The file's text, extracted by GovTribe without its formatting.
PR Line Item
| Manufacture Part # |
| Description |
| Quantity |
| CLIN 0001 |
| CP122419 |
| Mt50 Torsion System - 50,000 lbf-in |
Max Speed 5 RPM Horizontal Test opening without grips - 26.6" Test Space - 19" Diameter 200 - 230 Volt 3 Phase 10 amp with Flying Leads Includes 50,000 lbf-in Torque Cell Interlocked Chuck Guard
| IP-MT2-R8 |
| Model 59-R8 control electronics for MT2 |
| 1 |
| CLIN 0001 |
| 2450-700 |
| Bluehill Universal Testing Software for NEW 3300, 3400, 5900, 59 Series, |
6800, 8800, and New EXTEND Retrofits
| 2450-700D9 |
| Torsion Application Module |
| 1 |
| 2450-700F1 |
| TestProfiler |
| 1 |
| 2450-700H1 |
| Analysis Module |
| 1 |
| 2450-700K1 |
| 5900 and 6800 Advanced Performance option |
| 1 |
| CLIN 0001 |
| 2490-696B4 |
| 21.5-inch Touch Monitor Only. Kickstand included. |
| 1 |
| CLIN 0001 |
| W-5510-T1 |
| Torsion Load Cell, 225 N-m (2000 lbf-in) Capacity |
| 1 |
| CLIN 0001 |
| CP116823 |
| One 4-jaw Independent Chuck for High Capacity MT Systems |
Torque Capacity 20,000 lbf-in One lathe chuck/grip with independent jaw faces
- Mounting plate to adapt chuck to drive output or torque cell
- All necessary mounting hardware Specimen Capacity: 0.39 and 9.84 in (10 and 250 mm) diameter Note: Adequate gripping strength to prevent specimen slippage during testing is not guaranteed for all materials and specimen geometries particularly round specimens.
Customer should consider preparing specimen ends with 4 or 8 flats to improve gripping performance.
| CLIN 0001 |
| W-MT01 |
| Keyless Drill-type Chucks |
| 1 |
| CLIN 0001 |
| W-MT02-B |
| Collet Grips, Large, Specimen diameters 6.3 to 14.25 mm (0.25 to 0.5625 in) |
| 1 |
| CLIN 0001 |
| W-MT03 |
| Socket Drive Set (Six Point), 57 Nm (500 lbf-in), US Customary, Specimen 3/8 to 1 inch |
| 1 |
| CLIN 0001 |
| CP129625 |
| Set of Two Adapter Plates for MT50 to allow Mounting of Low Force Grips and Fixtures. |
Duplicates Mounting Pattern of MT1 System.
Includes Adapter Plates, Mounting Hardware, and Alignment Discs
(service)
| System Installation and Integration |
| 1 |
| Instron Connect Agreement for New Systems or Software Upgrades/Updates |
| 1 |
(service)
| Onsite Integration of a customer-supplied computer and/or monitor |
| 1 |
(service)
| Enhanced Torque Verification, 2260 N-m (20,000 lbf-in) to 5650 N-m (50,000 lbf-in) |
| 1 |
| Enhanced Torque Verification up to 226 N-m (2,000 lbf-in) |
| 1 |
(service)
| Enhanced Rotary Stroke Verification (Both Directions) |
| 1 |
(service) Onsite Software Integration, Introduction to Bluehill Fundamentals and Test Method Development.
| PR Line Item |
| Manufacture Part # |
| Description |
| Quantity |
| CLIN 0002 |
| CP129675 |
| 9450 Drop Tower Impact System with Extended Base and Removable Temperature Chamber |
| 1 |
| C-9450-B2 |
| Data Acquisition System without Dashboard |
| 1 |
| C-9450-C5 |
| Data Acquisition system with 1 Strain Gauge channel, 1 Piezoelectric channel and 2 Analogic (-10 to +10 V) channels |
| 1 |
| C-9450-D1 |
| Electrical Supply: 100-120V, 50-60Hz Single Phase |
| 1 |
| C-9450-F2 |
| With pneumatic anti rebound device |
| 1 |
| C-9450-H2 |
| With High Energy System |
| 1 |
| C-9450-L1 |
| Without automatic lubrication and cleaning device |
| 1 |
| CLIN 0002 |
| 2490-696 |
| Operator Dashboard for new and existing 3300 / 3400 / 5500 / 5500A / 5900/ |
6800 Series Systems
| 2490-696B4 |
| 21.5-inch Touch Monitor Only. Kickstand included. |
| 1 |
| CLIN 0002 |
| C-7520-022REP |
| Light 9450/CEAST 9350 Tup Holder with masses verification report. |
| 1 |
| C-7520-021REP |
| Standard 9450/Ceast 9350 Tup Holder with masses verification report |
| 1 |
| C-7520-935REP |
| Reinforced 9450/CEAST 9350 Tup Holder with masses verification report. |
| 1 |
| C-7520-026REP |
| Additional Weights for Standard and Reinforced 9450/CEAST 9350 Tup Holder, with masses verification report. |
| 1 |
| CP131572 |
| Ultralight weight 1.0kg TUP Holder with 22kN Piezo Sensor TUP |
| 1 |
| C-7529-305ACC |
| Strain-gauge Instrumented Tup, Type 1, 222 kN (50,000 lbs) range, with Accredia verification certificate for the evaluation of measurement uncertainty |
| 1 |
| C-7520-022REP |
| Strain-gauge Instrumented Tup, Type 1, 22 kN (5,000 lbs) range. |
| 1 |
| C-7520-022REP |
| Strain-gauge Instrumented Tup, Type 1, 90 kN (20,000 lbs) range. |
