and Website Management services in accordance with PWS Section 3.2.

Period of Performance:

14 March 2021 to 13 March 2022

Firm Fixed-Price

12 Months

1003 Enterprise Lvl Info Tech Eng

Provides optional Enterprise Level Technology Engineering/Analysis Support services in accordance with PWS Section 3.3

Period of Performance:

14 March 2021 to 13 March 2022

Firm Fixed-Price

12 Months

1004 RTPD Support

Provides RTPD Support services in accordance with PWS Section 3.4

Period of Performance:

14 March 2021 to 13 March 2022

Firm Fixed-Price

12 Months

1005 Training Capability Eval Support

Provides optional Training Capability Evaluation Support services in accordance with PWS Section 3.5

Period of Performance:

14 March 2021 to 13 March 2022

12 Months

1006 Training Processes and Metrics Support

Provides Training Processes and Metrics Support services in accordance with PWS Section 3.6

Period of Performance:

14 March 2021 to 13 March 2022

Firm Fixed-Price

12 Months

1007 JCIDS Development/Support

Provides JCIDS Development/Support services in accordance with PWS Section 3.7

Period of Performance:

14 March 2021 to 13 March 2022

Firm Fixed-Price

12 Months

1008 Travel

Government directed travel in accordance with the attached PWS. The Government estimate for this line item is $25,000. This is a NTE cost reimbursable, non-fee bearing line item. Travel shall be in direct support of tasks within the attached PWS and will be reimbursed only in accordance with FAR Part 31 and only up to the NTE amount identified in this order or as modified by the Government. As stated in FAR 31.2, per diem costs that exceed the rates in the Joint Travel Regulations (JTR) will be found unreasonable. The Government will not reimburse local travel. Local travel is defined as travel within a 50-mile radius of the Government's location.

Period of Performance:

14 March 2021 to 13 March 2022

Cost

$25,000.00 $25,000.00

2001 Enterprise Architecture Support

Provides optional Enterprise Architecture Support services in accordance with PWS Section 3.1.

Period of Performance:

14 March 2022 to 13 March 2023

Firm Fixed-Price

12 Months

2002 Info Portal & Web Mgmt

Provides optional Information Portal and Website Management services in accordance with PWS Section 3.2.

Period of Performance:

14 March 2022 to 13 March 2023

2003 Enterprise Lvl Info Tech Eng

Provides optional Enterprise Level Technology Engineering/Analysis Support services in accordance with PWS Section 3.3

Period of Performance:

14 March 2022 to 13 March 2023

Firm Fixed-Price

12 Months

2004 RTPD Support

Provides RTPD Support services in accordance with PWS Section 3.4

Period of Performance:

14 March 2022 to 13 March 2023

Firm Fixed-Price

12 Months

2005 Training Capability Eval Support

Provides optional Training Capability Evaluation Support services in accordance with PWS Section 3.5

Period of Performance:

14 March 2022 to 13 March 2023

Firm Fixed-Price

12 Months

2006 Training Processes and Metrics Support

Provides Training Processes and Metrics Support services in accordance with PWS Section 3.6

Period of Performance:

14 March 2022 to 13 March 2023

Firm Fixed-Price

12 Months

2007 JCIDS Development/Support

Provides JCIDS Development/Support services in accordance with PWS Section 3.7

Period of Performance:

14 March 2022 to 13 March 2023

2008 Travel

Government directed travel in accordance with the attached PWS. The Government estimate for this line item is $25,000. This is a NTE cost reimbursable, non-fee bearing line item. Travel shall be in direct support of tasks within the attached PWS and will be reimbursed only in accordance with FAR Part 31 and only up to the NTE amount identified in this order or as modified by the Government. As stated in FAR 31.2, per diem costs that exceed the rates in the Joint Travel Regulations (JTR) will be found unreasonable. The Government will not reimburse local travel. Local travel is defined as travel within a 50-mile radius of the Government's location.

Period of Performance:

14 March 2022 to 13 March 2023

Cost

$25,000.00 $25,000.00

3001 Enterprise Architecture Support

Provides optional Enterprise Architecture Support services in accordance with PWS Section 3.1.

Period of Performance:

14 March 2023 to 13 March 2024

Firm Fixed-Price

12 Months

3002 Info Portal & Web Mgmt

Provides optional Information Portal and Website Management services in accordance with PWS Section 3.2.

