II.S-1. Solicitation - SPMYM426Q3330.pdf

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

Section A - Solicitation/Contract Form

DC DRIVE

SPMYM426Q3330

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

MENTOR MP DC DRIVE, 208-480VAC, 420 AMPS OUTPUT,

REGEN, 125HP @ 230VAC, 250HP @ 460VAC, LED KEYPAD,

WITH CONFORMAL COATING.

MFR: NIDEC. P/N MP420A4R-CC, SKU: 73200052243101.

Pricing Arrangement: Firm Fixed Price

3 Each

Section C - Description/Specifications/Statement of Work

Requirements

DC DRIVE

Additional Regulation or Supplemental Clauses Incorporated by Full Text

DLAD C01 DLAD PROC NOTE C01 (Oct 2025)

C01 Superseded Part Numbered Items (FEB 2025) When the award identifies supplies by manufacturer's name, Commercial and Government Entity (CAGE) code, and part number, the specified item(s) are the only item(s) acceptable under this contract. If an item part number is superseded during the term of this contract, the contractor shall advise the contracting officer immediately upon determination. The notice shall include complete information on the superseding item form, fit, function, configuration, application, or physical nature. The contracting officer will determine whether the item is acceptable to the Government, advise the contractor within seven days, and modify the contract accordingly.

DLAD C18 DLAD PROC NOTE C18 (Oct 2025)

C18 Shipping Instructions for Export and U.S. Territories (SEP 2024)

(1) Mail Instructions for shipments to container consolidation points (CCPs): Contact the Government Transportation Office for the Contract Administration Office: either DCMA for DCMA administered awards or DLA Distribution for awards administered by the issuing office. See Block 7 of Department of Defense (DD) form 1155 (page 1 of an order) to obtain shipping instructions for release to the carrier.

(2) Shipments to container consolidation points (CCPs): (a) Prepare shipments directed to a CCP shown with each individual CLIN on Schedule Continuation Sheet(s) in accordance with instructions provided within this contract for Preparation for Delivery.

(b) Contact the Transportation Officer for shipping instructions for the following CCP shipments: (i) Cargo requiring refrigeration/temperature control.

(ii) Classified or sensitive items requiring signature control.

(iii) When dimensions of an item or package exceed 456 inches (38 feet) long by 89 inches wide by 88 inches high, or weight exceeds 10,000 pounds. Cargo cannot exceed any one of the dimensions or the weight.

(iv) When volume or weight constitutes a full SEAVAN load for each activity code.

(v) Hazardous material such as material, which is flammable, corrosive, combustible, explosive, toxic, radioactive, unduly magnetic, or which contains oxidizing agents.

(vi) Type 1 shelf-life items,

(vii) TP1 and 2 (IPD 01-08) with RDD of 999, 777, or 555.

(3) The contractor shall furnish the above data no later than five (5) days prior to the scheduled shipment date for shipments weighing less than 10,000 pounds which will not be tendered as a carload or truckload

(4) The contractor may not ship prior to furnishing required data, regardless of weight.

(5) The contractor must clearly identify in invoices when shipment is made by air.

(6) The carrier must research the Transportation Facilities Guide (TFG) on the consignee to get information on who to contact to make delivery appointments. The carrier should schedule appointments as soon as they are given the load via the Carrier Appointment System (CAS)/prelodge desk prior to delivery of freight shipments (other than small parcels). Bills of Lading must be annotated with pertinent TFG data and carrier appointment times.

(7) The contractor will comply with the paragraph (6) and ship in accordance with instructions furnished by the Transportation office. The Transportation Officer will furnish the addresses of aerial terminals, as required. (Parcel post shipments will not be made to water or air terminals).

(8) Ship in accordance with instructions furnished by the Transportation office. The Transportation Officer will furnish the addresses of Aerial terminals, as required. (Parcel post shipments will not be made to water or air terminals).

DLAD C08 DLAD PROC NOTE C08 (Oct 2025)

C08 Tailored Logistics Support Purchasing Reviews (FEB 2017)

(1) From the commencement of performance of this contract until 3 years after the final contract payment, the contractor must allow the contracting officer, ACO, Defense Contract Management Agency (DCMA), Defense Contract Audit Agency (DCAA), and any other duly authorized representative of the contracting officer access to all records and information pertaining to those items or services for which the Government is relying on the contractor's purchasing system to determine that competition was obtained or to justify that prices are fair and reasonable. The contractor must maintain records subject to this clause for not less than 3 years after the contract final payment.