| 1 |
| CLIN 0002 |
| C-7529-311 |
| Insert, Hemispherical, 12.7 mm (1/2 in) Diameter. |
| 1 |
| C-7529-322 |
| Insert, Hemispherical, 16 mm (5/8 in) Diameter. |
| 1 |
| C-7529-350 |
| Insert, flat faced. |
| 1 |
| CLIN 0002 |
| C-7520-043 |
| Clamping Set for Plates According to ASTM D3763 and ASTM D5628 geometries FA and FD. |
| 1 |
| C-7520-353 |
| Support Stand for CAI Testing of Composites - Imperial Version (Steel). |
| 1 |
| C-7520-020 |
| General Purpose T-Slot Plate, Stand Mounted. |
| 1 |
| C-7520-035 |
| Adjustable Height Stand for Specimen Support. |
| 1 |
| C-7520-037 |
| General Purpose Plate, Stand Mounted. |
| 1 |
| C-7520-039 |
| Adapter to Mount Specimen Supports to Adjustable Height Stand. |
| 1 |
| CLIN 0002 |
| C-7520-290 |
| Instrumented Vice for ISO 8256 method A |
| 1 |
| C-7520-299 |
| Dedicated striker for ISO 8256 method A - Tensile Impact test |
| 1 |
| C-7520-295 |
| Clamping for specimen (fixed grips) - ISO 8256 method A specimen types 1 and 3 |
| 1 |
| C-7520-296 |
| Clamping for specimen (fixed grips) - ISO 8256 method A specimen types 2 and 4 |
| 1 |
| C-7520-271 |
| Calibrated Free Tensile Grips - 30 g. |
| 1 |
| C-7520-272 |
| Calibrated Free Tensile Grips - 60 g. |
| 1 |
| C-7520-273 |
| Calibrated Free Tensile Grips - 120 g. |
| 1 |
(service)
| System Installation and Integration |
| 1 |
| Instron Connect Agreement for New Systems or Software Upgrades/Updates |
| 1 |
(service)
| Onsite Integration of a customer-supplied computer and/or monitor |
| 1 |
(service)
| CEAST Drop Tower Striker (Tup) verification/calibration: |
| 3 |
| (Drop Towers with high energy spring assist) Standard Verification |
| 1 |
| Drop Tower - Thermostatic Chamber verification/calibration for up to 2 temperature ranges. |
| 1 |
(service)
| Basic System and Software Introduction for CEAST Impact Systems , Pendulums and Drop Towers |
| 1 |
| Enhanced Impact Extended System and Software Instruction |
| 1 |
| PR Line Item |
| Manufacture Part # |
| Description |
| Quantity |
| CLIN 0003 |
| 2495-925 |
| WaveMatrix 2 Dynamic Testing Software for Instron 8800, 8800MT and |
ElectroPuls Systems
| 2495-925D1 |
| WaveMatrix2 Calculation Module |
| 1 |
| 2495-925E1 |
| WaveMatrix2 Advanced Control Module |
| 1 |
| CLIN 0003 |
| 2495-930 |
| Bluehill Fracture software for 8800 and 8800MT systems |
| 1 |
| 2495-930A3 |
| Crack Growth, Pre-Cracking, KIc and JIc test modules |
| 1 |
| CLIN 0003 |
| 2450-730 |
| Bluehill Universal Testing Software (Update or Upgrade) |
| 1 |
| 2450-730B6 |
| Bluehill Universal for existing Bluehill Universal license (out of warranty) |
| 1 |
| 2450-730E1 |
| Test Method Suite - Application Module Suite for New Purchase |
| 1 |
| 2450-730H1 |
| Analysis Module |
| 1 |
| CLIN 0003 |
| 2527-102 |
| Dynacell, Dynamic Load Cell. ±10 kN (±2250 lbf). |
| 1 |
| CP135281 |
| Custom Piggyback Adapter from 500kN load cell to 10kN Cell |
| 1 |
| CLIN 0003 |
| 2840-119 |
| 150 mm (6 in) Diameter Fatigue Rated Compression Platens. |
| 1 |
| CP135282 |
| Custom Attachment Kit to connect 2840-119 platen to 500kN Actuator and load cell |
| 1 |
| CLIN 0003 |
| 2663-901 |
| Advanced Video Extensometer 2 (AVE 2) |
| 1 |
| CP135315 |
| Custom Mounting for AVE2 on 8503 Load Frame |
Mounts via 2 -off M10 holes and connection to column Ambient use only - not for use with Chamber
| 2663-901E1 |
| Standard Field of View Lens - 16 mm Focal Length |
| 1 |
| 2663-901J1 |
| Standard - Illumination kit for FOVs less than 250 mm |
| 1 |
| 2663-901R2 |
| Free 90 day trial of DIC Replay |
| 1 |
| 2663-901T1 |
| Mark-based Transverse Strain Measurement |
| 1 |
| 2663-901U1 |
| Dynamic Strain Measurement and Control |
| 1 |
(service)
| Onsite Integration of a customer-supplied computer and/or monitor |
| 1 |
(service)
| Hardware Integration and Instruction |
| 1 |
Standard Hardware Integration and Instruction
Travel/Logistics Fee 3 for Tensile Service.
(service)
| Enhanced Force Verification, 0-300 KN (0-67,442 lbs), BOTH DIRECTIONS (Tension and Compression). |
| 1 |
(service)
| Standard ASTM E83 Strain Verification 2 |
| 1 |
(service)
| Advance Fatigue Extended System and Software Introduction (Wavemaker and MAX). |
| 1 |
(service)
| 2-Day on-site customized training for Bluehill Fracture Mechanics Software |
| 1 |
| Travel for Training Specialist |
| 1 |