Period of Performance:

14 March 2023 to 13 March 2024

Firm Fixed-Price

12 Months

3003 Enterprise Lvl Info Tech Eng

Provides optional Enterprise Level Technology Engineering/Analysis Support services in accordance with PWS Section 3.3

Period of Performance:

14 March 2023 to 13 March 2024

3004 RTPD Support

Provides RTPD Support services in accordance with PWS Section 3.4

Period of Performance:

14 March 2023 to 13 March 2024

Firm Fixed-Price

12 Months

3005 Training Capability Eval Support

Provides optional Training Capability Evaluation Support services in accordance with PWS Section 3.5

Period of Performance:

14 March 2023 to 13 March 2024

Firm Fixed-Price

12 Months

3006 Training Processes and Metrics Support

Provides Training Processes and Metrics Support services in accordance with PWS Section 3.6

Period of Performance:

14 March 2023 to 13 March 2024

Firm Fixed-Price

12 Months

3007 JCIDS Development/Support

Provides JCIDS Development/Support services in accordance with PWS Section 3.7

Period of Performance:

14 March 2023 to 13 March 2024

Firm Fixed-Price

12 Months

3008 Travel

Government directed travel in accordance with the attached PWS. The Government estimate for this line item is $25,000. This is a NTE cost reimbursable, non-fee bearing line item. Travel shall be in direct support of tasks within the attached PWS and will be reimbursed only in accordance with FAR Part 31 and only up to the NTE amount identified in this order or as modified by the Government. As stated in FAR 31.2, per diem costs that exceed the rates in the Joint Travel Regulations (JTR) will be found unreasonable. The Government will not reimburse local travel. Local travel is defined as travel within a 50-mile radius of the Government's location.

Period of Performance:

14 March 2023 to 13 March 2024

$25,000.00 $25,000.00

Cost

SIGNATURE OFFEROR/CONTRACTOR

NAME AND TITLE OF SIGNER DATE SIGNED

PERFORMANCE WORK STATEMENT

Performance Work Statement (PWS) Range and Training Programs Division Operational Support

Vision Statement

To identify the manpower and expertise required to provide seamless Training Support as it applies to exercise design, control and support.

1. Introduction

The objective of this Performance Work Statement (PWS) is greater combat readiness and enhanced operational execution by providing a training continuum that supports planning, preparation, exercise, and assessment capabilities for U.S. Marine units. Training capability requirements describe exercise programs and Modeling and Simulation (M&S) capabilities to meet unit training needs. The Marine Corps Training Environment (MCTE) is a key component in the development of Fleet Marine Forces (FMF) as articulated in the 38th Commandant’s Planning Guidance.

1.1 Mission

The Range Training and Programs Division (RTPD) provides resource sponsorship and requirements oversight of the MCTE throughout the life-cycle of system training aids, devices, simulators and simulations, live ranges and range instrumentation. Training systems must be developed for interoperability across the MCTE, while supporting operational and institutional, home station, exercise, and deployment training venues. RTPD identifies, develops, and coordinates the integration of live and synthetic training systems in order to provide training capabilities to the Total Force.

RTPD/Synthetic Training Integration and Management (STIM) Branch provides resource and requirements sponsorship of the MCTE throughout the life-cycle of system training aids, devices, simulators and simulations.

Achieving Department of Defense Training Transformation requires that training systems be developed for interoperability across the MCTE, while supporting operational and institutional, home station, exercise, and deployment training.

RTPD/Range Training Area Management Branch (RTAMB) RTAMB is responsible for the development and implementation of institutional programs to sustain, upgrade, and modernize Marine Corps training ranges that support the achievement and maintenance of combat readiness. RTAMB is the resource sponsor for institutional range programs and live training systems. RTAM provides for range and training area management through a myriad of functions/programs such as range safety, range maintenance/sustainment, range control management/instruction, Force on Force Training Systems (FOFTS), Immersive Training Environments (ITE) and financial support. Tasked with those responsibilities, RTAM executes requirements as derived from numerous Marine Corps Orders and directives that delineate the responsibilities and requirements for range safety and operations.

1.2 Background

Combat readiness is of the utmost importance to the Marine Corps. The Range and Training Programs Division (RTPD) is responsible to the Commanding General, Training & Education Command (TECOM) for the development of the MCTE. The programs RTPD manages are:

a) Deployed Virtual Training Environment (DVTE), a laptop configuration with additional peripherals which host software that allows users to train in decision making through animated avatars, and virtually view terrain in 3 dimensions. The software application allows users to conduct a variety of scenarios within the Fleet Marine Force in order to increase proficiency of skills associated with their military occupation.

b) Supporting Arms Virtual Trainer (SAVT) supports the qualification of Joint Terminal Air Controller (JTAC) personnel and supports approximately fifty-nine different types of JTAC tasks.