(2) The contracting officer may conduct reviews of purchased items or services provided under this contract regardless of dollar value that meet the criteria in paragraph (1) to ascertain whether the contractor has obtained the best value. The contractor must obtain competition to the maximum extent practicable for all purchases. Prior to purchasing any supplies or services, the contractor must solicit a competitive quotation from at least two independently-competing firms. For other than sole source items, the request for quotations must, to the maximum extent practical, solicit offers from different manufacturers or producers. If the contractor is unable to obtain quotes for competing items from two or more independently-competing firms, the contractor must retain documentation supporting its rationale for selection of the suppliers solicited and selected and its determination that the price was fair and reasonable. The contractor is responsible for maintaining this documentation for all sole source/non-competitive actions. The following price reasonableness and documentation requirements are applicable to all purchases, regardless of dollar value: (i) A price is reasonable if it does not exceed a price incurred by a prudent person in the conduct of competitive business. The contracting officer will examine the prices with particular care in connection with buys that may not be subject to effective competition restraints. The contractor's price will not be presumed to be reasonable. If an initial review of the facts results in a challenge of a specific price by the contracting officer or the contracting officer's representative, the burden of proof must be upon the contractor to establish that the price is reasonable under the standards in FAR Subpart 15.4 and FAR 31.201-3.

(ii) The contractor must keep the documentation to a minimum, but must retain data supporting the purchases either by paper or electronically. At a minimum, price quotations and invoices must be retained. Should the contractor receive an oral price quotation, the contractor must document who the supplier or subcontractor is by complete name, address, telephone number, price, terms and other conditions quoted by each vendor. Price quotes for supplies must be broken down by individual items, shipping costs, and any other included expenses. Price quotes for incidental services which are not pre- priced in the contract must include labor hours and costs or prices, as applicable, including the total price of the job, individual pricing for the portions of the work if applicable, materials, and all other elements of cost, overhead, and profit. This price breakdown documentation must be made for each subcontractor performing work on this contract.

(3) When applicable, if the contractor is purchasing from subcontractors or other sources and receives a discount or rebates, the contractor must immediately pass these savings to the Government in the contract price and invoice for payment. The contractor is required to use diligence in the selection of the most economical method of delivery of the product or services by selecting a best value method of delivery based on the urgency and nature of the work or product required. When labor hours are involved in the work to be accomplished and the contractor has not already pre-priced the effort to use its own labor force, the contractor must provide the labor at rates required by the contract (for example, Service Contract Act or Davis-Bacon Act rates) or at rates based on competition if mandatory rates are not required by the contract.

(4) If the contracting officer determines that the purchased product or service is unreasonably priced, the contractor must refund to the Government the amount the contracting officer determines is in excess of a reasonable price. The contracting officer must notify the contractor in writing in accordance with FAR 32.604 Demand for Payment, giving the basis for the determination and the amount to be refunded. The contractor must make the refund payment in accordance with directions from the contracting officer, and must provide proof of the refund payment to the contracting officer. The contracting officer may collect the amount due using all available means in accordance with FAR Subpart 32.6. FAR 52.232-17, Interest, is applicable to payments not made within 30 days of the demand for payment. Any disputes arising under this provision must be handled in accordance with the "Disputes" clause of this contract.

DLAD C02 DLAD PROC NOTE C02 (Oct 2025)

C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016) The contractor shall notify the contracting officer immediately upon determining the unavailability of obsolete materials or components. The contractor may recommend a solution to include the impact on the contract price and delivery. The contractor shall not initiate any item redesign or incur any additional costs without the express, written authorization of the contracting officer.

In the event that manufacturing phase-out or discontinuance of production of such items is contemplated, the contractor is required to notify the contracting officer and publish the discontinuance in the Government-Industry Data Exchange Program (GIDEP), where feasible; and to provide immediate advance notice of production phase-out to DLA DMSMS at dscc.dmsms@dla.mil.

DLAD C03 DLAD PROC NOTE C03 (Oct 2025)

C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023)

(1) By submitting a quotation or offer, the contractor is confirming it currently has, or will obtain before delivery, and shall retain supply chain traceability documentation, as described in paragraph (2) of this procurement note, demonstrating the item conforms to the technical requirements, and, for part numbered items, is from an approved manufacturer. (2) Supply Chain Traceability Documentation

(i) Supply chain traceability documentation shall include basic item description; part number; drawing or specification; national stock number;

manufacturing source; manufacturing source's Commercial and Government Entity (CAGE) code; and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to Government acceptance.

