A24-010 Item Description Revision 1.pdf
PDF 230 KB Posted
- Attached to
- B-52 Bomb Bay Stands Federal contract opportunity
- Solicitation number
- FA812524Q0027
About this file
The provided document is a memorandum detailing the specifications for the fabrication of a prototype B-52 Bomb Bay Stand. The key details are:
The 76 AMXG is requesting the purchase of one (1) B-52 Bomb Bay Stand prototype. The prototype is to be fabricated at the manufacturer's facility, disassembled, shipped, and re-assembled at Tinker Air Force Base. The stand must fit the Bomb Bay area with no further design changes needed. A Non-destructive Inspection (NDI) is required on all welds for cracks, and a written report provided. The prototype must be painted OSHA Safety 13591 YELLOW or equivalent, and a Safety Data Sheet (SDS) provided. The contractor must also verify the load ratings through finite element analysis (FEA) performed by a certified engineer and provide the documentation.
The related federal contract opportunity is Solicitation Number FA812524Q0027 for B-52 Bomb Bay Stands. Contractors must have an active 2345 through the JCP Portal to receive the technical drawings and specifications, which will be released through DoD Safe.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment FA812524Q00270002 SF 30.pdf | ||
| A24-010 Bomb Bay Stands SOW Revision 1.pdf | ||
| Solicitation Amendment FA812524Q00270001 SF 30.pdf | ||
| Item Description for B-52 Bomb Bay Stands.pdf | ||
| Statement of Work for B-52 Bomb Bay Stands.pdf | ||
| Solicitation - FA812524Q0027.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
17 March 2024
MEMORANDUM FOR RECORD - Revision 1
SUBJECT: Item Description, A24-010 - B-52 Bomb Bay Stand
The 76 AMXG is requesting utilization of funds for the purchase of B-52 Bomb Bay Stand.
2. The requested equipment item descriptions/specifications are outlined below.
• Fabrication of ONE (1) B-52 Bomb Bay Stand prototype built to fit the Bomb Bay area and ensure no further design changes are needed. Once fitting test has been confirmed, this will be followed by a Non-destructive Inspect (NDI) on all welds for crack. Once the inspection is complete a written report will be provided to the
SME.
• The prototype will be built at manufacture’s facility, disassembled, shipped, and re-assembled at Tinker AFB, building 2121.
• All Stands will be painted with OSHA Safety 13591 YELLOW or Equivalent IAW FED STD 595C and a Safety Data Sheet (SDS) will be provided to the SME at time of final acceptance.
• Contractor must also verify load ratings through finite element analysis (FEA) performed by certified engineer and provide documentation. Removed by request from the SME 04/16/2024
1268063940C Cross-Out
File details come from the government source that posted it. Updated .