c) Indoor Simulated Marksmanship Trainer (ISMT) is a basic and advanced marksmanship trainer that supports training of small arms and crew-served weapons training.

d) Marine Air Ground Task Force (MAGTF) Tactical Warfare Simulation (MTWS) is a MAGTF staff training system which provides training scenarios where large forces are maneuvered across a constructive representation of the world.

e) Combine Arms Command and Control Training Upgrade System (CACCTUS) is a combined arms training system which supports company and battalion teams in tactics, techniques, procedures, and decision making associated with fire support and maneuver.

f) Marine Corps Driver Trainer (MCDT) supports training associated with MOS skills/licensing and incidental licensing of personnel in the various vehicles employed by the Marine Corps.

g) Combat Convoy Simulator (CCS) supports the training of logistics convoy operations, tactical vehicle maneuver and movement and provides additional training support with dismounting of personnel and weapons engagement training.

h) Combat Vehicle Training System (CVTS) is configured into three separate vehicles: M1A1 Tank, AAV, and LAV, which support crew and gunnery skills training as a gateway to live fire.

I) Family of Egress Trainers (FET) includes the Modular Amphibious Egress Trainer (MAET) which is a modular training device designed to train Marines to egress a ditched aircraft. The trainer and associated training programs are a contractor conducted training program directed toward frequent (non-air crew) flyers and passengers aboard these vehicles. The Family of Egress training is comprised of both Waterborne Egress Training (WET), the Underwater Egress Training (UET) and Dry Rollover Egress Training (DRET). The WET includes the MAET, Submerged Vehicle Egress Trainer (SVET) and Shallow Water Egress Trainer (SWET)

j) Force on Force Training Systems (FoFTS) provide realistic, non-live-fire capabilities to perform force-on-force training and supports realistic, live-fire force-on-target training. The program develops, fields and supports (provides operation, maintenance and warehousing) for a suite of tactical engagement capabilities that enhance MAGTF training around the world and across the ROMO.

k) Instrumented-Tactical Engagement Simulation System Increment II (I-TESS) is a fully integrated system that supports direct force-on-force and force-on-target tactical engagement training. The system provides Command and Control (C2) for real-time situational awareness as well as After Action Review (AAR) capabilities.

l) Combat Vehicle-Tactical Engagement Simulation System (CV-TESS) is mounted on combat vehicles to simulate realistic force-on-force training. System uses lasers, detectors, video and audio on M1A1 tanks, Light Armored Vehicles (LAV) and Amphibious Assault Vehicles (AAV) to simulate battlefield engagements with the vehicle’s primary and secondary weapons as well as provide AAR to enhance gunnery proficiency without expending live ammunition.

m) Immersive Training Range Support (ITRS) supports the overall readiness of the Marine Corps by providing the required immersive environment (current and future) capabilities to support small unit training, from Training and Readiness Standards through Marine Corps Combat Readiness Evaluations

(MCCRE). ITRS capabilities supports units training during pre-deployment requirements and mission essential tasks needed to stay proficient and ready. ITRS uses innovative technologies and programs that enhance the effectiveness of training and education for Fleet Marine Forces (FMF) units.

Future efforts in support of Live Virtual Constructive Training Environment (LVC-TE) shall provide integration of systems such as Aviation Distributed Virtual Training Environment (ADVTE), CACCTUS, DVTE, and SAVT for distributed tactical air-ground training, as well as common tools to support planning, preparation, execution, and assessment.

As the complexity of training events continues to evolve, training program effectiveness and the capabilities of simulation systems to support and optimize training outcomes becomes an increasingly critical concern.

Verification, Validation and Accreditation (VV&A) are three interrelated, but distinct processes that gather and evaluate evidence to determine, based on the model or simulation’s intended use, the capabilities, limitations, and performance relative to the real-world objects it simulates. RTPD tailors VV&A to meet USMC specific requirements and provide a data-based appraisal of simulators and their ability to meet specified training objectives for all supported programs.

1.3 Scope

The Contractor shall provide support to RTPD’s role as requirements and resource sponsor by developing MCTE capabilities, including Joint Capabilities Integration and Development System (JCIDS) and Department of Defense Architecture Framework (DoDAF) Integrated Architecture products. The contractor shall support RTPD’s activities in processes such as Marine Corps Information Assurance Program (MCIAP); Requirements Transition Process;

VV&A; and Planning, Programming, Budgeting, and Execution (PPBE) to provide support to the following tasks: Enterprise Architecture Support, External Information Portal and Website Management, Enterprise Level Information Technology Engineering, RTPD Support, Training Capability Assessment Support, Training Processes and Metrics Analysis, and JCIDS Development/Support. These products and activities guide the development of Marine Corps training aids, devices, simulators and simulations, live ranges and range instrumentation.