(ii) Supply chain traceability documentation shall also include, when available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

For part numbered items, contractors can find examples of acceptable supply chain traceability documentation at the Counterfeit Detection and Avoidance Program (CDAP) website (http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection- AvoidanceProgram/).

(iii) In addition, the contractor will obtain, retain, and provide to the contracting officer written documentation of all inspections and tests necessary to substantiate that the supplies furnished under this contract conform to contract requirements, including any applicable technical requirements for specified manufacturers' parts. Such records shall include, without limitation, test reports, test data, material certification, and manufacturing process sheets, in addition to any other information identified in the technical specifications applicable to the item.

(3) The contractor shall make supply chain traceability documentation available to the contracting officer within three business days upon the contracting officer's request. The contracting officer determines the acceptability and sufficiency of documentation. The contractor shall retain supply chain traceability documentation for ten years after final payment under this contract for audit and other valid government purposes. If the contractor fails to retain or provide the documentation, or the contracting officer finds the documentation to be unacceptable, the contracting officer may take corrective action, including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

DLAD C14 DLAD PROC NOTE C14 (Oct 2025)

C14 Correction of Nonconforming Packaging or Marking (MAY 2020).

(1) The Government may correct nonconforming packaging or marking for receipts of DLA- owned materiel if the estimated costs of correction are $1,000 or less. The contracting officer will advise the contractor of the discrepancy and that the Government has corrected the packaging or marking.

The contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government's costs to correct the deficiencies. Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies.

(2) If the estimated costs of correction for receipts of DLA-owned materiel are more than $1,000, the contracting officer will advise the contractor of the discrepancy and have the materiel returned to the contractor for correction/resubmittal; or, if there are urgent requirements, have the Government remediate the discrepancy at the contractor's expense. If the Government remediates the discrepancy, the contracting officer will make a determination concerning appropriate reimbursement by the contractor for the Government's costs to correct the deficiencies. Upon determining that reimbursement is required, the contracting officer will send a notice to the contractor. Upon receipt of notice from the contracting officer, the contractor shall reimburse the Government for the costs incurred by the Government to correct the deficiencies. *****

DLAD C04 DLAD PROC NOTE C04 (Oct 2025)

C04 Unused Former Government Surplus Property (SEP 2021) To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [__] No [__] The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [__] No __ The material conforms to the revision letter/number, if any is cited. Yes [__] No [__] Unknown __ If No, the revision does not affect form, fit, function, or interface. Yes__ No __ Unknown __ The material was manufactured by:

(Name): ______________________________________________________________________ (Address): ___________________________________________________________________

(2) The offeror currently possesses the material Yes __ No __ If yes, the offeror purchased the material from a Government selling agency or other source.

Yes __ No __ If yes, complete the following:

Government Selling Agency: ___________________________________________________ Contract Number: ____________________________________________________________ Contract Date: (Month, Year): __________________________________________________ Other Source: ________________________________________________________________ Address: ____________________________________________________________________ Date Acquired: (Month/Year) ___________________________________________________ (3) The material has been altered or modified. Yes __ No __ If Yes, complete the following:

Name of the company that performed the alternation or modification:

[(Address): __________________________________________________________________ Complete description of the alterations or modifications.

____________________________________________________________________________ (4) The material has been reconditioned. Yes __ No __ If Yes, complete the following:

(i) The price offered includes the cost of reconditioning /refurbishment. Yes __ No __ (ii) Name of the company that reconditioned the material.

(iii) Description of any work done or to be done, including the components to be replaced and the applicable rebuild standard.

____________________________________________________________________________ The material contains cure-dated components. Yes __ No __ If Yes, complete the following:

(i) The price includes replacement of cure-dated components. Yes __ No __

(ii) Cure date: ____________________

(5) The material has data plates attached. Yes __ No __ If Yes, insert all information contained on the data plate.

