GITMO EQUIPMENT LIST SPE3SE23Q0520.docx

Item 1

4 ea GRIDDLE, ELECTRIC, COUNTERTOP Lang Manufacturing Model No. 172T

LG Heavy Duty Griddle, electric, countertop, 72" W x 23" D cooking surface, 1" thick polished steel griddle plate, 200°‐550° F snap‐action thermostat and 6000W elements every 12", welded steel frame with stainless steel exterior, 5" tapered wrap‐around splash guard, 8qt grease drawer, 4" stainless steel legs with 1‐5/8" adjustment, (2) 18.0kW, NSF, Made in USA Dimensions 15(h) x 72(w) x 28.2(d)

4 ea 2 yr. parts & labor warranty, continental USA, Hawaii & Canada, standard 4 ea (172T) 208v/240v/60/3‐ph, 50.0 amps, field wired, field convertable to 1‐ph, standard

INSTALLATION

SHIP ITEMS TO BLOUNT ISLAND TERMINAL FL

INSTALLATION TO INCLUDE REMOVE EXISTING GRIDDLES TO BACK DOCK

UNCRATE AND SET IN PLACE NEW GRIDDLES, CONNECT TO EXISTING UTILITIES WITHIN 5 FT, START UP AND TEST, WORK TO BE DONE DURING NORMAL BUSINESS HOURS

Item 2

7 ea KETTLE, DIRECT STEAM, STATIONARY Cleveland Range Model No. KDL125

Kettle, direct steam, 125‐gallon capacity, 2/3 steam jacket design, open tri‐leg base, stainless steel exterior finish with 316 series stainless steel liner, 2" tangent draw‐off, spring assist cover, 35 psi Rating

7 ea 1‐year parts & labor warranty, standard 7 ea Performance start‐up included at customer request after equipment is installed (Free Water Quality Check included) (contact Cleveland Sales Representative for details) 7 ea 2" Tangent draw‐off, standard 7 ea SCK1 Steam Control Kit, direct steam stationary kettle, includes steam trap, condensate strainer, check valve 7 ea PRV (PN 22200) Pressure Reducing Valve 7 ea SPK5 Single Pantry Faucet (All Stationary Kettles, KEL25, KEL40, KEL60, KEL80, KEL100, KGL25, KGL40, KGL60, KGL80, KDL25, KDL40, KDL60, KDL80, KDL100)

1 ea SHIPPING INCLUDES SHIPPING TO BLOUNT ISLAND TERMINAL, JACKSONVILLE FL

REMOVE (7) EXISTING KETTLES TO BACK DOCK

UNCRATE, SET IN PLACE, CONNECT TO EXISTING UTILITIES (7) NEW

KETTLES, START UP AND TEST FOR PROPER FUNCTION

Item 3

1 ea DISHWASHER, FLIGHT TYPE Champion Confidential Model No. EUCC4

GSA

(5‐4‐5, 14ft.) C Series Slimline Upright Conveyor Dishwasher, 24" wide peg belt, Dual Rinse feature, automatic tank fill, vent fan control, electric eye idle pump shut‐off & rinse saver, stainless steel base & legs, push‐button start‐stop station ‐ load end, stainless steel front end enclosure panels, SST pumps & impellers, re‐circulating flushing nozzles ‐ load end, vent openings with 7" stainless steel stacks & locking dampers ‐ both ends, anti‐jam & reverse switch, cULus, NSF , ENERGY STAR®

1 ea Supervision of Reassembly & Start‐Up. M‐F, 8am – 5pm, please allow (5) days advance notice for scheduling. Factory supervision is coordinated via the Champion service department at 1‐800‐858‐4477.

1 ea 1 year parts warranty ONLY, no service network outside the US.

1 ea Direction of Operation To Be Determined 1 ea A‐2.5 ft. load section 1 ea B‐2.5 ft. prewash section with external scrap tank with basket 1 ea C‐4 ft. wash section 1 ea D‐5 ft. dual rinse‐unload section 1 ea Electric tank heat with thermostat & positive low‐water cut‐off (single tank) 1 ea Voltage to be 208v/3ph 1 ea Electric Booster Heater, built‐in, 70°F maximum rise 1 ea Insulated hinged doors in lieu of standard lift up doors.

