Item Description for B-52 Bomb Bay Stands.pdf
PDF 122 KB Posted
- Attached to
- B-52 Bomb Bay Stands Federal contract opportunity
- Solicitation number
- FA812524Q0027
About this file
This document is an Item Description that outlines the requirements for fabricating a prototype B-52 Bomb Bay Stand for the Department of the Air Force Materiel Command Air Force Sustainment Center.
The key details include the requirement to fabricate one (1) B-52 Bomb Bay Stand prototype to ensure proper fit in the Bomb Bay area, conduct Non-destructive Inspection (NDI) on all welds, and verify the load ratings through finite element analysis (FEA) performed by a certified engineer. Once the prototype is tested and approved, the stands will be painted with OSHA Safety 13591 YELLOW or equivalent, and a Safety Data Sheet (SDS) will be provided. The prototype will be built at the manufacturer's facility, disassembled, shipped, and re-assembled at Tinker AFB, Building 2121.
The related Federal Contract Opportunity is Solicitation Number FA812524Q0027 for B-52 Bomb Bay Stands. Contractors must have an active 2345 through the JCP Portal to receive the technical drawings and specifications.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment FA812524Q00270002 SF 30.pdf | ||
| Solicitation Amendment FA812524Q00270001 SF 30.pdf | ||
| A24-010 Bomb Bay Stands SOW Revision 1.pdf | ||
| A24-010 Item Description Revision 1.pdf | ||
| Statement of Work for B-52 Bomb Bay Stands.pdf | ||
| Solicitation - FA812524Q0027.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
1 March 2024
MEMORANDUM FOR RECORD
SUBJECT: Item Description, A24-010 - B-52 Bomb Bay Stand
The 76 AMXG is requesting utilization of funds for the purchase of B-52 Bomb Bay Stand.
2. The requested equipment item descriptions/specifications are outlined below.
• Fabrication of ONE (1) B-52 Bomb Bay Stand prototype built to fit the Bomb Bay area and ensure no further design changes are needed. Once fitting test has been confirmed, this will be followed by a Non-destructive Inspect (NDI) on all welds for crack. Once the inspection is complete a written report will be provided to the
SME.
• The prototype will be built at manufacture’s facility, disassembled, shipped, and re-assembled at Tinker AFB, building 2121.
• All Stands will be painted with OSHA Safety 13591 YELLOW or Equivalent IAW FED STD 595C and a Safety Data Sheet (SDS) will be provided to the SME at time of final acceptance.
• Contractor must also verify load ratings through finite element analysis (FEA) performed by certified engineer and provide documentation.
File details come from the government source that posted it. Updated .