(6) The offered material is in its original package. Yes __ No __ If yes, complete the following:

Contract Number ______________________________________________________________

NSN_________________________________________________________________________

CAGE Code__________________________________________________________________ Part Number __________________________________________________________________ Other Markings/Data___________________________________________________________

(7) The offeror has supplied this same material (National Stock Number) to the Government before. Yes __ No __ If Yes, complete the following:

(i) The material being offered is from the same original Government contract number as that provided previously. Yes __ No __

(ii) State below the Government Agency and contract number under which the material was previously provided:

Agency ______________________________________________________________________ Contract Number_______________________________________________________________

(8) The material is manufactured in accordance with a specification or drawing. Yes __ No __ If Yes, complete the following:

(i) The specification/drawing is in the possession of the offeror. Yes __ No __

(ii) The offeror has stated the applicable information below: Yes __ No __ Specification/Drawing Number ___________________________________________________ Revision (if any) _______________________________________________________________ Date__________________________________________________________________________

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes __ No __ If Yes, complete the following:

(i) Material has been re-preserved. Yes __ No __

(ii) Material has been repackaged. Yes __ No __

(iii) Percentage of material that has been inspected is ____%; and/or

(iv) Number of items inspected is _______

(v) A written report was prepared. Yes __ No __ The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror will forward one of the following, within 24 hours of request by the contracting officer, to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

___ For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

___ For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

___ When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number. (This information has already been provided in paragraph (6) of this procurement note Yes __ No __) ___ When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government.

Describe:

This procurement note only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer's overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government.

All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order.

The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

Section D - Packaging and Marking

Section E - Inspection and Acceptance

Additional Regulation or Supplemental Clauses Incorporated by Full Text

DLAD E05 DLAD PROC NOTE E05 (Oct 2025)

E05 Product Verification Testing (MAY 2020)

(1) Product verification testing (PVT) under this procurement note will only apply when the contracting officer specifically invokes it in writing. The contracting officer may invoke PVT at or after contract award. If the contracting officer invokes PVT at contract award, the contract will explicitly state this testing requirement. If the contracting officer invokes PVT after contract award, the contracting officer shall notify the contractor and the cognizant DCMA ACO. The Government will perform PVT testing at a Government-designated testing laboratory.

(2) The contractor shall not ship or deliver any material until it receives notification of the acceptable PVT results, unless the contracting officer directs it to do so in writing The Government will provide the PVT results to the contractor within 20 business days after receipt at the Government testing facility, unless the Government specifies otherwise in writing.

(3) The contractor shall provide and maintain an inspection system acceptable to the Government in accordance with FAR Clause 52.246-2 or 52.246- 3; and maintain and make available all records evidencing those details if requested by the Government. When the Government finds evidence of risk associated with the contractor's sampling process, the Government may witness and evaluate the contractors sampling process. The contractor shall randomly select samples from the production lot(s), unless the contracting officer specifies otherwise in writing. The contractor shall ship the selected PVT samples with a copy of the system of record receiving report (i.e., WAWF, DD Form 250, or commercial shipping document) and the contractor's signed DD Form 1222. The contractor shall prepare the shipping container(s) by marking the external packages in bold letters, "Product Verification Test Samples - Do Not Post to Stock," Contract Number [contractor insert] and Lot/Item Number [contractor insert]" adjacent to the MIL-STD-129 (latest revision) identification markings. The contractor shall use a hard copy of the system of record receiving report as a packing list, in accordance with DFARS Appendix F. The contractor shall mark the exterior of the shipping container in accordance with MIL-STD- 129 (latest revision), paragraph 5.11. The contractor shall send samples by traceable means (e.g., certified or registered mail, United Parcel Service, Federal Express). The contractor shall include the following in the interior package: (a) Hard copies of the contract;

(b) Material certifications/process operation sheets; and

(c) Drawings used to manufacture the units and return shipping information.

(4) The Government will return samples that pass testing and are not destroyed during evaluation to the contractor at the Government's expense for the contractor to include as part of the total contract quantity to be delivered under the contract. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. If the Government does not return approved samples that pass testing to the contractor, the Government will consider those samples as part of the contract quantity for payment and delivery.

(5) If samples fail testing, the Government may reject the entire contract lot from which the contractor took the samples. The Government may, at its discretion, retain samples that fail testing without obligation to the contractor.

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Material is a QA-4 and has a 7-day acceptance timeframe.

