KIMBALL (WMSL 418) DD FQ1 DAD 23D0draft.pdf

USCGC KIMBALL (WMSL 756)

SPECIFICATION FOR DRYDOCK REPAIRS

FY2023

Developed By: Daniel A Doherty

(Draft-0, 19 January 2022)

USCGC KIMBALL (WMSL-418) DRYDOCK AVAILABILITY FY2023

ii (Draft-0)

TABLE OF CONTENTS

Revisions Record .......................................................................................................................................... iv

Consolidated List of References..................................................................................................................... v

Consolidated List of Government-furnished Property ............................................................................... xvii

Consolidated List of Critical Inspection Items ........................................................................................... xxv

Principal Characteristics ............................................................................................................................ xxvi

General Requirements

WORK ITEM 1: Hull 3D, Laser Scan

WORK ITEM 2: Hull Plates (Freeboard), Inspect

WORK ITEM 3: Hull Plates (U/W Body), Inspect

WORK ITEM 4: Freeboard, Preserve (Full)

WORK ITEM 5: Freeboard, Preserve (Partial)

WORK ITEM 6: Superstructure, Preserve (Full)

WORK ITEM 7: U/W Body Hull, Preserve (Partial-Condition A)

WORK ITEM 8: U/W Body Hull, Preserve (Full)

WORK ITEM 9: Tenting, Provide

WORK ITEM 10: Tenting (Mast), Provide (Option)

WORK ITEM 11: Propulsion Shaft Fairwaters And Rope Guards, Inspect

WORK ITEM 12: Chain Lockers and Sump, Preserve

WORK ITEM 13: Chain Lockers and Sump, Clean and Inspect

WORK ITEM 14: Voids (Non-Accessible), Preserve

WORK ITEM 15: Voids (Non-Accessible), Leak Test

WORK ITEM 16: Sideport Shell Door, Level 2, Inspect

WORK ITEM 17: Mast, Preserve

WORK ITEM 18: Propulsion Shaft Alignment & Bearings (External) Clearances, Check

WORK ITEM 19: Propulsion Shaft Coverings (MIL-STD-2199B), Inspect and Repair

WORK ITEM 20: Propulsion Shaft Seals (Mechanical), Overhaul

WORK ITEM 21: Controllable Pitch Propeller Hub Assembly, General Maintenance

WORK ITEM 22: Controllable Pitch Propeller System, Perform General Maintenance

WORK ITEM 23: Doppler Speed Log Valve, Overhaul

WORK ITEM 24: Doppler Speed Log, General Maintenance

WORK ITEM 25: Fathometer Transducer (Deep Water), General Maintenance

WORK ITEM 26: Shallow Water Transducer, Renew

WORK ITEM 27: Sea Valves and Waster Pieces, Overhaul Or Renew

WORK ITEM 28: Seawater Strainers (All Sizes), Overhaul and Inspect

WORK ITEM 29: Rudder Stock Bearings, Check Clearances

WORK ITEM 30: Rudder Stock Seals, Overhaul

WORK ITEM 31: Bow Thruster Unit (General), Overhaul

WORK ITEM 32: Anchors Chains and Ground Tackles, Inspect and Preserve

WORK ITEM 33: Stern Ramp, Preserve 100%

WORK ITEM 34: Transom Doors, Inspect And Repair

WORK ITEM 35: Impressed Current Cathodic Protection System Dielectric Shield (Capastic Fairing), Renew

WORK ITEM 36: Impressed Current Cathodic Protection System, Inspect and Maintain

WORK ITEM 37: Cathodic Protection (Zincs), Renew

WORK ITEM 38: Impressed Current Cathodic Protection System Anodes, Renew

WORK ITEM 39: Impressed Current Cathodic Protection System Reference Cells, Renew

WORK ITEM 40: Ship Service Diesel Generator (No. 3) Exhaust Piping, Modify

WORK ITEM 41: Transom Double Doors and Tow Outfits, Modify iii (Draft-0)

WORK ITEM 42: Stern Door Hydraulic and Control System, Modify

WORK ITEM 43: Stern Ramp Rails, Modify

WORK ITEM 44: Cascade Orificial Resistive Device, Clean And Inspect

WORK ITEM 45: Deck Covering (Slip-Resistant) Mast, Preserve

WORK ITEM 46: Drydocking, Accomplish

WORK ITEM 47: Vessel in Drydock Temporary Services, Provide

WORK ITEM 48: Sea Trial Performance, Support, Provide iv (Draft-0)

REVISIONS RECORD

This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE

REV#

WORK

ITEM#

CHANGES MADE

NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated.

v (Draft-0)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

Coast Guard Drawing 418A-WMSL 100-001, Rev -, General Arrangements

Coast Guard Drawing 418A-WMSL 100-006, Rev -, Inboard and Outboard Profiles

Coast Guard Drawing 418A-WMSL 167-001, Rev A, Fabrication & Installation Transom Doors

Coast Guard Drawing 418A-WMSL 169-001, Rev B, Stern Door Extension and Incidental Mods, Extension Panel Construction

Coast Guard Drawing 418A-WMSL 186-001, Rev -, Tow Bitt Structural Reinforcement

Coast Guard Drawing 418A-WMSL 801-001, Rev -, Booklet of General Plans

Coast Guard Drawing 418A-WMSL-100-001, Rev A, General Arrangements

Coast Guard Drawing 418A-WMSL-100-001, Rev A, General Arrangements

Coast Guard Drawing 418A-WMSL-100-006, Rev -, Inboard and Outboard Profiles

Coast Guard Drawing 418A-WMSL-101-005, Rev -, Shell Expansion Scantlings

Coast Guard Drawing 418A-WMSL-114-001, Rev N-A, Fairwaters and Rope Guard Installation Details

& L/M

Coast Guard Drawing 418A-WMSL-167-001, Rev A, Fabrication & Installation Transom Doors

Coast Guard Drawing 418A-WMSL-169-001, Rev D, Stern Door Extension and Incidental Mods

Coast Guard Drawing 418A-WMSL-186-001, Rev -, Tow Bitt Structural Reinforcement

Coast Guard Drawing 418A-WMSL-264-001, Rev A, Rdcn Gr / CPP Gtrb LO Diagram

Coast Guard Drawing 418A-WMSL-264-001, Rev A, Rdcn Gr/ Cpp Gtrb Lo Diagram

Coast Guard Drawing 418A-WMSL-424-001, Rev B, Electronic Navigation Acoustical Cable Block

Diagram

Coast Guard Drawing 418A-WMSL-521-001, Rev -, Diagram Firemain

Coast Guard Drawing 418A-WMSL-521-001, Rev -, Firemain Diagram

Coast Guard Drawing 418A-WMSL-556-001, Rev A, Stern Gate Hydraulic System Diagram

Coast Guard Drawing 418A-WMSL-556-001, Rev A, Stern Gate Hydraulic System Diagram

Coast Guard Drawing 418A-WMSL-571-001, Rev -, FAS Arrangement Installation and Details

Coast Guard Drawing 418A-WMSL-571-003, Rev -, FAS Arrangement Modification

Coast Guard Drawing 418A-WMSL-593-002, Rev B, Sewage System Diagram

Coast Guard Drawing 418A-WMSL-593-104, Rev -, Sewage System Diagram Selected Record Drawing

WMSL 759.