1 ea Cold water thermostat for prewash, c/w Cold Water PRV 1 ea All purpose single pitch peg belt, standard 1 ea Sheet pan peg belt. (Allows sheet pan entry length‐wise into the machine) 1 ea Champion CC208C Water Softening System, 5,326 grains/lb. capacity, 9 gal. regeneration volume, holds two bags of salt, c/w installation kit & hoses. Installation not included. (NET/NET)

CHEMICAL DISPENSING EQUIPMENT BY OTHERS

Champion Confidential Model No. EUCC4

GSAOLM

• Supervision of Re‐assembly

• Removal/ disposal of existing equipment

• Receive new machine, deliver to site, uncrate, assemble, set in place

• Rough clean and silicone equipment as required

• Inter‐wire and plumb sections, set belt tension

• Electrical, Water and Drain to Owner supplied utility within 5ft

• New drain piping to be installed to the floor drain

• Start up of machine included

**Modifications to house utilities and ventilation to accommodate new unit by others (Plumbing and electrical connections will be made by qualified worker who will observe all applicable sanitary codes, safety codes, and the National Electric Code) Prior to food service equipment being delivered to job site, it is the responsibility of the GC/Owner to provide the following:

• Adequate and unobstructed access to designated areas

• Temporary utilities and adequate lighting

• Floors broom‐swept

• Ceiling completed, including, lighting fixtures and lamps installed

• All finishes on walls, floors and ceilings complete with final finishes

Non‐union rates applied Regular work hours are Mon.‐Fri. 8:00 A.M. ‐ 5:00 P.M. No weekends or holidays. Two week scheduling notice requested. Coordination through Champion service department at 800‐858‐4477

1 ea DUCTWORK CONNECT TO DUCTWORK 1 ea WASTER COLLECTOR 1 ea SOILED DISH TABLE 1 ea WELDING

Item 3

1 ea Custom Model No. SOILED DISH TABLE

GSA OLM

276" x 178" "L" SHAPE X 48" W 14 GA STAINLESS STEEL TOP WITH 10 1/2" SPLASH AT WALLS DROP OFF WINDOW OPENING 30" WITH TRIM (1) WELD IN COLLECTOR TOP (COLLECTOR TOP SUPPLIED BY OTHER)

(1) COLLECTOR CONTROL BRACKET

(1) TROUGH WITH PROVISION FOR GUSHER HEADS AS REQUIRED

(1) FULL COMPLIMENT OF GRAVITY ROLLERS

(1) PROVISION FOR DECK MOUNT PRE‐RINSE FAUCET (FAUCET BY OTHER)

PROVISION FOR 100" DISH WASHER STAINLESS STEEL LEGS, CROSS RAILS AND ADJUSTABLE FEET

Item 4

1 ea WASTE COLLECTOR Salvajor Model No. S419

GSAOLM Trough Collector™, trough conveyor & collecting system (widely accepted in areas where disposers are restricted), HYDROLOGIC® with LCD readout, trough diffuser, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion‐resistant pump, pump intake screen ,stainless steel construction, start/stop pushbutton control panel, with safety line disconnect & automatic shut off timer, UL, CSA, CE, NSF Dimensions 35.88(h)

1 ea Collector top is available to ship to the fabricator in advance of unit (additional shipping charges will apply). Please provide instructions on order 1 ea 208v/60/3‐ph, 3.2 amps 1 ea RSS Remote start/stop switch for all controls (HydroLogic control with operator sensor comes standard mounted to SM/PSM models. ONLY add if additional on/off control is required) 1 ea 980104 Mounting bracket for RSS, MSS, MSS‐LD, MRSS, MRSS‐LD 1 ea 419CISS Trough Collector™ full stainless steel cover 1 ea 992013 Additional scrap basket

SHIPPING ALL ITEMS TO BLOUNT ISLAND TERMINAL FL