DoDAAC: N32253 CountryCode: USA

PEARL HARBOR NAVAL SHIPYARD IMF

667 SAFEGUARD ST SUITE 100, PEARL HARBOR HI 96860-5033

PEARL HARBOR, HI 96860-5033

UNITED STATES

Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil Telephone: 808-473-8000x4961

Section F - Deliveries or Performance

Overall Contract Delivery Period

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Requested By Delivery Date 21 May

3 Each Ship To DoDAAC: N32253 CountryCode: USA

PEARL HARBOR NAVAL SHIPYARD IMF

667 SAFEGUARD STREET, BLDG 167-1 RECV 808-

473-8000X4961

PEARL HARBOR, HI 96860-5033

UNITED STATES

Government Representative, DLA Distribution Email: distrcustomerservice@dla.mil Telephone: 808-473-8000x4961

FoB Details Contractor Destination

Section G - Contract Administration Data

Additional Regulation or Supplemental Clauses Incorporated by Full Text

DLAD G01 DLAD PROC NOTE G01 (Oct 2025)

G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017) Contractors shall include the Transportation Control Number (TCN) and carrier shipment tracking information when submitting the DD250/iRAPT Receiving Report in Wide Area Workflow (WAWF) in order to assist with material inspection and acceptance. *****

Section H - Special Contract Requirements

DLAD H10 DLAD PROC NOTE H10 (Oct 2025)

H10 Exception to the Requirement for (DCAA) DLA Controlling Authority Approval (MAY 2024) The OEM or OCM asserts within its offer or otherwise confirms in writing to the contracting officer prior to award that it does not require access to DLA export-controlled technical data or information, and it will provide items that conform to the current revision of the applicable technical data.

If the offeror is a dealer or a distributor offering an item produced by an OCM, an OEM or OEM or OCM authorized manufacturer to complete performance, the offeror must,

(A) Have DLA controlling authority approval; and

(B) Provide documentation from the OEM or the OEM authorized manufacturer writing to the contracting officer prior to award that the OCM, OEM or the OEM authorized manufacturer it does not require access to export-controlled technical data or information and that it is offering items that conform to the current revision of applicable technical data; or

(C) Surplus offerors must have DCAA and meet the requirements of procurement note C04, Unused Former Government Surplus Property (see 11.390 (a)). The Contracting Officer must contact the product specialist to validate the item meets all current revision requirements for procurement note C04.

DLAD H15 DLAD PROC NOTE H15 (Oct 2025)

H15 Transporter proof of delivery (TPD) (JAN 2021)

(a) Definition. As used in this procurement note, transporter proof of delivery (TPD) means a commercial document that is generated by the Contractor and/or the Contractor's transporter of supplies and that is signed by the Government customer in order to document delivery of supplies under this contract/order. Examples of TPD are United Parcel Service (UPS) or Federal Express (FEDEX) delivery tracking reports. TPD documentation must include a customer signature, or visibility of the name of the customer who signed.

(b) When this procurement note is included in the contract or order, the Government may use TPD, in combination with adequate Contractor documentation cross-referencing the TPD to the specific supplies provided, as a basis for accepting the supplies. TPD with adequate supporting documentation satisfies the receipt report requirement and, coupled with acceptance, allows the Government to initiate the payment process, if all other applicable payment conditions are satisfied.

(c) To facilitate the payment process, the Government will initiate a request for the Contractor to provide TPD when the customer has not provided receipt acknowledgement to the buying activity. If TPD is requested and the Contractor agrees to provide it, the documentation must include the customer signature, or visibility of the name of the customer who signed, and as much of the following information as possible:

(1) Contract number or order number;

(2) Contract line item number (CLIN);

(3) Unit price;

(4) Quantity of items;

(5) Extended price;

(6) National stock number (NSN);

(7) Delivery date;

(8) Recipient organization's name and address;

(9) Receiving activity Department of Defense activity address code (DoDAAC);

(10) Requisition document number (and suffix, when applicable);

(11) Shipment number;

(12) Invoice number; and

(13) Location where the carrier made delivery (activity name, building number, city, state). (d) Process for submitting TPD documentation.

(1) Enter wide area workflow (WAWF) using the ``history folder,'' enter the appropriate contract data, and recall the receiving report (RR);

(2) Click on "attachment." Browse and upload the TPD and any additional Contractor documentation required to provide the information identified in paragraph (c) of this procurement note. (Attachments created in any Microsoft Office product or in PDF format are acceptable.); and

(3) Click on "submit."

(e) Responsibility for supplies.

(1) Title to the supplies passes to the Government after delivery to the point of first receipt by the Government and subsequent acceptance.