2. General Requirements

The Contractor shall conduct and provide documentation on requirements analytics to RTPD by working in concert with subject matter experts in training and education, information management systems, JCIDS, PPBE, defense acquisition, command and control, MAGTF operations, and other relevant disciplines in the development of MCTE documents.

The Contractor shall conduct and provide documentation on the analytical assessments of future development of capabilities such as: Future Integrated Training Environment (FITE), Mixed Reality Training Prototypes, Synthetic Environment Services, Army Synthetic Training Environment (STE), Improved Visual Augmentation System (IVAS), Human Automated Behavior Interoperable Training Services (HABITS), Enterprise Ground Maintenance Training Simulation (EGMTS), Basic Electronic Course Electronics Fundamental Trainer (BECEFT), Leader Focused Decision Games (LFDG) and Fight Club (war gaming), Virtual Reality-Simulator/Battle Lab, Expeditionary JTAC Trainer, Advanced Small Arms Lethality Trainer, Ground Vehicle Training Simulator Infrastructure, solutions for training Littoral Operations in a Contested Environment (LOCE) and Expeditionary Advanced Base Operations (EABO), Contractor Owned, Contractor Operated (COCO) acquisition approaches, Infrastructure as a Service (IaaS),Platform as a Service (PaaS), Software as a Service, and Training as a Service (TaaS). The types of documents include white papers, concepts of operation/employment, capability requirements, letters of clarification, memoranda of agreement/understanding, DoDAF Integrated Architectures, plans, policies, naval messages, formal taskers, information/position papers, briefs, and other supporting documentation.

2.1 Non-Personal Services

The Government shall neither supervise contracted employees nor control the method by which a contractor performs the required tasks. Under no circumstances shall the Government assign tasks to, or prepare work schedules for, individual contracted employees. It shall be the responsibility of the contract lead to manage its employees and to guard against any actions of personal services, or give the perception of personal services. If the contractor believes that any actions constitute, or are perceived to constitute personal services, it shall be the contract lead’s responsibility to notify the Contracting Officer immediately.

2.2 Business Relations

The Contractor shall successfully integrate and coordinate all activity needed to execute the requirement. The Contractor shall manage the timeliness, completeness, and quality of problem identification. The Contractor shall provide corrective action plans, proposal submittals, timely identification of issues, and effective management of subcontractors. The Contractor shall seek to ensure customer satisfaction and professional and ethical behavior of all contractor personnel.

2.3 Contract Administration and Management

The following subsections specify requirements for contract, management, and personnel administration.

2.3.1 Contract Management

The Contractor shall establish clear organizational lines of authority and responsibility to ensure effective management of the resources assigned to the requirement. The Contractor must maintain continuity between the support operations at RTPD and the contractor's corporate offices.

2.3.2 Contract Administration

The Contractor shall establish processes and assign appropriate resources to effectively administer the requirement.

The Contractor shall respond to Government requests for contractual actions in a timely fashion. The Contractor shall have a single point of contact between the Government and Contractor personnel assigned to support contracts or task orders. The Contractor shall assign work effort and maintain proper and accurate time keeping records of personnel assigned to work on the requirement.

2.3.3 Personnel Administration

The Contractor shall provide the following management and support as required. The Contractor shall provide for employees during designated Government non-work days or other periods where Government offices are closed due to weather or security conditions. The Contractor shall maintain the concurrency of their employees by providing initial and refresher training as required to meet the PWS requirements. The Contractor shall make necessary travel arrangements for employees. The Contractor shall provide necessary infrastructure to support contract tasks. The Contractor will ensure the security requirements for the contracted personnel are complete prior to contract award, to include any sub-contracted efforts.

The Contractor shall provide administrative support to employees in a timely fashion (time keeping, leave processing, pay, emergency needs).

2.4 Subcontract Management

The Contractor shall be responsible for any subcontract management necessary to integrate work performed on this requirement and shall be responsible and accountable for subcontractor performance on this requirement. The prime contractor shall manage work distribution to ensure there are no Organizational Conflict of Interest (OCI) considerations. Contractors may add subcontractors to their team after notification to the Contracting Officer or Contracting Officer Representative (COR). Cross teaming may or may not be permitted.

2.5 Contractor Personnel, Disciplines, and Specialties

The Contractor shall accomplish the assigned work by employing and utilizing qualified personnel with appropriate combinations of education, training, and experience. The Contractor shall match personnel skills to the work or task with a minimum of under/over employment of resources. The Contractor shall provide the necessary resources and infrastructure to manage, perform, and administer the contract.

