Forklift Specs PDF.pdf

Specifications for Warehouse Forklift Scope The Bureau of Reclamation, Glen Canyon Field Division (GCFD) has a requirement for

(1) Forklift delivered to GCFD Warehouse, located in Page, Arizona.

General Requirements Reclamation is replacing the forklift at their warehouse. The Forklift Replacement must have at a minimum the following:

• 5,000-6,000 lb. carrying capacity

• LPG Engine or Dual Fuel (LPG/Gasoline)

• Solid Pneumatic Tires

• Rearview mirror

• Headlights

• Flashing light

• Rear Safety Light

• 48” Forks

• 72" forks with extensions

• Fire Extinguisher

• Steel Non-Enclosed Cab

• Side Shift

• Emergency/Park Brake

• Capable of driving on indoor and outdoor terrain such as gravel and asphalt

Optional Accessories

Swing Mast

All equipment shall all be compatible with quoted forklift.

The equipment listed above will be priced separately. The BOR reserves the right to decide if the option will be purchased at time of award.

Standards and Code Requirements Forklift will meet the following standards and codes:

• Occupational Safety and Health Standards - 29 CFR 1910.178 – Powered Industrial Trucks; General requirements.

• American National Standard for Powered Industrial Trucks, Part II, ANSI B56.1-1969

- Safety Standard for Powered Industrial Trucks.

Service and Parts Requirements The Vendor shall provide a point of contact/dealer for the forklift, that can respond in 72 hours from the time the issue is reported and if they have the capability for onsite for repairs if needed. If the Vendor cannot provide contact or dealer that can respond in 72 hours, they shall provide the closest contact/dealer and the response time from the notice of issue including if they have the capability of onsite repair. The vendor shall a provide information on part availability and delivery, for commonly replaced and available spare parts.

Delivery Delivery shall be freight on board destination (GCFD) and shall be included in the total cost. The Contractor shall state the best schedule they can provide for delivery of the proposed equipment after receipt of award.

Delivery of compact track loader will be between the hours of 7:00 AM to 4:00 PM Monday through Thursday. The Contractor shall give notice of at least 48 hours prior to delivery GCFD.

Point of contact for delivery will be:

Audie Blackwell, ablackwell@usbr.gov (928) 645-0433 or Michelle Etsitty, metsitty@usbr.gov (928) 645-0434 Delivery address is as follows: Bureau of Reclamation, Glen Canyon Field Division, 805 Bureau St, Page, AZ 86040

Submittals for Quotations Vendor quotations shall include the following to be deemed acceptable:

1. Description of the forklift being quoted in sufficient detail to evaluate compliance with the stated specifications. Including any brochures and/or cut sheets to confirm the items meet the needs of the requirement.

2. The Vendor shall provide a point of contact/dealer for the forklift, that can respond in 72 hours from the time the issue is reported and if they capability for onsite for repairs if needed. If the Vendor cannot provide contact or dealer that can respond in 72 hours, they shall provide the closest contact/dealer and the response time from the notice of issue including if they have the capability of onsite repair. The vendor shall a provide information on part availability and delivery, for commonly replaced and available spare parts.

3. Standard Manufacturer warranty with stated terms.

4. Lead time for (FOBD) delivery after receipt of award.

5. The contractor must list any exceptions when submitting quote.

mailto:ablackwell@usbr.gov mailto:metsitty@usbr.gov

If vendor fails to submit the above information the quote can be found to be non-responsive.