Fybroc Pumps Specification 2023.pdf
PDF 215 KB Posted
- Attached to
- Fybroc Pumps Federal contract opportunity
- Solicitation number
- 12305B23Q0174
About this file
This specification document outlines requirements for eleven new Fybroc pumps to replace older pumps in a recirculating aquaculture system. The pumps are needed by the USDA Agricultural Research Service at the National Cold Water Marine Aquaculture Center in Franklin, ME to support research on salmon genetics and breeding. The specification requires six Fybroc 1530-4X6X10 VR1 pumps with 7.5HP motors, two Fybroc 1530-3x4x8 VR1 pumps with 5HP motors, two Fybroc 1530-4x6x10 VR1 pumps with 5HP motors, and one Fybroc 1530-4x6x10 VR1 pump with a 5HP motor. All pumps must match the specifications of the pumps being replaced and include carbon/ceramic seal faces, fiberglass-reinforced resin construction and 316SS stub shafts. The period of performance for the contract is by September 15, 2023. The related federal contract opportunity was solicitation number 12305B23Q0174 for Fybroc pumps through the Department of Agriculture Agricultural Research Service Field Research Implementation and Information Delivery Northeast Area.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| solesource - Fybroc pumps_Redacted.pdf | ||
| Contract Terms and Conditions.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specification Document
Background.
The USDA-Agricultural Research Service is conducting research on salmon genetics and breeding at the NCWMAC in Franklin, ME.
Project objective.
Eleven new Fybroc pumps of correct size, power, and pumping capacity are needed to replace older Fybroc pumps (same models) that have reached end of life. These pumps are used to pump water in a customized recirculating aquaculture systems (RAS) at the National Cold Water Marine Aquaculture Center (NCWMAC).
Specifications:
Quantity of six FYBROC 1530-4X6X10 VR1 PUMP Includes:
• FY 1530 4x6x10 VR-1 Pump, 7.5HP Motor.
• Fybroc pump and motor unit identical to replace unit with SN 060522
• Fybroc 1530 4x6x10 Pump
• VR-1 construction
• Outside seal: carbon/ceramic faces, viton elastomers
• 10.25" Impeller
• Dynamically balanced
• Close coupled to a 7.5HP 1200RPM TEFC Motor
• John Crane 8B2 Seal
• Fiberglass reinforced resin pump construction with internal cover flush
• 316SS stub shaft
• Casing drain
• Gauge taps
• 3/60/230-460VAC Mill & Chemical duty premium efficient 184JM frame motor with normally closed (N-C) thermostats.
• Service: 666 GPM @ 25'TDH
Quantity of two FYBROC 1530-3x4x8 VR1 PUMP
• FY 1530 3x4x8 VR-1 Pump, 5HP Motor.
• Fybroc pump and motor unit identical to replace unit with SN 060518
• Fybroc 1530 3x4x8 Pump
• VR-1 construction
• Outside seal: carbon/ceramic faces, viton elastomers
• 6.875" Impeller
• Dynamically balanced
• Close coupled to a 5HP 1800RPM TEFC Motor
• John Crane 8B2 Seal
• Fiberglass reinforced resin pump construction with internal cover flush
• 316SS stub shaft
• Casing drain
• Gauge taps
• 3/60/230-460VAC Mill & Chemical duty premium efficient 184JM frame motor with normally closed (N-C)
• Service: 270 GPM @ 25'TDH
Quantity of two FYBROC 1530-4x6x10 VR1 PUMP
• FY 1530 4x6x10 VR-1 Pump, 5HP Motor.
• Fybroc pump and motor unit identical to replace unit with SN 060513
• Fybroc 1530 4x6x10 Pump
• VR-1 construction
• Outside seal: carbon/ceramic faces, viton elastomers
• 8.75" Impeller
• Dynamically balanced
• Close coupled to a 5HP 1200RPM TEFC Motor
• John Crane 8B2 Seal
• Fiberglass reinforced resin pump construction with internal cover flush
• 316SS stub shaft
• Casing drain
• Gauge taps
• 3/60/230-460VAC Mill & Chemical duty premium efficient 215JM frame motor with normally closed (N-C)
• Service: 336 GPM @ 24'TDH
Quantity of one FYBROC 1530-4x6x10 VR1 PUMP
• FY 1530 4x6x10 VR-1 Pump, 5HP Motor.
• Fybroc pump and motor unit identical to replace unit with SN 060371
• Fybroc 1530 4x6x10 Pump
• VR-1 construction
• 8" Impeller
• Close couple to a 5HP 1200RPM TEFC Motor
• John Crane 8B2 Seal
• Fiberglass reinforced resin pump construction with internal cover flush
• 316SS stub shaft
• Casing drain
• Gauge taps
• 3/60/230-460VAC Mill & Chemical duty premium efficient 184JM frame motor with normally closed (N-C)
Period of Performance: By 9/15/2023
Specification Document
File details come from the government source that posted it. Updated .