Filtered supercontinuum laser system SOW.pdf

S

Statement of Work: Filtered Supercontinuum Laser System 1 Last Saved: 1/26/2021 3:38 PM Double-click on for further assistance.

Use this Statement of Work document to purchase an item and/or item-related services.

TITLE: Filtered Supercontinuum Laser System Requesting Lab/Division/Group: PML/686/Group 1 Sources and Detectors Requisition Number: NB6860800-000

Statement of Need The Sources and Detectors group at NIST is responsible for the calibration of the responsivity of radiant power detectors. In order to calibrate and characterise new detectors, we require a wavelength tuneable, pulsed laser source. We have identified a supercontinuum laser source system as the best option fulfilling all our requirements; wavelength coverage from 400 nm to 2500 nm, selectable repetition rate from 150 kHz to 60 MHz, less than 100 ps pulse width, spectral power density of at least 2.5 mW / nm over the wavelength range and less than 5 nm FWHM bandwidth output over the whole wavelength range. The supercontinuum laser source system will be used to characterise and calibrate detectors, and components over the wavelength range mentioned.

Items and/or item-related services Section Requirements Related Information Items/Service (required)

• System must contain at least one supercontinuum laser source and one tuneable filter to fulfill our requirements

• For repetition rates above 150 kHz, the output spectral power density should be at least 2.5 mW/nm over at least 90 % of the range 400 nm to 2500 nm, with at least 1.5 W visible power 350 nm to 850 nm.

• Must be able to cover a variable, selectable repetition rate from 150 kHz to at least 60 MHz

• Must have power lock external input function

• Must have single-mode spectral output coverage from 400 nm to 2500 nm

• Must include a spectral filter to maintain pulses of less than 5 nm bandwidth over the whole spectral range 400 nm to 2500 nm

• Must maintain full-width-half-maximum pulse widths of less than 100 ps over the whole spectral range at the output of the spectral filter for repetition rates above 150 kHz

• Must have spectral filter, out-of-band

Enter related information here

Statement of Work: Filtered Supercontinuum Laser System 2 rejection of at least 60 dB

• Harmonic filters for the 325-500 nm region and 500-850 nm / 850-1250 nm region shall be included. The latter region may include two blocking filters

• The input to the tuneable filter shall be fibre-coupled and the output of the filter shall be supplied with the option of being fibre-coupled, with an xyz adjustment providing optimal coupling

• The filter output shall be supplied with two aligned multimode fibres – one collimated, the other FC/APC

• The supercontinuum laser shall be delivered factory aligned to the filter system

• Must include software and driver library for programming the system through Matlab, python and Labview.

• 12 months warranty ☐ See attached document for detailed specifications

Shipping & Delivery ☐ N/A

Delivery information by item ☐ Phased delivery is acceptable ☒ Software on USB / disk required ☐ Software electronic delivery acceptable Email address for software delivery

Installation ☒ N/A

Installation requirements ☐ Site visit recommended

Inspection and Acceptance ☐ N/A

Inspection requirements ☒ Government acceptance expected to take longer than 7 days

Due to Covid restrictions it is expected that testing and acceptance will take longer than 7 days – the expectation is at least one month from date of delivery.

Warranty ☐ N/A

Base Manufacturer Warranty is acceptable If you require an Extended Manufacturer Warranty, describe the warranty requirements.

Period Length:Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Training ☒ N/A

Training requirements Enter related information here

Maintenance Routine maintenance may be required outside the warranty period and it is expected the

Statement of Work: Filtered Supercontinuum Laser System 3

☒ N/A manufacturer be able to provide this support at our cost.

☐See attached document for detailed maintenance specifications Period Length: Ex. month, 6 month, year etc.

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Repair ☐ N/A

Optional Line Item: Repair work above and beyond routine maintenance actions and outside of warranty.

Describe your repair requirements.

Period Length: Ex. month, 6 month, year etc.

Enter related information here

☐ Option Period 1 ☐ Option Period 2 ☐ Option Period 3 ☐ Option Period 4

Government Furnished Material / Equipment ☒ N/A

List any government furnished material/equipment here

Enter related information here

Travel ☒ N/A

Describe any travel requirements Vendor: To the maximum extent possible, include as part of appropriate sections above (maintenance, repair, etc.).

Otherwise, it will be a separate line item, reimbursable per the Federal Travel Regulation.

Statement of Need