BAM_Functional_Test_Plan.docx

Business Application Mapping (BAM) Functional Test Plan October 9, 2013

INTRODUCTION

PURPOSE OF THE TEST PLAN DOCUMENT

The functional test plan document documents and tracks the necessary information required to effectively define the approach to be used during the competitive range testing for the Business Application Mapping (BAM) solution. The target audience is the evaluation team, the testing team and the vendor.

COMPETITIVE RANGE TESTING

TESTING OVERVIEW

The vendor will work with the government for one day to develop a detailed use cases specific to their solution to test the BAM functional items listed in section 2.3. The vendor will be required to work with the government to install and configure the application according to the applicable Department of Defense (DoD) Security Technical Implementation Guides (STIG) the offered BAM solution in a mid-tier and a mainframe environment for testing. Two weeks will be provided to complete both installations. The DoD STIG documentation is referenced in the PWS.

The vendor will provide the government testing team a job aide related to the functional items to be tested in order to assist the test team in navigating the system during testing. Vendor support will be available to the government during the two days allotted for the testing to answer questions and address any concerns.

The vendor will have the two days following testing to mitigate any failures or other issues related to testing. Retesting of findings will be completed in one day. Results after this time frame will be final.

TEST RISKS/ISSUES

Any mitigation provided during testing is assumed to be captured by the vendor as an item to be resolved in the tool prior to deployment if an award is made.

ITEMS TO BE TESTED

TEST PASS/FAIL CRITERA

In the detailed use cases, expected results will be identified. When expected results are achieved, the test will be documented as passing. When expected results are not achieved, the test will be documented as a failure.

TESTING DELIVERABLES

Testing deliverables include the job aide, detailed use cases and a test results document.

TESTING ENVIRONMENT

The physical location for testing will be Mechanicsburg, PA. The physical location of the environments will be Mechanicsburg, PA for mainframe and Montgomery, AL for mid-tier.

image1.png