J1a. TMB - Addendum #1 - 031721.pdf

Date: 3-17-2021

PROJECT: TMB ATCT REHABILITATION PROJECT

Solicitation No: 697DCK-21-R-00096

SUBJECT: ADDENDUM #1

Additional items and clarifications to be included into the above project:

No REFERENCE List of Items to be added to contract 1 Specifications Replace “shall” with “must” in all instances throughout document.

2 Specifications

Section 01 00 00 page 2 item 1.3 A.

Replace “Executive Order 13423 - Strengthening Federal Environmental, Energy, and Transportation Management” with “Executive Order 13693, Planning for Federal Sustainability in the Next Decade”.

Specifications Section 01 10 00 page 5 item 1.9

Delete item 1.9 TYPE OF CONTRACT.

4 Specifications Section 01 10 00 page 5 item 1.20

Delete item 1.20 INSURANCE.

5 Specifications Section 22 54 58

The following statement shall apply to brand name or equal references in this Section:

“Each product required for use must meet the actual minimum needs of the Government as demonstrated in the salient (prominent, important) characteristics for that product. If a brand name product is used in the drawings or specifications, it should be regarded as a "known acceptable source" (i.e., a product that meets the actual minimum needs, and demonstrates the appropriate salient characteristics). When the drawings or specifications contain references to brand name products and specified manufacturers, the FAA will accept, with approval, a substitution so long as the proposed substitution meets the performance characteristics required for the specified application. The product used can be identical or equal to the brand name product or known acceptable source in meeting the salient characteristics, but it need not exceed the actual minimum requirements. Any brand name product or known acceptable source mentioned will, however, not be required for use in order to comply with the specifications or drawing unless those documents make it clear that the brand name product is required, and substitution is prohibited.”