2.6 Location and Hours of Work

All work efforts in support of this PWS will be accomplished primarily at the Contractor’s facilities. However, the Contractor may be required on site at RTPD, 2300A Louis Road, Quantico VA 22134, to support working group meetings and briefings to leadership and sister services. The contractor is responsible for conducting business, between the core hours of 0930 to 1500 daily with a start time of not earlier than 0600 Monday through Friday except US Federal Holidays, inclement weather, and local or national emergencies.

2.7 Travel / Temporary Duty (TDY)

Travel to other government facilities or other contractor facilities may be required as specified in the PWS. All travel requirements (including plans, agenda, itinerary, or dates) shall be pre-approved by the government (subject to local policy procedures), and is on a strictly cost reimbursable basis. Costs for travel shall be billed in accordance with the regulatory implementation of Public Law 99-234 and FAR 31.205-46 Travel Costs (subject to local policy & procedures; may reference FAR).

Table 1: Travel

LOCATION

Duration

(Days) # of

Attendees Base Year # of Trips

Option-1 # of Trips

Option-2 # of Trips

Option-3 # of Trips

MCAS Yuma, AZ 1 week 1 1 1 1 1 MCLB Barstow, CA 1 week 1 1 1 1 1 MCB Camp Pendleton, CA

3 days 1 1 1 1 1

MWTC

Bridgeport, CA

2 days 1 1 1 1 1

MCAGCC

Twenty-nine, Palms, CA

2 days 1 1 1 1 1 MCAS Miramar, CA 2 days 1 1 1 1 1 MCRD San Diego, CA

2 days 1 1 1 1 1 Orlando, FL 2 days 1 1 1 1 1 MCLB Albany, GA 2 days 1 1 1 1 1

MCB Camp Lejeune/MCAS New River, NC

3 days 1 1 1 1 1 MCRD Parris Island/MCAS Beaufort, SC

2 days 1 1 1 1 1 MCB Camp Smith, HI 5 days 1 1 1 1 1 MCBJ Okinawa, JP 4 days 1 1 1 1 1 MCAS Cherry Point, NC 4 days 1 1 1 1 1 AAFB Guam 1 week 2 1 1 1 1

3. Performance Requirements

The following section specifies the Performance Objectives and Performance Elements for the contract.

3.1 Enterprise Architecture Support (Optional)

The Contractor shall provide DoDAF support to RTPD and develop enterprise architectures for the MCTE to include the following:

a) The Contractor shall provide Department of Defense Certified Enterprise Architects (DOD CEA’s).

b) DOD CEAs shall provide accurate linkages, data exchange requirements, workflows, and associated operational and systems engineering information for legacy, updated, and new training systems and training support systems in the RTPD portfolio, including identification of interoperability requirements with other training systems, training support systems, weapon systems, C2 systems, and training readiness systems some of which are managed external to the RTPD portfolio. Develop all mandated and applicable DODAF Viewpoints for systems within the RTPD portfolio and recommend changes to external viewpoints necessary to address interoperability needs of the Marine Corps training community.

c) DOD CEAs shall have access to leverage a variety of outside sources such as the science and technology community, academia, not-for-profit think tanks, industry, other governmental organizations, and nongovernmental organizations to acquire necessary subject matter training expertise in areas of modeling and simulation, concept development, program design, and assessment.

3.2 Information Portal and Website Management (Optional)

The Contractor shall work with RTPD, TECOM G6, and other Government web-hosting service providers to collect user requirements, design content that socializes MCTE capabilities, submit or upload that content to make it accessible to appropriate audiences on TECOM information portals and websites to include:

a) The Contractor shall leverage existing repositories and web servers for website content, permissions, and handle customer requests.

b) The Contractor shall enable and streamline web accessibility of documents and data content via CAC enabled links within the website that support training events, including but not limited to: descriptive capability catalog, training support packages, tutorial videos, simulation scenario files, and simulation terrain datasets.

c) The Contractor shall provide all necessary data files, documentation, and instructions to the Government, or the Government’s agent, to assume management of the information portals and websites upon conclusion of this contract with no downtime during the transition.