(2) Notwithstanding any other provision of the contract, order, or blanket purchase agreement, the Contractor shall:

(i)Assume all responsibility and risk of loss for supplies not received at destination, damaged in transit, or not conforming to purchase requirements;

and (ii)Replace, repair, or correct those supplies promptly at the Contractor's expense, if instructed to do so by the Contracting Officer within 180 days from the date title to the supplies vests in the Government.

Section I - Contract Clauses

Section J - List of Attachments

Section K - Representations, Certification, & Other Statements

Section L - Instructions, Conditions, & Notices to Offerors or Quoters

Additional Regulation or Supplemental Clauses Incorporated by Full Text

DLAD L08 DLAD PROC NOTE L08 (Oct 2025)

L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024)

(1) The Government will use the Supplier Performance Risk System (SPRS) (https://www.sprs.csd.disa.mil/) (formerly Past Performance Information Retrieval System - Statistical Reporting (PPIRS-SR)) and may use other performance history to evaluate suppliers past performance.

(2) SPRS collects quality and delivery data on previously awarded contracts and orders from existing Department of Defense reporting systems to classify each supplier's performance history by Federal supply class (FSC) and product or service code (PSC). The SPRS application provides the contracting officer quantifiable past performance information regarding a supplier's quality and delivery performance for the FSC and PSC of the supplies the Government is purchasing.

(3) The contracting officer will use the quality and delivery classifications identified for a supplier in SPRS to evaluate a supplier's past performance in conjunction with the supplier's references (if requested). The Government will use this past performance information in accordance with the basis for award stated in the solicitation. (4) SPRS generates classifications daily for each contractor. The SPRS Software User's Guide for Awardees/Contractors (https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf) and the SPRS Government User Guide (https://www.sprs.csd.disa.mil/pdf/SPRS_Government.pdf) provide instructions for accessing SPRS classifications.

Contractors have access to SPRS for their own classifications only. Suppliers are encouraged to review their own classifications; the SPRS reporting procedures and classification methodology detailed in the SPRS Software User's Guide for Awardees/Contractors (https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf); and the SPRS Evaluation Criteria (https://www.sprs.csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf). The SPRS Software User's Guide for Awardees/Contractors (https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf) provides the method to challenge a rating generated by SPRS.

DLAD L31 DLAD PROC NOTE L31 (Oct 2025)

L31 Additive Manufacturing (JUN 2018)

(1) Additive manufacturing (AM) is a process of joining materials to make objects from three- dimensional (3D) model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies, which remove material from areas where it is not desired, or other traditional manufacturing technologies, such as molding or stamping.

(2) Unless AM is specifically authorized in the solicitation/contract, quotes/offers may not include parts or supplies made using the additive manufacturing process. The Government will not evaluate offers that include an item or items produced using AM, and such offers are not eligible for award for the current procurement. A quoter/offeror proposing to supply an AM- produced item may submit a request to the contracting officer for approval of the item for evaluation by the Engineering Support Activity (ESA) for acceptability for future procurements of the same items. (3) If an item produced using AM is presented to the Government for inspection and acceptance that was not authorized in the solicitation/contract, the Government may reject the item as nonconforming.

HMDRFQINFO IMPORTANT RFQ INFORMATION (Jan 2026)

IMPORTANT RFQ INFO

IMPORTANT RFQ INFO

Contracting Specialist: ANGELA MORRELLI

Tel: 808-473-8000 ext. 4278 e-mail: angela.morrelli.civ@us.navy.mil

THE DOD AND NAVY REQUIRE PAPERLESS DISTRIBUTION OF PURCHASE ORDERS, CONTRACTS, AND

MODIFICATIONS. PLEASE PROVIDE YOUR E-MAIL ADDRESS BELOW:

PLEASE PROVIDE THE FOLLOWING INFORMATION SO YOUR COMPANY CAN BE ENTERED INTO OUR

COMPUTER SYSTEM

CAGE Code (Commercial & Government Entity No.) _____________

DUNS (Dun & Bradstreet) No. _________________________

SAM (System for Award Management) Yes No (circle one)

TAX ID NO. (TIN) _________________________

WITHOUT THE ABOVE INFORMATION AN ORDER MAY NOT BE AWARDED AND YOUR QUOTE MAY NOT

BE FAIRLY EVALUATED. PLEASE CALL 808-473-8000 EXT 5204 WITH ANY QUESTIONS.