Coast Guard Drawing 418A-WMSL-801-001, Rev -, Booklet of General Plans vi (Draft-0)

Coast Guard Drawing 418A-WMSL-801-001, Rev -, Booklet Of General Plans

Coast Guard Drawing 50-WMSL-424-001, Rev D, Electronic Navigation Acoustical Cable Block

Diagram (ASC424001)

Coast Guard Drawing 750 WMSL-167-001, Rev J, Manhole Installation and Fabrication Details Ship

Wide (ASC167001)

Coast Guard Drawing 750 WMSL-264-002, Rev -, RDCN Gear / CPP and Gas Turbine Lube Oil System

Description (ASC264001-02)

Coast Guard Drawing 750 WMSL-320-025, Rev D, Cathodic Protection System Deck Plan and

Elementary Wiring Diagram (ASC320014)

Coast Guard Drawing 750-WMSL 100-042, Rev H, Unit 3230 Structure - 2nd Dk to Main Deck - Fr 76 to

Fr 88 (ASC100323)

Coast Guard Drawing 750-WMSL 100-044, Rev K, Unit 3320 Struct - Inner Bottom 2nd Deck Fr 89-98

(ASC100332)

Coast Guard Drawing 750-WMSL 100-045, Rev K, 2nd Dk to Main Dk - Fr 82 to Aft (ASC100333)

Coast Guard Drawing 750-WMSL 100-050, Rev K, Unit 4230 Structure - Mast (ASC100423)

Coast Guard Drawing 750-WMSL 100-072, Rev -, Topside Configuration for NSC 5 & Follow

(AS5100004)

Coast Guard Drawing 750-WMSL 556-003, Rev E, Label Plate List - Blst/Deballast-Overfl/Ae/St-Hydr

Sys (ASC556002)

Coast Guard Drawing 750-WMSL 582-001, Rev D, Anchoring, Mooring, and Towing Arrangement

(ASC582001)

Coast Guard Drawing 750-WMSL 582-002, Rev H, Mooring and Towing Arrangement (ASC582002)

Coast Guard Drawing 750-WMSL 583-001, Rev C, Small Boat Handling Arrangements (ASC583001)

Coast Guard Drawing 750-WMSL 583-521, Rev B, Boat Launch & Recovery Ramp Rail Modifications

Coast Guard Drawing 750-WMSL 635-001, Rev -, Thermal & Acoustic Insulation (ASC635001)

Coast Guard Drawing 750-WMSL 635-502, Rev -, Insulation Arr & Details Thermal, Acoustic, & Fire

Coast Guard Drawing 750-WMSL 801-011, Rev -, Booklet of General Plans

Coast Guard Drawing 750-WMSL_100_44, Rev J, Unit 3320 Struct - Inner Bottom 2nd Deck FR 89-98

(ASC100332)

Coast Guard Drawing 750-WMSL_167_5, Rev C, Side Port Door Installation & Details (ASC167005)

Coast Guard Drawing 750-WMSL_582_2, Rev H, Mooring and Towing Arrangement (ASC582002)

Coast Guard Drawing 750-WMSL-085-002, Rev C, Docking Drawing (AS1085007)

Coast Guard Drawing 750-WMSL-085-014, Rev A, Tank Sounding and Moment of Inertia Tables

(WMSL-756 Only) (ASC085014G)

Coast Guard Drawing 750-WMSL-085-016, Rev -, Tank Capacity Curves (ASC085013G) (756)

Coast Guard Drawing 750-WMSL-085-040, Rev -, Docking Drawing (NSC 7 SRD) (ASC085007G)

Coast Guard Drawing 750-WMSL-085-040, Rev C, Docking Drawing (NSC 7 SRD) (ASC085007G)

Coast Guard Drawing 750-WMSL-100-011, Rev H, Unit 1110 Structure - Inner Bottom, 1st Platf, & 2nd

Dk - Bow to Fr 10 (ASC100111)

Coast Guard Drawing 750-WMSL-100-022, Rev K, Unit 2110 Structure - Innerbottom to 1st Platf Fr 35 -

44 (ASC100211)

Coast Guard Drawing 750-WMSL-100-027, Rev K, Unit 2210 Structure - Innerbottom to 1st Platform -

Fr 44 to Fr 52 (ASC100221) vii (Draft-0)

Coast Guard Drawing 750-WMSL-100-032, Rev K, Unit 2310 Structure - Innerbottom to 1st Platform -

Fr 52 to Fr 64 (ASC100231)

Coast Guard Drawing 750-WMSL-100-036, Rev N, Unit 3110 Structure - 1st Platform and Below Fr 65-

77 (ASC100311)

Coast Guard Drawing 750-WMSL-100-040, Rev L, Unit 3210 Structure - Inner Bot to 1st Platform - Fr

76 to Fr 88 (ASC100321)

Coast Guard Drawing 750-WMSL-100-041, Rev G, Unit 3220 Structure 1st Platform to 2nd Deck – Fr 76 to 88 (ASC100322)

Coast Guard Drawing 750-WMSL-100-044, Rev K, Unit 3320 Struct - Inner Bottom 2nd Deck Fr 89-98

(ASC100332)

Coast Guard Drawing 750-WMSL-100-045, Rev J, 2nd Dk to Main Dk - FR 82 to Aft (ASC100333)

Coast Guard Drawing 750-WMSL-100-046, Rev F, Unit 4110 - 01 Level to 02 Level - Fr 28 to Fr 33

(ASC100411)

Coast Guard Drawing 750-WMSL-100-047, Rev G, 02 Level to 03 Level Frame 28 to Frame 33

(ASC100412)

Coast Guard Drawing 750-WMSL-100-048, Rev H, Unit 4210 Structure - 01 Lvl to 02 Lvl - Fr 33 to Fr

44 (ASC100421)

Coast Guard Drawing 750-WMSL-100-049, Rev K, Unit 4220 Structure - 02 Lvl and Above - Fr 33 to Fr

44 (ASC100422)

Coast Guard Drawing 750-WMSL-100-050, Rev K, Unit 4230 Structure - Mast (ASC100423)

Coast Guard Drawing 750-WMSL-100-053, Rev J, Unit 4420 Structure - 01 Level and Abv - Fr 52 to Fr

67 (ASC100442)

Coast Guard Drawing 750-WMSL-100-083, Rev , General Arrangement NSC 5 & Follow (AS5100001)

Coast Guard Drawing 750-WMSL-100-084, Rev -, Topside Configuration for NSC 6 & Follow

(AS6100004)

Coast Guard Drawing 750-WMSL-100-090, Rev -, General Arrangements NSC 7 and Follow On

Coast Guard Drawing 750-WMSL-100-090, Rev A, General Arrangements NSC 7 and Follow

(AS7100001)

Coast Guard Drawing 750-WMSL-100-092, Rev -, Hull Curves of Form (NSC 7 SRD) (ASC100010G)

Coast Guard Drawing 750-WMSL-114-001, Rev B, Fairwaters and Rope Guard Installation Details &

L/M (ASC114001)

Coast Guard Drawing 750-WMSL-114-004, Rev B, Stern Tube Bossing and Shaft Handling Padeyes

(ASC114007)

Coast Guard Drawing 750-WMSL-114-004, Rev B, Stern Tube Bossing and Shaft Handling Padeyes

(ASC114007)

Coast Guard Drawing 750-WMSL-114-005, Rev -, Rudder and Appendages Drawing (NSC 1 SRD)

Coast Guard Drawing 750-WMSL-114-010, Rev -, Rudder and Appendages Drawing (ASC114006F)

Coast Guard Drawing 750-WMSL-114-011, Rev -, Rudder and Appendages Drawing (ASC114006G)

Coast Guard Drawing 750-WMSL-161-001, Rev F, Strut Castings (ASC161001)

Coast Guard Drawing 750-WMSL-161-002, Rev A, Stern Tube & L/M (ASC161002)

Coast Guard Drawing 750-WMSL-167-005, Rev C, Side Port Door Installation & Details (ASC167005)

Coast Guard Drawing 750-WMSL-167-501, Rev N-A, Manhole List, Installation and Fabrication Details, Ship Wide (ASC167001)

Coast Guard Drawing 750-WMSL-169-003, Rev E, Fabrication & Installation of Transom Doors

(ASC169003)

viii (Draft-0)