3.3 Enterprise Level Information Technology Engineering/Analysis Support (Optional)

The Contractor shall analytically assess future development, integration and federation of current USMC training systems information technology (IT), to include the following:

a) Identify possible IT gaps and recommend proper courses of action (COA) in order to manage resources and mitigate potential risks to the government.

b) Advise on IT policy and guidance at the Federal, DOD, Department, and Service level, to include topics such as cloud services, data strategies, interoperability mandates, acquisition regulations, and the Risk Management Framework (RMF), and coordinate related efforts with the Deputy Commandant for Information (DC I).

c) Provide assessments of implications of proposed IT engineering decisions on training effectiveness and program efficiency

d) Assist RTPD in influencing the science and technology (S&T) process by determining and documenting gaps within programs, identifying which gaps require S&T efforts to resolve, mapping program S&T gaps to enterprise S&T objectives, justifying resource prioritization of S&T solution efforts, estimating the cost to transition S&T efforts into acquisition programs, and providing constructive reviews of S&T transition agreements.

e) Support TECOM’s effort to establish and maintain an enterprise network solution for LVC-TE by validating policy and guidance with DC I representatives, developing network COA assessment frameworks, organizing proof-of-concept efforts with supporting and supported organizations, gathering quantitative and qualitative data on the performance of network COAs, scoring network COAs based on the assessment frameworks, and presenting assessment results to senior and executive leadership. Enable the full establishment, usage, and maintenance of the LVC-TE network by developing enterprise-level plans, providing assessments of plan progress, communicating with involved organizations, and answering questions and requests for support or forwarding them to the appropriate agency.

3.4 RTPD Support

The Contractor shall provide RTPD Support to the division level and branch level staffs of RTPD to include the following:

a) The Contractor shall prepare information papers, documents, scene-setters, white papers, reports to DOD or Congress, email responses, and briefing slides in the appropriate formats as required by TECOM Headquarters, other senior organizations, and as required by the RTPD Director, Deputy Director, RTAM Branch, and STIM Branch personnel. These documents must represent the RTPD position as it applies to the task or strategy, policy, plans, and processes. The Contractor shall refer to agency regulations and other office reference materials as appropriate (e.g., TECOM templates, the Naval Institute Guide to Naval Writing, Publication Manual of the American Psychological Association) to ensure proper format, grammar, content, and spelling. The Contractor shall also provide administration process support, including routing sheet preparation, document staffing, review and adjudication meetings, consultations of references, and coordination assistance.

b) The Contractor shall prepare a variety of correspondence and documents for review that include, but are not limited to: updates to CG TECOM, TECOM routing sheets, meeting invitations, meeting minutes, information papers, analysis reports, briefs, and messages.

3.5 Training Capability Evaluation Support (Optional)

The contractor shall provide analytical support to various aspects of training capability evaluation. Evaluation consists of multiple aspects identified below:

a) The contractor shall support the conduct of the Verification, Validation, and Accreditation (VV&A) process as defined within DoD Instruction 5000.61. The purpose of the VV&A is to ensure development of correct and valid simulations and determine if the simulation is sufficient to meet a need.

b) In coordination with the government sponsor and applicable acquisition Program Manager, the contractor shall support the VV&A process in concert with the Front End Analysis (FEA). The FEA is defined within OPNAVINST 1500.76C as a structured process used to examine Manpower, Personnel, and Training requirements and identify alternative approaches to training tasks. Components of the VV&A process can be conducted separately from the FEA process, but can be mutually supporting if done simultaneously.

c) The contractor shall support the Training Effectiveness Evaluation (TEE), as part of the FEA, to determine the potential value of a training system in enabling students to train identified T&R tasks to standard.

Ideally, the TEE is conducted in concert with Accreditation, although these processes may be completed independent of one another.

3.6 Training Processes and Metrics Support

The Contractor shall provide operations research and operational analysis techniques in the development and documentation of enterprise level processes and training event lifecycle support in order to improve efficiency and effectiveness of training capability development, operations, and sustainment to include:

a) The Contractor shall collect and consolidate training system utilization data.

b) The Contractor shall compile, organize, and analyze empirical evidence to inform resource decisions and research hypotheses about training system utilization and effectiveness with respect to Marine Corps readiness.

c) The Contractor shall maintain related information within a TECOM-provided SharePoint portal.

d) The Contractor shall write and publish quarterly utilization reports.

e) The Contractor shall create Training Event Matrices across identified communities/occupational fields to determine expected utilization rates by unit type, system, and location.

f) The Contractor shall coordinate with policy and standards division (PSD), PMTRASYS, and the Fleet

Marine Force representatives to assist in designing and developing a data model supporting training program evaluation.

g) The Contractor shall deliberately leverage collected data to analytically conduct return on investment

(ROI) analysis to inform resourcing decisions.

h) The Contractor shall assist in designing Training Effectiveness Evaluations (TEEs), via the TEE Plan, that offer empirical evidence related to the applicability, effectiveness, and optimization of current and prototype training capabilities..

i) The Contractor shall participate in key T&R conferences and Training Management Team events to socialize training system capabilities with FMF.

j) The Contractor shall support the implementation of a quantitative skill proficiency scoring model and its associated events and processes.