The Contractor shall be registered in the SAM database prior to submitting an invoice and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

The SAM registration shall be for the same name and address identified on the contract, with its associated CAGE code and DUNS or DUNS+4.

Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls.

Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specified otherwise in the offer.

THE FOLLOWING INFORMATION MUST BE PROVIDED OR YOUR QUOTE MAY NOT BE ACCEPTED.

Provide your best delivery schedule:

Estimated delivery to Pearl Harbor days weeks months

Business size (in accordance with Federal Government Standards)

Small Large Woman-Owned Disadvantaged Other

Prompt Payment Terms_______% _______Days NET ______ https://www.acquisition.gov/

If on GSA Contract: [ ] GSA Contract #____________________Expiration Date: ______

IF PRICING IS ON "OR EQUAL" BRAND, PLEASE PROVIDE COPY OF LITERATURE/SPECIFICATIONS, MAKE AND MODEL OF ITEM BEING OFFERED.

VENDOR SHALL COMPLETE AND RETURN THE FOLLOWING PRICE INFORMATION: PRICES ARE BASED ON (Check one or more)

(1) [ ] Commercial catalog/published price list number _______________ date_________page________. ATTACH

APPLICABLE CATALOG/PRICE LIST PAGE.

Note: If quoted prices exceeds catalog/published price, explain

(2) Unpublished or internal Price List No. ______________

State means of verification:

Prices audited and approved by DCAA/DCASR ______________________

Last audit was on ________________________ (date).

(3) Sales history of this item for at least the last 12 months:

Government Commercial Sales dollar Volume:

Quantity of units sold:

Unite Price:

Contract number:

Award date:

METHOD OF PAYMENT IS GOVERNMENT PURCHASE CARD:

is applicable to this solicitation. Please note that the Government wide purchase card will be used as FAR Clause 52.232-36 the method of payment for supplies and/or services procured under this solicitation. If you are not able to accept payment by credit card, please provide reason(s) below:

METHOD OF PAYMENT IS WIDE AREA WORK FLOW (WAWF)

DFAR Clause 252.232-7003 (MAR 2008) ELECTRONIC SUBMISSION OF PAYMENT REQUEST AND RECEIVING REPORTS is applicable to this solicitation. Please note that the WAWF (Wide Area Work Flow) will be used as the method of payment for supplies and/or services procured under this solicitation. Information regarding WAWF is available on the internet at . If you are not able to accept payment by WAWF please provide the reason(s) below:https://wawf.eb.mil

Please provide the following information:

REFERENCE: RFQ

1. Manufacturer's Name:______________

2. Country of Origin:___________________

DLAD L22 DLAD PROC NOTE L22 (Oct 2025)

L22 Restriction of Alternate Offers for Source Controlled Items (SEP 2017)

(1) The manufacturers listed on the source control drawing applicable to the item in the procurement item description (PID) are the only approved sources. The item can be acquired from other suppliers, with adequate supply chain traceability documentation to demonstrate the item was produced by one of the approved manufacturers.

(2) DLA will not evaluate alternate offers for this item. Offerors who are interested in qualifying their product for purposes of future acquisitions must contact the design control activity specified on the source control drawing.

(3) Award of this solicitation will not be held pending qualification and approval of any product. If an offeror's product was recently approved but has not been added to the list of approved sources specified on the source control drawing, the offeror must submit a copy of the design control activity's letter of approval with its offer.

DLAD L06 DLAD PROC NOTE L06 (Oct 2025)

L06 Agency Protests (DEC 2016) Interested parties may file an agency level protest with the contracting officer or may request an independent review by the chief of the contracting office (CCO). Independent review by the CCO is an alternative to consideration by the contracting officer and is not available as an appellate review of a contracting officer decision on a protest previously filed with the contracting officer. Absent a clear indication of the intent to file an agency level protest with the CCO for independent review, protests will be presumed to be protests to the contracting officer.

DLAD L04 DLAD PROC NOTE L04 (Oct 2025)

L04 Offers for Part Numbered Items (SEP 2016)

(a) For part numbered items, identified in the item description only by the name of an approved source (CAGE code), a part number, and a brief description.

