1-_EPIQ_SOW.pdf

STATEMENT OF WORK (SOW)

Defense Threat Reduction Agency Security and Counterintelligence (SC) Directorate

8725 John J. Kingman Road, Mailstop 6201 Fort Belvoir, VA 22060-6201

May 16, 2018

EPIQ Solutions Flying Fox + Calypso Kit

1.0 Introduction/Background:

The Security and Counterintelligence Directorate’s Technical Security Branch is requesting the purchase of one (1) EPIQ Solutions Flying Fox + Calypso Kit. The Flying Fox is a The EPIQ Solutions Flying Fox is a portable sensor suite designed to detect and locate WiFi and Cellular emanations. The suite employs the use of multiple sensors placed throughout a controlled space to triangulate and give approximate location of a potentially unauthorized 802.11 (WiFi) or LTE, UMTS/WCDMA, GSM/CDMA2000 (Cellular) signal. The Flying Fox incorporates the use of a Government Off-the-Shelf software produced by the Naval Research Laboratory, Flying Squirrel. Flying Fox will enhance DTRA's technical threat mitigation strategy by identifying and locating potentially unauthorized wireless devices. EPIQ Solutions is currently the sole provider of the Flying Fox + Calypso Kit; it is not available through any other distributors.

2.0 Applicable Documents:

PP-SCSO Technical Surveillance Countermeasures (TSCM) activities must be conducted using equipment manufactured under specific sourcing criteria at the circuit board level.

While there are many other manufacturers out there, the chips and boards used in their equipment cannot be guaranteed against tamper or compromise. The EPIQ Solutions Flying Fox + Calypso Kit is an approved TSCM item and the equipment has been certified against tamper or compromise. No other manufacturers can provide these assurances thusly, sole source purchases cannot be avoided. Additionally, the manufacturer has the authority to install the Naval Research Laboratory’s restricted distribution Flying Fox program. Other vendors may not have this authority and cannot guarantee their product would provide the Operational Security (OPSEC) assurances to protect the tactics, techniques, procedures, capabilities, and limitations of DTRA TSCM and could potentially compromise limitations of all other TSCM programs that use this software in their inventory. This procurement must be procured with OPSEC considerations in mind and should not be published in Federal Business Opportunities (FedBizOpps) to meet the requirements of classification guidance in DOD Instruction C-

5240.08 Security of DoD Installations and Resources and the DoD Physical Security Review Board (PSRB) Section E2.6.

3.0 Requirements:

The EPIQ Flying Fox + Calypso Kit will include the following:

3.1 Deployable Flying Fox Sensor (4x) Kit with Orb-weaver and Spotlight includes:

- One Matchstiq S10 with Skylight cellular survey capability

- One Dell Laptop (pre-loaded with Orb-weaver and Spotlight software)

- Four Flying Fox sensors

- One PoE+ switch supporting operation of up to four Flying Fox sensors

- Four Cat 6 cables, 50 ft

- Two Cat 6 cables, 6 ft

- Four cellular antennas

- Four Wi-Fi antennas

- Hard carrying case for kit

- One year hardware warranty

- One year Software Maintenance:

For one year after delivery, Epiq will provide support (phone, email, and web-based support) and software/firmware updates with feature enhancements and bug fixes.

3.2 ES012-120 Calypso Precision Localization Kit, which includes:

- One Rapidly Deployable Base Station (Calypso Kit)

- One System Controller

- One Handheld Direction Finding Unit

- Seven antennas supporting various functions (Handheld, survey and

GPS)

- Power supplies and other miscellaneous peripherals

- 1 year hardware warranty

3.3 The contractor shall provide deliverables in accordance with the Contract Data Requirements List (CDRLs) DD Form 1423