3.7 JCIDS Development/Support

The Contractor shall provide support to RTPD by working in concert with Subject Matter Experts (SME’s) to develop JCIDS documents and supporting documentation that shall guide the development of Marine Corps live and immersive range training systems and training simulation/simulators to include:

a) The Contractor shall develop draft USMC requirements or JCIDS documents in preparation for their delivery to RTPD, CG TECOM, the Requirements Transition Team (RTT), Deputy Commandant Capability Development Directorate (DC, CDD) or the Marine Requirements Oversight Council (MROC).

b) The Contractor shall, in coordination with RTPD and PM TRASYS, gather information, develop Key Performance Parameters (KPPs), Key System Attributes (KSAs), and Additional Performance Attributes (APAs) based on input from the user community, subject matter experts, portfolio and program or project managers and systems engineers.

c) These draft requirements documents prepared by the contractor will be posted by RTPD Requirements Management on USMC SharePoint tasking systems for staffing review. The contractor will assist in the reconciliation of Action Officer and higher level reviews prior to their submission for final approval.

4. Special Requirements

The Contractor shall possess the necessary credentials (i.e., diploma) to attest to current DoDAF CEA certification through an accredited University; for All Viewpoints (AV), Operation Viewpoints (OV), Capability Viewpoints (CV), Data and Information Viewpoints (DIV), Project Viewpoints (PV), System Viewpoints (SV), and Standard Viewpoints (StdV), and lifecycle system analysis to support future development of training capabilities within the Marine Corps, and potentially with other Services, prior to contract award. DOD CEA certifications must be renewed every three years; transcripts without certification are not acceptable.

The Contractor shall demonstrate expertise as an operations/exercise MAGTF planner at the Marine Expeditionary Force (MEF)/MEB level; and have the ability to translate operational concepts and technical implications of training capability Concepts and CONOPS to DODAF-compliant architecture products. The Contractor shall demonstrate project management, JCIDS requirements and system integration skills, from concept development to capability fielding.

4.1 Security and Safety

This section describes the security and safety for this effort. The following sub-sections provide details of various considerations on this effort.

4.1.1 Security

The Contractor personnel will be required to access information systems such as the MCCEN and data accessed through portals via user accounts and Common Access Cards (CAC). All contract employees will require a CAC to gain access to our system (MCCEN). All employees on a contract are also required to have a visitor request submitted by the contract company in JPAS prior to arrival.

DD Forms 254: (Attachment # 1) Overarching security requirements and Contractor access to classified information shall be as specified in the basic DD Form 254, which shall be further identified in the DD Form 254 for each TO, as required. All contractor personnel with access to unclassified information systems, including e-mail, shall have at a minimum a favorable National Agency Check (NAC).

Visitor Group Security Agreement. The contractor shall sign a Contractor Visitor Group Security Agreement to protect classified information involved in performance under this contract or Task Order. The Agreement outlines responsibilities in the following areas: Contractor security supervision; Standard Practice Procedures; access, accountability, storage, and transmission of classified material; marking requirements; security education; personnel security clearances; reports; security checks; security guidance; emergency protection; protection of government resources; DD Forms 254; periodic security reviews; and other responsibilities, as required.

4.1.2 Safety

Contractor Compliance: The contractor and its subcontractors shall comply with Public Law 91-596 (Occupational Safety and Health Act (OSHA)) and the Environmental, Safety, and Occupational Health (ESOH) (DODD 4715.1E). These requirements shall be incorporated into the contractor's safety and health program. The Department of Defense (DoD) participates in the OSHA Voluntary Protection Program (VPP). Contractor personnel performing services on a DoD installation shall participate in the local VPP. Information on the VPP is available at http://www.osha.gov/dcsp/vpp/index.html.

Mishap Notification and Investigation: The Contractor and its subcontractors (if applicable) shall promptly report pertinent facts regarding mishaps involving Government property damage or injury to Government personnel and to cooperate in any resulting safety investigation. The Contractor shall notify (via telephone) the cognizant contracting officer, the contracting officer's representative, and/or other applicable members within four (4) hours of all mishaps or incidents. The Government person notified by the contractor shall in-turn notify the Safety office. Contractor notifications made after duty hours shall be reported to the appropriate installation Command Post. If requested by the cognizant contracting officer, the contracting officer's representative, and/or the cognizant program manager, the Contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records until released by the investigating safety office. If the Government investigates the mishap, the Contractor and the subcontractors shall cooperate fully and assist the Government personnel until the investigation is completed.