Coast Guard Drawing 750-WMSL-169-003, Rev E, Fabrication & Installation Transom Doors

(ASC169003)

Coast Guard Drawing 750-WMSL-169-003, Rev E, Fabrication & Installation Transom Doors

Coast Guard Drawing 750-WMSL-191-001, Rev G, Diagram Ballast / Dewatering System (ASC191001)

Coast Guard Drawing 750-WMSL-191-049, Rev -, Diagram Ballast / Dewatering Diagram Selected

Record Dwg NSC 4 (ASC19001D)

Coast Guard Drawing 750-WMSL-191-050, Rev -, Diagram Ballast / Dewatering Diagram Selected

Record Dwg NSC 5 (ASC19001E)

Coast Guard Drawing 750-WMSL-191-051, Rev -, Diagram Ballast / Dewatering Diagram Selected

Record Dwg NSC 6 (ASC19001F)

Coast Guard Drawing 750-WMSL-191-052, Rev -, Diagram Ballast / Dewatering Diagram Selected

Record Dwg NSC 7 (ASC19001G)

Coast Guard Drawing 750-WMSL-191-053, Rev -, Diagram Ballast / Dewatering Diagram Selected

Record Dwg NSC 8 (ASC19001H)

Coast Guard Drawing 750-WMSL-243-007, Rev E, Propulsion Shafting System Arrangement

(ASC243008)

Coast Guard Drawing 750-WMSL-243-008, Rev -, Propulsion Shafting and Appendage (ASC243001B)

Coast Guard Drawing 750-WMSL-243-018, Rev -, Propulsion Shafting and Appendage (NSC 7 SRD)

(ASC243001G)

Coast Guard Drawing 750-WMSL-243-018, Rev -, Propulsion Shafting and Appendage (NSC 7 SRD)

(ASC243001G)

Coast Guard Drawing 750-WMSL-244-001, Rev -, Propulsion Shafting System Measured Bearing

Reaction Report (ASC244001)

Coast Guard Drawing 750-WMSL-244-002, Rev B, Stern Tube Seal & Strut Bearings Arrangement &

Details & L/M (ASC244002)

Coast Guard Drawing 750-WMSL-244-003, Rev -, Propulsion Shafting System Measured Bearing

Reaction Report (AS2244001)

Coast Guard Drawing 750-WMSL-259-020, Rev D, Incin & DG Intake & Combustion Exhaust Sup, Dets

& L/M, 2nd Dk - 02 Lvl (ASC259018)

Coast Guard Drawing 750-WMSL-259-505, Rev C, SSDG #3 Exhaust Modifications

Coast Guard Drawing 750-WMSL-264-500, Rev -, CPP HPU Tanks New Clean Out Access

Coast Guard Drawing 750-WMSL-300-002, Rev C, Electrical Standard Details (ASC300003)

Coast Guard Drawing 750-WMSL-320-010, Rev G, Power Sys Deck Plan-Second DK, AFT OF FR 52

(ASC320006)

Coast Guard Drawing 750-WMSL-320-025, Rev D, Cathodic Protection System Deck Plan and Elem

WD (ASC320014)

Coast Guard Drawing 750-WMSL-320-025, Rev D, Cathodic Protection System Deck Plan and Elem

WD (ASC320014)

Coast Guard Drawing 750-WMSL-320-038, Rev B, Electrical One LINE Diagram (AS1320001)

Coast Guard Drawing 750-WMSL-320-510, Rev U, Electrical One LINE Diagram (ASC320001)

Coast Guard Drawing 750-WMSL-320-511, Rev G, Power Sys Deck Plan-Second DK, AFT OF FR 52

(ASC320006)

Coast Guard Drawing 750-WMSL-320-577, Rev -, Electrical Mods Incidental to Stern Gate PWR &

CNTRL Enhancement ix (Draft-0)

Coast Guard Drawing 750-WMSL-424-001, Rev D, Electronic Navigation Acoustical Cable Block

Diagram (ASC424001)

Coast Guard Drawing 750-WMSL-426-003, Rev B, Speed Log and Depth Finder Transducer Installation and L/M (ASC426003)

Coast Guard Drawing 750-WMSL-426-004, Rev B, Speed Log and Depth Finder Transducer Installation and L/M (ASC426003)

Coast Guard Drawing 750-WMSL-485-001, Rev L, Sleeves-Pipe Structure Penetration (SP485000)

(UNSIGNED)

Coast Guard Drawing 750-WMSL-505-015, Rev E, Miscellaneous Pipe Fabrication

Coast Guard Drawing 750-WMSL-508-001, Rev C, Piping and Machinery Insulation Schedule and L/M

(ASC508001)

Coast Guard Drawing 750-WMSL-520-001, Rev H, Seawater Cooling System Diagram (ASC520001)

Coast Guard Drawing 750-WMSL-520-003, Rev B, Machinery Central Seawater Cooling System

Schematic (ASC520012)

Coast Guard Drawing 750-WMSL-520-027, Rev B, Seawater Cooling System WMSL 756 Only

(ASC520001D)

Coast Guard Drawing 750-WMSL-520-028, Rev -, Seawater Cooling System Diagram WMSL 757 Only

(ASC520001D)

Coast Guard Drawing 750-WMSL-520-505, Rev D, Auxiliary Seawater Piping Mods AMMR & Shaft

Alley

Coast Guard Drawing 750-WMSL-520-506, Rev E, Auxiliary Seawater Piping Mods Fwd of Fr 52

Coast Guard Drawing 750-WMSL-520-507, Rev F, Auxiliary Seawater Piping Mods Aft of Fr 52

Coast Guard Drawing 750-WMSL-521-008, Rev D, Firemain Unit 1220 (ASC521122-FM)

Coast Guard Drawing 750-WMSL-521-014, Rev C, Firemain Unit 2110 (ASC521211-FM)

Coast Guard Drawing 750-WMSL-521-018, Rev E, Firemain Unit 2210 (ASC521221-FM)

Coast Guard Drawing 750-WMSL-521-020, Rev C, Firemain Unit 2230 (ASC521223-FM)

Coast Guard Drawing 750-WMSL-521-022, Rev D, Firemain Unit 2310 (ASC521231-FM)

Coast Guard Drawing 750-WMSL-521-026, Rev D, Firemain Unit 3110 (ASC521311-FM)

Coast Guard Drawing 750-WMSL-521-047, Rev -, Diagram Firemain Selected Record Dwg WMSL 755

Coast Guard Drawing 750-WMSL-521-048, Rev -, Diagram Firemain Selected Record Dwg WMSL 756

Coast Guard Drawing 750-WMSL-521-049, Rev A, Diagram Firemain Selected Record Dwg WMSL 757

Coast Guard Drawing 750-WMSL-521-050, Rev B, Diagram Firemain Selected Record Dwg WMSL 758

Coast Guard Drawing 750-WMSL-521-051, Rev -, Diagram Firemain Selected Record Dwg WMSL 759

Coast Guard Drawing 750-WMSL-528-003, Rev K, Plumbing and Interior Deck Drain Diagram WMSL

756 AF (ASC528003)

Coast Guard Drawing 750-WMSL-529-003, Rev B, Ballast/Dewatering System Schematic (ASC529019)

Coast Guard Drawing 750-WMSL-556-003, Rev E, Label Plate List - Blst/Deballast-Overfl/Ae/St-Hydr

Sys (ASC556002)

Coast Guard Drawing 750-WMSL-556-006, Rev F Stern Gate Hydraulic System Diagram (ASC556004)

Coast Guard Drawing 750-WMSL-556-006, Rev F, Stern Gate Hydraulic System Diagram

Coast Guard Drawing 750-WMSL-556-015, Rev E, Bow Thruster HPU Diagram (ASC556009)

Coast Guard Drawing 750-WMSL-556-016, Rev -, Bow Thruster Hydraulic System Description

