Creston_Salient_Characteristics.pdf

Brand Name or equal to Crestron RMC3 Control System with Touch Panel

Salient Characteristics Memory - SDRAM 1 GB/ Flash 4 GB/ Memory Card supports SD and SDHC cards up to 32 GB External Storage - supports USB mass storage devices up to 1 TB, USB mass storage class devices via USB 2.0 host port, supports computer console via USB 2.0 device port Communications - High-speed Ethernet connectivity Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, Industry-standard Control Subnet 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode RS-232/422/485 For 2-way device control and monitoring, all ports must support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485 IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud Min characteristics for Connectors & Card Slots

(3) control card expansion slots COM 1 – 2 (2) 5-pin 3.5mm detachable terminal blocks;

Bidirectional RS-232/422/485 ports[3];

Up to 115.2k baud; hardware and software handshaking support COM 3 – 6 (4) 3-pin 3.5mm detachable terminal blocks;

Bidirectional RS-232 ports[3];

Up to 115.2k baud; software handshaking support IR - SERIAL OUTPUT 1 – 8 (2) 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports; IR output up to 1.2 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud RELAY OUTPUT 1 – 8 (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC;

MOV arc suppression across contacts LAN (1) 8-wire RJ45 jack;

10Base-T/100Base-TX/1000Base-T Ethernet port[3];

CONTROL SUBNET (1) 8-wire RJ45 jack;

10Base-T/100Base-TX/1000Base-T Ethernet port[3];

Provides a dedicated local network I/O 1 – 8 (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports [3];

Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;

Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads;

Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled;

Programmable 5 Volts, 2k Ohms pull-up resistor per pin NET (1) 4-pin 3.5mm detachable terminal block;

Mmaster port, outputs power to devices[3]; 100-240V~2.4A 50/60Hz (1) IEC 60320 C14 main power inlet;

Mates with removable power cord (1) USB Type B female; USB 2.0 computer console port LCD Display Display Type TFT active matrix color LCD , Min Size 2.8 inch (72 mm) diagonal, Min Resolution 320 x 240 pixels , Functions Displays configuration menus, control port activity, and other system information