4.2 Transition

The Contractor shall follow the transition plan submitted as part of the proposal and keep the Government fully informed of status throughout the transition period. The contractor shall complete the transition within 30 work days. Throughout the phase-in/phase-out periods, it is essential that attention be given to minimize interruptions or delays to work in progress that would impact the mission. The Contractor must plan for the transfer of work control, delineating the method for processing and assigning tasks during the phase-in/phase-out periods.

4.3 Government Furnished Materials

The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform Range and Training Programs Division Operational Support as defined in this Performance Work Statement except for those items specified as government furnished services. The Government shall provide Standing Operating Procedures (SOPs), Policies and all documentation required to successfully complete the tasks outlined in the PWS.

4.4 Environmental Requirements

The Contractor shall comply with all environmental regulations. However, there are no environmental factors impacting the performance of tasks listed in the PWS.

4.5 Applicable Directives

The Contractor shall comply with all applicable Marine Corps Orders and Directive documents associated with the operation and management of RTPD Programs include, but are not limited to:

a) MCO 1553.1B Marine Corps Training and Education System

b) MCO 1500.53B Marine Air-Ground Task Force Staff Training Program

c) MCO 1553.3B Unit Training Management (UTM) Program

d) MCO 3500.11F Marine Corps Air Ground Task Force Training Program

e) MCO 3501.1D Marine Corps Combat Readiness Evaluation (MCCRE)

f) MCO 3710.6A Marine Corps Aviation Training System

g) MCO 3502.7A Marine Corps Ground Combat Element Operations and Tactics Training Program

h) MCO 3500.109 Marine Corps Aviation Weapons and Tactics Training Program

i) MCO 3502.8 Marine Corps Logistics, Tactics, Training and Education Program

j) MCO 3500.14 W/ADMN CH 28JAN11 Aviation Training & Readiness Program

k) MCO 3502.3B Marine Expeditionary Unit (MEU) and MEU (Special Operations Capable) (SOC) Pre-

Deployment Training Program (PTP)

l) MCO 1553.10 Marine Corps Training Information Management System (MCTIMS) Standing Operating

Procedures (SOP)

m) Defense Acquisition Guidebook, 26 Feb 2017

n) DODI 5000.2E, Implementation and Operation of the Defense Acquisition Systems and the Joint

Capabilities Integration and Development System, 1 Sep 2011

o) CJCSI 3170.01I, Joint Capabilities Integration & Development System, 23 Jan 2015

p) DODD 8100.01, Management of the DOD Information Enterprise (DoD IE) 17 Mar 2016

q) Manual for the Operation of the Joint Capabilities Integration and Development System 31 Aug 2018

r) CJSCI 6212.01G, Interoperability and Supportability of Information Technology and National Security

Systems, 12 Feb 2015

s) MCO 3900.20, Marine Corps Capabilities Based Assessment, 27 Sep 2016

t) SECNAV M-5216.5 Correspondence Manual

u) CJSCI 6212.01G, Net Ready Key Performance Parameter (NR KPP), 12 Feb 2015

v) MCO 3570.1C Range Safety

w) MCO 3550.9_ Marine Corps Range Certification and Recertification program

x) MCO 11000.25 Installation Geospatial Information and Services

y) Safety of Use Memorandums (SOUM)

References can be accessed at Marines.mil

4.6 Quality

This section describes the Quality Control components for this effort. The following sub-sections provide details of various considerations on this effort.

4.6.1 Quality Control

The Contractor shall develop a Task/Delivery Order Quality Control Plan (QCP) and maintain an effective quality control program to ensure services are performed in accordance with the IDIQ contract and this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractor's QCP is the means by which he assures himself that his work complies with the requirement of the contract.

The finalized QCP shall be accepted by the Government at the time of the award of the Task/Delivery Order. The Contracting Officer may notify the Contractor of required modifications to the plan during the period of performance. The Contractor then shall coordinate suggested modifications and obtain acceptance of the plan by the Contracting Officer. Any modifications to the program during the period of performance shall be provided to the Contracting Officer for review no later than 10 working days prior to effective date of the change.

The QCP shall be subject to the Government's review and approval. The Government may find the QCP "unacceptable" whenever the contractor's procedures do not accomplish quality control objective(s). The Contractor shall revise the QCP within 10 working days from receipt of notice that QCP is found "unacceptable."

4.6.2 Quality Assurance Surveillance Plan (QASP)

The Government shall monitor the Contractor's performance under this Task/Delivery Order in accordance with the Government's QASP.

4.6.2.1…