(ASC556009-02)

x (Draft-0)

Coast Guard Drawing 750-WMSL-556-22, Rev H, Steering Gear and Stern Gate Hydraulic Piping - Unit

3330 (ASC556333-HY)

Coast Guard Drawing 750-WMSL-556-504, Rev C, Mod To Improve Stern Gate Speed

Coast Guard Drawing 750-WMSL-556-504, Rev C, Mods to Improve Stern Gate Speed

Coast Guard Drawing 750-WMSL-562-001, Rev C, Rudder Bearing Casting (ASC562001)

Coast Guard Drawing 750-WMSL-562-002, Rev C, Rudder (ASC562002)

Coast Guard Drawing 750-WMSL-562-003, Rev D, Rudder Support System (ASC562003)

Coast Guard Drawing 750-WMSL-571-001, Rev D, FAS Arrangement Installation and Details

(ASC571001)

Coast Guard Drawing 750-WMSL-571-500, Rev D, FAS Arrangement Installation and Details

(ASC571001)

Coast Guard Drawing 750-WMSL-581-001, Rev D, Anchor Handling (ASC581001)

Coast Guard Drawing 750-WMSL-581-002, Rev B, Anchor Pocket (ASC581002)

Coast Guard Drawing 750-WMSL-581-003, Rev C, Hawse Pipe and Chain Pipe (ASC581003)

Coast Guard Drawing 750-WMSL-583-002, Rev D, Small Boat Stbd, Hdlg Sys, Arr & Details

(ASC583002)

Coast Guard Drawing 750-WMSL-583-004, Rev H, Stern Launch & Recovery Arrangement & Details

(ASC583004)

Coast Guard Drawing 750-WMSL-583-521, Rev B, Boat Launch and Recovery Ramp Rail

Modifications.

Coast Guard Drawing 750-WMSL-602-001, Rev C, Fab & Instl of Ships Name & Draft Markings

(ASC602001)

Coast Guard Drawing 750-WMSL-631-002, Rev P, Paint Schedule (ASC631002)

Coast Guard Drawing 750-WMSL-633-001, Rev D, Installation of Cathodic Protection System

(ASC633001)

Coast Guard Drawing 750-WMSL-633-500, Rev F, Installation of Cathodic Protection System

(ASC633001)

Coast Guard Drawing 750-WMSL-635-001, Rev -, Thermal & Acoustic Insulation (ASC635001)

Coast Guard Drawing 750-WMSL-635-002, Rev K, Insulation Arr & Details Thermal Acoustic & Fire

Coast Guard Drawing 750-WMSL-801-004, Rev A, Booklet of General Plans NSC 3 SRD

(ASC801001C)

Coast Guard Drawing 750-WMSL-801-011, Rev 1, Booklet of General Plans

Coast Guard Drawing 750-WMSL-801-012, Rev -, Booklet of General Plans (ASC801001G) (SRD)

(NSC7)

Coast Guard Drawing 750-WMSL-801-012, Rev -, Booklet of General Plans (ASC801001G)

Coast Guard Drawing FL-1204-3, Rev A, Fleet Welded Padeyes And Links

Coast Guard Fleet Drawing FL 2804-022, Rev A, Consolidated Visual ID for Cutters (Vessels 65 ft and

Over in Length)

NAVSEA Drawing 803-921865 Rev R, Cathodic Protection System, Hull Zinc Anodes

NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation for Compartments Installation

Details

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors

Manual xi (Draft-0)

Coast Guard Commandant Instruction (COMDTINST) M10360.3 (Series), Coatings and Color Manual

Coast Guard Technical Publication (TP) 7007, SWBS 562, Mar 2021, Rudderstock Seal - Type Er + Is

Coast Guard Technical Publication (TP) 7034, SWBS 243, Dec 2016, Stern Tube Seal – Type M-9 – P/N

US-75888-01 – Installation, Operation & Maintenance Manual

Coast Guard Technical Publication (TP) 7062, SWBS 167, 2021, Sideport Shell Door and Portable

Ladder - Model D-WK-868

Coast Guard Technical Publication (TP) 7062, SWBS 167, Feb 2021, Sideport Shell Door and Portable

Ladder - Model D-WK-868

Coast Guard Technical Publication (TP) 7069, SWBS 562, Jun 2007, Rudder, Lower Bearing

Coast Guard Technical Publication (TP) 7072A, Feb 2016, Controllable Pitch Propeller (CPP) -

Installation Manual

Coast Guard Technical Publication (TP) 7072A, SWBS 245, Feb 2016, Manufacturers Instruction Book, (CPP) Installation Manual

Coast Guard Technical Publication (TP) 7073A, Dec 2020, Reduction Gear - Type as 2/250-As 198F

Coast Guard Technical Publication (TP) 7079, 13-JUN-07, Stern Tube Bearing & Strut Bearings - Model

22022-100/-200

Coast Guard Technical Publication (TP) 7079, SWBS 244, Jan 2018, Stern Tube & Strut Bearings –

Models 22022-100/-200 – Installation, Operation & Maintenance Instructions

Coast Guard Technical Publication (TP) 7127, Oct 2007, SWBS 524, Simplex Basket Strainer – Sizes

3/8" – 8" – Model 72

Coast Guard Technical Publication (TP) 7140, SWBS 633, Jul 2013, Cathodic Protection

Coast Guard Technical Publication (TP) 7153A, Mar 2016, Controllable Pitch Propeller Users Manual

Coast Guard Technical Publication (TP) 7153A, SWBS 245, Mar 2016, Controllable Pitch Propeller

(CPP) Users Manual

Coast Guard Technical Publication (TP) 7158, 21-SEP-07, SRD-500 Dual Axis Doppler Speed Log -

Operation, Service, & Install

Coast Guard Technical Publication (TP) 7160, 21-SEP-07, SRD-500 Dual Axis Doppler Speed Log –

Operation-Operational Manual

Coast Guard Technical Publication (TP) 7202, SWBS 568, Aug 2007, Bow Thruster – Remote Control

System – Plant K161 – Instruction Manual

Coast Guard Technical Publication (TP) 7203, SWBS 568, Aug 2007, Bow Thruster – Model TT1100

DPN CP – Mechanical & Hydraulic System – User Manual

Coast Guard Technical Publication (TP) 7410, Feb 2012, SWBS 593, Duplex Basket Strainer – Sizes 3/4"

– 8" – Model 50

Coast Guard Technical Publication (TP) 7413, Feb 2012, SWBS 593, Duplex Basket Strainer – Sizes 3/4"

– 4” – Model 53BTX

Coast Guard Technical Publication (TP) 7426, SWBS 584, Sep 2021, Sliding Double Transom Door for the NSC 1 and NSC 2.