Exact product - applies to contract line-item(s) (CLIN(s)): _____ CAGE code __________ part number ________ Alternate product - applies to CLIN(s): CAGE code __________ part number ________ Superseding part number - applies to CLIN(s):

CAGE code __________ part number ________ Identify reason for superseding part number:

Administrative P/N change only: Yes____ No____

SPMYM426Q3330

https://wawf.eb.mil/

Minor change/No change in configuration: Yes____ No____ Previously-approved product - applies to CLIN(s): _____ Contract or Solicitation Number: ____________________ CAGE code __________ part number ________ Correction to CAGE/Part Number - applies to CLIN(s) _____ CAGE code in error/same corporation, different division Yes ___ No___ CAGE code in error/sold to different corporation Yes ___ No___ Part number not recognized Yes ___ No___ Obsolete part number Yes ___ No___ Other Yes ___ No___

(b) Exact product means a product described by the name of an approved source and its corresponding part number cited in the item description; and manufactured by, or under the direction of, that approved source. An offeror of an exact product must meet one of the descriptions below.

(1) An approved source offering its part number cited in the item description;

(2) A dealer/distributor offering the product of an approved source and part number cited in the item description;

(3) A manufacturer who produces the offered item under the direction of an approved source; and has authorization from that approved source to manufacture the item, identify it as that approved source's name and part number, and sell the item directly to the Government.

(4) A dealer/distributor offering the product of a manufacturer that meets the description in subparagraph

(3) above.

(c) Alternate product.

(1) The offeror must indicate that an alternate product is being offered if the offeror is any one of the following:

(i) An offeror who manufactures the item for an approved source cited in the item description, but does not have authorization from the approved source to identify it as the approved source part number, and sell the item directly to the Government;

(ii) A dealer/distributor offering the product of a manufacturer that meets the description in (i) above;

(iii) An offeror of a reverse-engineered product that is not cited in the item description; or (iv) An offeror whose product does not meet the criteria of exact product, superseding product or previously approved product.

(2) An offer of an alternate product is an alternate offer.

(d) The offeror must indicate that a superseding part number is being offered if the offered item otherwise qualifies as an exact product, except that the part number cited in the item description has been superseded due to an administrative part number change with no change in configuration of the item. (e) The offeror must indicate that a previously-approved product is being offered if the product offered has previously been delivered to the Government or otherwise previously evaluated and approved. (f) Correction to CAGE/Part Number Cited in the Item Description Submitted by offeror to notify the Government if there is a CAGE code error: same corporation/different division; sold to different corporation; part number not recognized; obsolete part number; other.

(g) Traceability documentation.

(1) The contracting officer may request evidence of the technical acceptability of the product offered. The evidence must be submitted within 2 days, or as otherwise specified, or the offer will not be considered.

(2) For offers of exact product, offerors other than the approved manufacturing source must retain evidence and provide the traceability evidence of the identity of the item and its manufacturing source when requested by the contracting officer.

(i) If offered item(s) are not in stock or not yet manufactured a copy of an original quotation from the approved source to the offeror identifying exact item cited in item description and a quantity sufficient to satisfy the solicitation requirement.

(ii) If offered item(s) are shipped or in stock, a copy of invoice on approved source's letterhead; or a copy of packing slip which accompanied shipment from approved source to offeror. The invoices and packing slips must identify exact item cited in item description and a quantity sufficient to satisfy the solicitation requirement.

(iii) If the offeror is an authorized dealer/distributor, or manufactures the item for an approved source, a copy of the contractual agreement with, or the express written authority of, the approved source to buy, stock, repackage, sell, or distribute the part.

The agreement must specifically identify the exact item, or otherwise ensure that the offeror is authorized by the approved source to manufacture or distribute the exact item being acquired. If the agreement covers a general product line or is otherwise not product specific, the offeror must furnish additional documentation to address the exact item being acquired.

(iv) Other verifiable information.

(3) For superseding part number, the offeror may be requested to furnish evidence to establish that there are no changes in the configuration of the part.

(4) For previously approved products, upon request of the contracting officer, the offeror must furnish the contract, solicitation, source approval request (SAR) package, or letter of approval under which the product was previously furnished or approved.

(h) Alternate offer data.

(1) The contracting officer may request drawings, specifications, or other data necessary to clearly describe the characteristics and features of an alternate offer. Data submitted shall cover design, materials, performance, function, interchangeability, inspection or testing criteria, and other characteristics of the offered product. The contracting officer may also request drawings and other data covering the design, materials, etc., of the exact product cited in the item description if the Agency does not possess data sufficient to evaluate the alternate product.