Coast Guard Technical Publication (TP) 7431, SWBS 568, Feb 2012, Bow Thruster Model TT1100 DPN

CP – Mechanical & Hydraulic System – Installation Manual

Coast Guard Technical Publication (TP) 7498A, SWBS 568, May 2020, Bow Thruster - Electric Motors –

Installation, Operation & Maintenance Manual

Coast Guard Technical Publication (TP) 7525, CIB - Auxiliary Machinery Vol. IV (Hull 750 Only), 2019, SWBS 581 Anchor Storage and Handling xii (Draft-0)

Coast Guard Technical Publication (TP) 7794, 08-OCT-15, Sliding Double Transom Door - Model H-

WK-868-29 (Hulls 752 & ON)

Coast Guard Technical Publication (TP) 7794, Oct 2015, Sliding Double Transom Door - Model H-WK-

868-29 (Hulls 752 & On)

Coast Guard Technical Publication (TP) 7794, SWBS 584, 2021, Sliding Double Transom Door, Model

H-WK-868-29

Coast Guard Technical Publication (TP) 7794, SWBS 584, Sep 2021, Sliding Double Transom Door –

Model H-WK-868-29

Coast Guard Technical Publication (TP) 9532, CIB - Auxiliary Machinery Vol. IV (Hull 755 Only), 2019, SWBS 581 Anchor Storage and Handling

Coast Guard Technical Publication (TP) S9524-AE-MMO-010, SWBS 521, Dec 1986, Cascade Orificial

Resistive Device (CORD)

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General

Requirements

Surface Forces Logistics Center Standard Specification 0450 (SFLC Std Spec 0450), 2020, Electrical

Power for Contractor’s Tools & Equipment

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and

Allied Processes

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2020, Shipboard

Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3401), 2020, Shipboard

Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2020, Shipboard

Electrical Cable Removal, Relocation, Splice, Repair, and Installation

Surface Forces Logistics Center Standard Specification 3100 (SFLC Std Spec 3100), 2020, Inspect, Test and Recondition AC Synchronous Generator in-Place

Surface Forces Logistics Center Standard Specification 3100 (SFLC Std Spec 3100), 2020, Inspect, Test and Recondition AC Synchronous Machines In-Place

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Auxiliary

Machine Systems

Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Auxiliary

Machinery Systems

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2020, Install Interior

Deck Covering Systems

Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8634), 2020, Drydocking

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2020, Temporary

Services

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2020, Temporary

Services.

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8636), 2020, Temporary

Services

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2020, Temporary

Hull Accesses

Tech Pub 7358, VE5900 Echosounder – Technical Handbook xiii (Draft-0)

Tech Pub 7480, VE5900 Echosounder

Tech Pub 7482, Navigation Echosounder – LAZ-5100

OTHER REFERENCES

48 CFR Sec HSAR 3052.217-94 Lay days (USCG)

American Society for Nondestructive Testing (ASNT), Recommended Practice No. SNT-TC-1A, 2016, Personnel Qualification and Certification in Nondestructive Testing

American Society for Nondestructive Testing (ASNT), Recommended Practice No. SNT-TC-1A, 2020, Personnel Qualification and Certification in Nondestructive Testing

American Society for Nondestructive Testing (ASNT), Standard No. ANSI/ASNT CP-189-2016, 2016, ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel

American Society for Nondestructive Testing (ASNT), Standard No. ANSI/ASNT CP-189-2020, 2020, ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel

American Society of Mechanical Engineers (ASME) B16.34, 2020, Valves-Flanged, Threaded, and

Welding End

American Society of Mechanical Engineers (ASME) B16.5, 2017, Pipe Flanges and Flanged Fittings:

NPS 1/2 through NPS 24.

American Welding Society (AWS) B1.10M/ B1.10, 2016, Guide for Nondestructive Examination of

Welds

American Welding Society (AWS) B1.11M/B1.11, 2015, Guide for the Visual Examination of Welds

American Welding Society (AWS) D1.1/D1.1M, 2020, Structural Welding Code – Steel

American Welding Society (AWS) D3.5, 2000, Guide for Steel Hull Welding

American Welding Society, AWS D1.2-96, 1996, Structural Welding Code, Steel

ASNT SNT-TC-1A, 2020, Personnel Qualification and Certification in Nondestructive Testing

ASTM D1730-09, Jan 2014, Standard Practices for Preparation of Aluminum and Aluminum-Alloy

Surfaces for Painting

ASTM International (ASTM) D1330, 2015, Standard Specification for Rubber Sheet Gaskets

ASTM International (ASTM) D1730, 2020, Standard Practices for Preparation of Aluminum and

Aluminum-Alloy Surfaces for Painting

ASTM International (ASTM) D3359, 2017, Standard Test Methods for Measuring Adhesion by Tape

Test

ASTM International (ASTM) D5363, 2016, Standard Specification for Anaerobic Single-Component

Adhesives (AN)

ASTM International (ASTM) F992, 2017, Standard Specification for Valve Label Plates

ASTM Internationals (ASTM) G46, 2018, Standard Guide for Examination and Evaluation of Pitting

Corrosion

CGTTP 4-11.10A-Water Supply and Wastewater Disposal Tactics, Techniques and Procedures (TTP)

Code of Federal Regulations (CFR) Title 29, Part 1910, 2017, Occupational Safety and Health Standards

Code of Federal Regulations (CFR) Title 29, Part 1915, 2013, Occupational Safety and Health Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 29, Part 1915, Subpart E, Sep 2015, Scaffolds, Ladders and

Other Working Surfaces

Code of Federal Regulations (CFR) Title 40, 2013, Protection of the Environment

Commercial Item Description (CID) A-A-59313, Nov 2003, Thread Compound; Anti seize, Zinc Dust-

Petrolatum xiv (Draft-0)

Commercial Item Description (CID) A-A-59875A, 2019, Polysulfide Fairing Compound for Waterborne

Main Propulsion Shafting Coverings on U.S. Naval Surface Ships and Submarines

Commercial Item Descriptions (CID) A-A-59323, Rev A; Cloths, Cleaning, Low-Lint

Federal Specification (Fed Spec) HH-P-151, July 2020, Packing, Rubber-Sheet, Cloth Insert

General Specifications for Overhaul of Surface Ships (GSO), 2004, Section 581 Anchor Stowage and

Handling

International Standard Organization (ISO) 4406, 7/13/2004; Hydraulic Fluid Power -- Fluids -- Method for Coding the Level of Contamination by Solid Particles

International Standard Organization (ISO) 4406, Rev -, 7/13/2004; Hydraulic Fluid Power -- Fluids --

Method for Coding the Level of Contamination by Solid Particles

International Standards Organization (ISO) 4406, 2017, Hydraulic Fluid Power - Fluids - Method for

Coding Level of Contamination by Solid Particles

International Standards Organization (ISO) 4406, 2021, Hydraulic Fluid Power – Fluids – Method for

Coding the Level of Contamination by Solid Particles

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2019 Edition, Pressure Testing Of Steel Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-67, 2017 Edition, Butterfly Valves

Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72A, 2010 Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service

Manufacturers' Standardization Society of the Valve and Fittings Industry (MSS) SP-80, 2003 Edition, Bronze Gate, Globe, Angle and Check Valves

Manufacturers' Standardization Society of the Valve and Fittings Industry (MSS) SP-80, 2019 Edition, Bronze Gate, Globe, Angle and Check Valves

MIL PRF-16173 w/Interim Amendment 2, 2017, Corrosion Prevention Compound, Solvent Cut Back, Cold Application

MIL-A-18001, Aug 2008, Anodes, Sacrificial Zinc Alloy (Commercially Accepted - ASTM B418)

MIL-A-22262B Amendment 2, 2021, Abrasive Blasting Media Ship Hull Blast Cleaning

MIL-C-24633A, 2014, Chain, Stud Link, Anchor, Low Alloy Steel, Flash Butt Welded

MIL-DTL-23549D, 2021, Grease, General Purpose

MIL-DTL-24643, Dec 2011, Cables, Electric, Low Smoke Halogen-Free, For Shipboard Use, General

Specification for

MIL-PRF-1149, Jun 1998, Gasket Materials, Synthetic Rubber, 50 and 65 Durometer Hardness

MIL-PRF-1149E, Nov 2019, Gasket Materials, Synthetic Rubber, 50 and 65 Durometer Hardness

MIL-PRF-17672, 14 Oct 2010, Hydraulic Fluid, Petroleum, Inhibited

MIL-PRF-24176C, 2020, Cement, Epoxy, Metal Repair and Hull Smoothing

MIL-PRF-24176C, Oct 2004, Cement, Epoxy, Metal Repair and Hull Smoothing

MIL-PRF-24647D, 2021, Paint System, Anticorrosive and Antifouling, Ship Hull

MIL-PRF-24667C w/Int. Amendment 1, Mar 2018, Coating System, Non-Skid, for Roll, Spray, or Self-

Adhering Application

MIL-PRF-24667D, Feb 2021, Coating System, Non-Skid, for Roll, Spray, or Self-Adhering Application

MIL-PRF-900, 2020, Rubber Gasket Material, 45 Durometer Hardness

MIL-S-45180, 1998, Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant xv (Draft-0)

MIL-STD-1310, Sept 2009, Shipboard Bonding, Grounding, & Other Techniques for Electromagnetic

Compatibility, Electromagnetic Pulse (EMP) Mitigation, and Safety

MIL-STD-1627, Sep 1994, Bending of Pipe or Tube for Ship Piping Systems

MIL-STD-1689A, 1990, Fabrication, Welding, and Inspection of Ships Structure

MIL-STD-1689A, Nov 1990, Fabrication, Welding, and Inspection of Ships Structure

MIL-STD-2003-3B, Oct 2020, Electric Plant Installation, Standard Methods for Surface Ships &

Submarines (Penetrations)

MIL-STD-2199A, 2010, Coverings for Waterborne Main Propulsion Shafting on U.S. Naval Surface

Ships and Submarines

MIL-STD-2199B, 2020, Covering for Waterborne Main Propulsion Shafting on U.S. Naval Surface Ships and Submarines

MIL-STD-419, Aug 2017, Cleaning and Protecting Piping, Tubing and Fittings for Hydraulic Power

Transmission Equipment

MIL-STD-419, Jul 1987, Cleaning and Protecting Piping, Tubing and Fittings for Hydraulic Power

Transmission Equipment

MSS SP-58, 2018, Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, And Installation

Naval Sea Systems Command (NAVSEA) S9243-AW-TRS-012, Surface Ships Main Propulsion Shafting

Examination, Test and Repair Action Record, Volume 1, Part 2

Naval Sea Systems Command (NAVSEA) T9074-AS-GIB-010/271, 1999, Requirements for

Nondestructive Testing Methods

SAE International (SAE) AMS3824C, 2013, Cloth, Glass Finished for Resin Laminates

SAE International (SAE) AMSC9084, 2013, Cloth, Glass Finished for Resin Laminates

SAE International (SAE) AMS-STD-595A, 2017, Colors Used in Government Procurement

SAE-AMS-G-6032, Grease, Plug Valve, Gasoline and Oil Resistant

SAE-AS8660, Silicone Compound

Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) G-6032A, 2012, Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric

Society of Automotive Engineers (SAE) J1942/1, 2020, Qualified Hoses for Marine Applications

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2004, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2012, Bare Metal Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2013, Power Tool Cleaning to Bare Metal

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2016, Bare Metal Power Tool Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2020, Bare Metal Power Tool Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10 (WAB)/NACE WAB-2, 2015, Near-White Metal Wet Abrasive Blast

Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10 (WAB)/NACE WAB-2, 2015, Near-White Metal Wet Abrasive Blast

Cleaning xvi (Draft-0)

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No. 2, 2007, Near White Metal Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No.2, 2007, Near-White Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 5/NACE No. 1, 2007, White Metal Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 6 (WAB)/NACE WAB-3, 2015, Commercial Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 6 (WAB)/NACE WAB-3, Commercial Wet Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 7 (WAB)/NACE WAB-4, 2015, Brush-Off Wet Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP WJ-4/NACE WJ-4, 2012, Waterjet Cleaning of Metals – Light Cleaning

The Society for Protective Coatings (SSPC)/NACE Joint Surface Preparation Standard SSPC-SP

10/NACE No.2, 2004, Near-White Blast Cleaning

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Jan 2007, Near-White Blast Cleaning

The Society for Protective Coatings SSPC-SP 11, Jul 2012, Power Tool Cleaning to Bare Metal xvii (Draft-0)

CONSOLIDATED LIST OF GOVERNMENT-FURNISHED PROPERTY

The following is a list of property, which the Government will furnish. This list supersedes any other material obligations indicated or implied by referenced drawings.

WORK

ITEM

MTI ITEM DESCRIPTION NSN/PN QTY ESTIMATED

COST

($/UNIT)

4 N Coast Guard Emblem

Vinyl Kit N/A 2 ea. 1,800.00

5 N Coast Guard Emblem

Vinyl Kit

N/A 2 ea. 1,800.00

6 N Coast Guard Emblem

Vinyl Kit

N/A 2 ea. 1,800.00

16 N Gasket 1" x 2-1/8"

Neoprene (25 duro)

Walz and Krenzer 91

Willennbrock Road Unit

B4, Oxford CT, 06478 phone 203-267-5712

NSN: 5330-01-562-8925 PN:

D-WK-868-1-PC7

1 1460.00

16 N Hinge Pin 1-1/4 DIA

316 CRES, Walz and

Krenzer

PN: D-WK-868-5-4 2 188.00

16 N Hinge Washer, Beemer, Oilite Bronze

PN: TT-2006-1 4 7.00

17 N Gasket, EMI/EMP, Conductive Elastomer, Polasheet with

Aluminum, 15 in x 15 in x 1/8 in, Silicone

NSN : 5999-DAO-826037 10 ea. 150.00

17 N Gasket, EMI/EMP, Conductive Elastomer, Polasheet with Monel, 15 in x 15 in x 1/8 in, Silicone

NSN : 5330-DAO-695609 10 ea. 150.00

20 N Major Overhaul Kit NSN: 2840-01-576-0008 PN:

WLP001354-001

2 ea. 85,230.00

21 N Plug (SL231) NSN: 5340-22-624-9161 PN:

F007867

4 75.00

21 N O-Ring (SL231) NSN: 5331-22-624-9162 PN:

F088083

4 5.00

21 N O-Ring (07309) NSN: 5331-01-644-0284 PN:

F088595

10 300.00

21 N Sealing Compound

(R4440)

NSN: 8030-22-621-2495 PN:

F067211

4 60.00

21 N Lubricant NSN: 9150-22-621-2497 PN:

F067665

4 40.00

21 N Grease PN: K192698 1 600.00

21 N Lubricant NSN: 9150-22-621-2498 PN:

F067061

2 200.00 xviii (Draft-0)

21 N Break bolt PN: F000972 10 320.00

21 N Lock pin PN: F000118 80 10.00

26 Y ***Fathometer

Transducer Shallow

Water, 200 kHz

ELAK Nautik LSE 313 1 ea. $750.00

30 Y Seat Assembly, Split NSN: 2040-01-674-3269 PN:

H75378-01-4

2 ea. $20,000.00

30 N Overhaul Kit for

Rudderstock Seal Type

ER+IS, H75378-01

NSN: 2040-01-586-3349 PN:

WLP00142-001

2 ea. $32,000.00

30 N Seal, Chevron Packing

Style, 14.17 in. ID,

15.67 in. OD

PN: Garlock Style 432 2 ea. $500.00

31 N Bow Thruster Overhaul

Kit

NSN: 2090-01-643-4392 PN:

U-1-7-4

1 ea. 17,100.00

34 Y Open-close cylinder, Starboard

NSN: 2040-01-620-6484 1 ea. 22,600.00

34 Y Open-close cylinder, Port NSN: 2090-01-619-7991 1 ea. 22,600.00

34 Y Locking cylinder, Starboard

NSN: 5340-01-620-0721 1 ea. 5,300.00

34 Y Locking cylinder, Port NSN: 5340-01-620-6491 1 ea. 5,300.00

34 N Complete set of door weather seals (OEM Dwg# D-WK-868-40)

PN: Tech Pub 7794, Table 7.1

Item # 6, 12, 13, 14, 15

1 set 2,750.00

34 N Complete set of door guide rails plastic inserts

(UHMW material)

(OEM Dwg# D-WK- 868-42)

PN: Tech Pub 7794, Table 7.1

Item # 24, 25, 26, 27, 28, 29

1 set 15,770.00

34 N Filter Element, Fluid NSN: 4330-01-651-9289 1 ea. 30.00

34 N Locked/Unlocked

Proximity Switch

NSN: 5930-01-603-5420 4 ea. 700.00

34 N Head Proximity Switch NSN: 5930-01-633-2873 2 ea. 745.00

34 N Cap Proximity Switch NSN: 5930-01-633-3026 2 ea. 745.00

38 N Anode Assembly 5342-01-540-3444 /

W3T106665

6 ea. 15228.00

39 N Reference Electrode, Silver & Silver Chloride

(Evoqua Water

Technology)

6160-01-118-4721 /

W3T105304

4 ea. 4,500.00

40 Y 16 Inch IPS, Butterfly

Valve, CRES CL, 150

Flange with stellite, GR

21, Seat Duplex/GPH

Seal and packing Triple, Off set with Gear

Operator by Vanessa Tyco or Equal

CEDG3-V-2 1 ea. $16,360.00 xix (Draft-0)

42 N TUBE, 1 INCH OD X

0,095" WALL,

SEAMLESS, ASTM,

A312 (Piece 13 of Coast

Guard Drawing 750-

WMSL-556-504)**

10 Feet $250.00

42 N Integrated Motor Pump, 460 Volt AC, 60 HP

Motor (Piece 15 of

Coast Guard Drawing

750-WMSL-556-504)

Vickers MP45-B1-R-V8118N-

A-F1-20-S**

1 ea. 14,588.00

42 N DIRECT -ACTING

RELIEF VALVE -

PILOT CAPACITY, 2,5

GPM CAPACITY, T-8

CAVITY, 1000 PSI

SET POINT(Piece 49 of

Coast Guard Drawing

750-WMSL-556-504)

SUN HYDRAULICS

RBAECAN

1 $500.00

42 N LINE MOUNT

MANIFOLD SIZE -06

(9/16" -18 UN/UNF-2B)

SAE - ORB FEMALE

PORTS, 90 DEGREE

FLOW PATH, T-8A

CAVITY (Piece 50 of

Coast Guard Drawing

750-WMSL-556-504)

SUN HYDRAULICS WFO 2 $250.00

42 N ROTARY FLOW

DIVIDER, EXTERNAL

GEAR, 1 ¼â€□

FEMALE SAE ORB

INLET X 2 EACH 1:

FEMALE SAL ORB

OUTLETS, NO

RELIEF VALVE, 50

GPM MAX INLET

FLOW (Piece 57 of

Coast guard Drawing

750-WMSL-556-504)**

VIKING ROTARY FLOW

DIVIDER GD-07DD00-GO

1 $500.00

42 N PILOT-OPERATED,

BALANCED PISTON

RELIEF VALVE

CARTRIDGE, 50 GPM

CAPACITY, T-3A

CAVITY, 1000 PSI

SET PONT (Piece 58 of

Coast Guard Drawing

SUN-HYDRAULICS RPGC-

LAN

2 $250.00 xx (Draft-0)

750-WMSL-556-504)

42 N LINE MOUNT

MANIFOLD,

THROUGH PORT

WINI GAUGE PORT,

SIZE -16 (1 5/16"-12

UN/UF-2B) FEMALE

SAE-ORB UNE

PORTS,SIZE -04

(7/16"-20 UN/UNF-2B)

FEMALE SAE-ORB

GAGE PORT, T-3A

CAVITY (Piece 59 of

Coast Guard Drawing

750-WMSL-556-504)

SUN HYDRAULIC VFW 2 $500.00

42 N DO8 STANDARD

FLOW PARALLEL

MANIFOLD, 4

STATIONS, SAE-ORB

PORTS, WITH "X"

PORT OPTION AND

SUN CAVITY T-3A

FOR RELIEF VALVE

CARTRIDGE (Piece 67 of Coast Guard Drawing

750-WMSL-556-504)

DAMAN DD8P0455/1S 1 $750.00

42 N ADJUSTABLE

NEEDLE VALVE

CARTRIDGE, 140

GPM CAPACITY, T-

18A CAVITY (Piece 68 of Coast Guard Drawing

750-WMSL-556-504)

SUN HYDRAULIC NFFDLIN 3 $75.00

42 N SANDWICH

MANIFOLD, ISO 08,

T-18-A CAVITY ON P

(Piece 69 of Coast

Guard Drawing 750-

WMSL-556-504) **

SUN HYDRAULIC IBO 3 $500.00

42 N FAST-ACTING,

PILOT-OPERATED,

BALANCED PISTON

RELIEF VANE

CARTRIDGE, 50 GPM

CAPACITY, T-3A

CAVITY, 1100 PSI

SET POINT (Piece 70

SUN HYDRAULIC

RPGELAN

1 $500.00 xxi (Draft-0) of Coast Guard Drawing

42 N DIRECTIONAL

CONTROL VALVE,

DOUBLE SOLENOID,

3 POSITION , SPRING

CENTERED, EXT

PLOT, INTERNAL

DRAIN, 120 VAC/60

HZ, MANUAL

OVERIDE ,

MANAPLUG (MIN)

WITH LIGHTS (Piece

71 of Coast Guard

Drawing 750-WMSL-

556-504) **

PARKER

D61VW00C5NYGP56

3 $350.00

42 N DIRECTIONAL

CONTROL VALVE,

SINGLE SOLENOID, 2

POSITION, SPRING

CENTERED, EXT

PLOT, MEDIAL

DRAIN, 120 VAC/60

HZ, MANUAL

OVERIDE,

MANAPLUG (MINI)

WITH LIGHTS (Piece

72 of Coast Guard

Drawing 750-WMSL-

556-504) **

PARKER

D81VW002E5NYGP56

1 $500.00

42 N PILOT-TO-OPEN

CHECK VALVE WITH

STANDARD

PILOTCARTRIDGE,

60 GPM CAPACITY,

T-17-A CAVITY (Piece

73 of Coast Guard

Drawing 750-WMSL-

556-504) **

SUN HYDRAULIC

CKGBXCN

2 $250.00

42 N SANDWICH

MANFOLD• ISO 08, ON A AND B W1TH

CROSS PILOT, T-17-6

CAVITY (Piece 74 of

Coast Guard Drawing

750-WMSL-556-504)

SUN HYDRAULIC HBN/S 2 $500.00

42 N PLUG, HEX HEAD,

SIZE -16 (1 5/16"-12

UN/UNF-2A) MALE

PARKER 16 PSON 5 $25.00

xxii (Draft-0)

SAE-ORB (Piece 75 of

Coast Guard Drawing

42 N PLUG, HEX HEAD,

SIZE -20 (1 5/8"-12

UN/UNF-2A) VALE

SAE-ORB ORB (Piece

76 of Coast Guard

Drawing 750-WMSL- 556-504) **

PARKER 20 PSON 1 $25.00

42 N UNION, 1/2" IPS

FEMALE SOCKET

WELD X SIZE -08

(3/4,-16 UN/UNF-2A)

MALE SAE-ORB

(Piece 77 of Coast

Guard Drawing 750-

WMSL-556-504) **

DERBYSHIRE MARINE

MP303-3-8

8 $20.00

42 N UNION, 1" PS

FEMALE SOCKET

WELD X WE -16 (1

5/16"-12 UN/UNF-2A)

MALE SAE-ORB

(Piece 85 of Coast

Guard Drawing 750-

WMSL-556-504) **

DERBYSHIRE MARINE

MP303-5-16

15 $10.00

42 N LINE MOUNT

MANIFOLD , CROSS

PILOT, 1" SAE ORB

LNE PORTS, T-17A

CAVITIES, 2

CAVITIES (Piece 89 of

Coast Guard Drawing

750-WMSL-556-504)

SUN HYDRAULIC YJM 2 $250.00

42 N 3,1 PILOT RATIO, ,

STANDARD

CAPACITY

COUNTERBALANCE

VALVE, 60 GPM

CAPACITY, T-17A

CAVITY, 1000 PSI

RELIEF SET PONT

(Piece 90 of Coast

Guard Drawing 750-

WMSL-556-504) **

SUN HYDRAULIC

CGGALHN

4 $100.00

42 N DIRECT-ACTING

RELIEF VALVE -

PILOT CAPACITY, 2,5

GPM CAPACITY, T-84

SUN HYDRAULIC

RBAECEN

1 $250.00 xxiii (Draft-0)

CAVITY, 200 PSI SET

POINT (Piece 103 of

Coast Guard Drawing

42 N Topworx 7FA6-73658-3DD 4 605.00

42 N Topworx 7FD1-73658-3DD 2 619.00

42 N Topworx 7FG7-73658-3DD 2 633.00

42 N Topworx 3PIN IMPLLSE, 2 ft Cable 8 150.00

42 N Port Open-Close

Cylinder OEM Dwg D-

WK-868-32 (Item 4)

NSN: 2090-01-619-7991 1 34,303.02

42 N Stbd Open-Close

Cylinder OEM Dwg D-

WK-868-32 (Item 5)

NSN: 2090-01-620-6484 1 32,870.03

42 N Port Locking Cylinder

OEM Dwg D-WK-868-

44 (Item 33)

NSN: 5340-01-620-6491 1 8,566.00

42 N Stbd Locking Cylinder

OEM Dwg D-WK-868-

44 (Item 37)

NSN: 2090-01-619-0721 1

42 N Center Gasket OEM

Dwg# D-WK-868-40 (Item 06)

NSN: 5330-01-649-2524 1 390.13

42 N Port Upper Gasket OEM

Dwg# D-WK-868-40 (Item 12)

42 N Port Lower Gasket

OEM Dwg# D-WK- 868-40 (Item 13)

NSN: 5330-01-649-2507 1 390.13

42 N Stbd Upper Gasket

OEM Dwg# D-WK-

868-40 (Item 14)

NSN: 5330-01-649-7389 1 390.13

42 N Stbd Lower Gasket

OEM Dwg# D-WK-

868-40 (Item 15)

NSN: 5330-01-649-7391 1 390.13

42 N Port Lower Guide Rail

OEM Dwg# D-WK-

868-42 (Item 24)

NSN: 5340-01-649-7443 1 2,950.00

42 N Port Middle Guide Rail

OEM Dwg# D-WK-

868-42 (Item 25)

NSN: 5340-01-649-7452 1 2,950.00

42 N Port Upper Guide Rail

OEM Dwg# D-WK-

868-42 (Item 26)

NSN: 5340-01-649-7462 1 2,950.00

42 N Stbd Lower Guide Rail

OEM Dwg# D-WK-

868-42 (Item 27)

NSN: 5340-01-649-7470 1 2,450.00

42 N Stbd Middle Guide Rail

OEM Dwg# D-WK-

NSN: 5340-01-650-1580 1 2.450.00

xxiv (Draft-0)

868-42 (Item 28)

42 N Stbd Upper Guide Rail

OEM Dwg# D-WK-

868-42 (Item 29)

NSN: 5340-01-650-1575 1 2,450.00

42 N JUMO Thermometer 608540/0280-643-00-0-847-8- 144-26-150-21/5220 Scale C+F

1 452.42

*Government-loaned property, which shall be returned to the vessel upon completion of the availability.

**New or refurbished equipment that the Government may provide for installation in place of existing equipment.

***Government-furnished property, which is to be supplied by either the vessel or the C4IT ServiceCenter xxv (Draft-0)

CONSOLIDATED LIST OF CRITICAL INSPECTION ITEMS

The following is a list of work items, which contain Critical Inspection reports, which the Contractor must complete within the first 25% of the availability contract period (see SFLC Std Spec 0000, paragraph 3.2.6.5

(Inspection report particulars)):

Work

Item Title

2 Hull Plates (Freeboard), Inspect

3 Hull Plates (U/W Body), Inspect

4 Freeboard, Preserve (Full)

6 Superstructure, Preserve (Full)

8 U/W Body Hull, Preserve (Full)

13 Chain Lockers and Sump, Clean and Inspect

15 Voids (Non-Accessible), Leak Test

18 Propulsion Shaft Alignment & Bearings (External) Clearances, Check

19 Propulsion Shaft Coverings (MIL-STD-2199B), Inspect and Repair

20 Propulsion Shaft Seals (Mechanical), Overhaul

21 Controllable Pitch Propeller Hub Assembly, General Maintenance

27 Sea Valves and Waster Pieces, Overhaul Or Renew

29 Rudder Stock Bearings, Check Clearances

30 Rudder Stock Seals, Overhaul

Bow Thruster Unit (General), OverhaulNeed to ensure repairs to correct bow thruster incorporated

36 Impressed Current Cathodic Protection System, Inspect and Maintain

37 Cathodic Protection (Zincs), Renew

41 Transom Double Doors and Tow Outfits, Modify

42 Stern Door Hydraulic and Control System, Modify xxvi (Draft-0)

PRINCIPAL CHARACTERISTICS

418' WMSL

PHYSICAL

Length overall 418' 0"

Length between perpendiculars 390' 0"

Maximum beam 54' 0"

Beam @ 01 level 47' 9-1/8"

Depth (01 level @ side to baseline) 39' 2-3/4"

01 deck camber foredeck 1/4" in 1'-0"

Minimum berth depth 20' 0"

Height of highest projection Approximately 119'

Draft, design 14.40'

Design displacement 3925 long tons

MACHINERY

Two diesel engines MTU 20V, 20-cylinder 9,730 SHP each

One gas turbine General Electric LM2500; 29,500 SHP

Type of propulsion CODAG

Electrical system 24 Volt DC

Two controllable pitch propellers Rolls-Royce 5 blade, 14' 0" diameter; 229 RPM max

Two reduction gears RENK

One cross connect gear RENK

HULL

Hull material 5086 Aluminum

HSLA-80 Steel

ABS EH 36 Steel

ABS AH 36

Frame spacing

FWD of FR 9 2' 3"

FR 9 to FR 10 6' 9"

FR 10 to FR 98 4' 1"

FR 98 to FR 99 3'-8"

ELECTRICAL

Power Three 1360 kW, 450 V, 60 Hz, 3 Phase, 1800 RPM Caterpillar 3512B diesel engines with Baylor ship service generators

Shore tie cable Seven MIL-C-24368/2 (NATO) shore power receptacles, 400 A each

TANK CAPACITIES

Diesel oil 220,359 gal

Fresh water 12,454 gal

JP-5 Fuel 35,182 gal

1 (Draft-0)

00000_0821_FLT

REC_00000_FLT_Commercial Project @ Contractor’ Facility (0121)

General Requirements

1. SCOPE

1.1 Intent. This standard specification invokes general requirements for conducting vessel repairs performed at a commercial contractor’s facility for Coast Guard vessels.

1.2 Term interchangeability. The terms 'Contractor', 'CG Yard', 'NAVSTA EVERETT', 'shipyard', 'Base', and

'Coast Guard Industrial' are used interchangeably in this specification. Where the primary service provider is

Coast Guard personnel, references to contractor and other noted descriptors within this specification or within drawings, publications, SFLC Standard Specifications or other commercial and military references are deemed the same as prime service provider.

2. REFERENCES

None

Coast Guard Commandant Instruction (COMDTINST) M10360.3 (series), Coatings and Color Manual

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General

Requirements

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and

Allied Processes

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures

None

3. REQUIREMENTS

3.1 General. The Contractor must conform to all requirements specified in SFLC Std Spec 0000 and in this item, as applicable, during the performance of this availability.