100_ton_Mobile_Chiller_Specifications_REVISED.pdf

Trailer Specification for a Mobile Chiller

Brand Name or Equal to: BigTex Trailers, model 25GN-40. The minimum specification of the BigTex model above are listed below.

It is required to have 16 inch tires and a non-adjustable axle. This should be a 40 foot long, kingpin trailer with a 102 inch width. The below specification is for the TRAILER ONLY. The below drawing illustrates how the trailer will be set up once it is received.

Figure 1, Trailer Specifications

25GN-40 8,750# 102" x 40' Tandem Dual Wheel Gooseneck (Straight)

AXLE (2) 12,000# Dual Wheel w/ Electric Brakes (Oil Bath)

JACK Dual Two Speed Landing Gear (Bolted On)

NECK 12" I-Beam, 19#

TIRE ST235/80 R-16 Load Range E Dual

FLOOR 2" Treated Pine or Douglas Fir

FRAME 12" I-Beam, 19#

WHEEL 16" x 6"; Black Dual Wheel 8 Bolt

FINISH

Superior Quality Finish is Applied for a Highly Decorative and

Protective Finish.

LIGHTS L.E.D. D.O.T. Stop, Tail, Turn & Clearance

COUPLER 2-5/16" Ball Adj. Square Crank Type

G.V.W.R. 25,900#

ELEC. PLUG 7-Way RV

HITCH TYPE Kingpin (No substitutions)

SIDE RAILS

8" Channel w/Rub Rail, Stake Pockets on 24" Centers, and Chain

Spools

SUSPENSION Heavy Duty 30,000# Adjustable

CROSSMEMBERS 3" Channel

FINISH (Prep) Steel is Cleaned to Ensure a Professional Smooth Finish.

SAFETY CHAINS 3/8" Grd. 70 w/Safety Latch Hook (2 each)

G.A.W.R. (Ea.

Axle) 12,000#

CHILLER REQUIREMENTS

FOR ABOVE MOBILE TRAILER

The Chiller must meet the following minimum requirements:

100 Ton Trane Chiller / 346 MAX GPM, 240 GPM nominal—or equivalent o 460V/60 Hz/3 phase

Integral Hydronic Piping Package o 4” or 6” Sized Schedule 40 Welded Steel piping o (2) 20 HP Armstrong Pump with lead/lag control

Each 346 Max GPM / 110 feet head / Glycol o (2) TR150 VFD for Balancing o Isolation Valves o Triple Duty Valve o Suction Diffuser w/ Strainer o Pressure and Temperature Gauges

Portable Unit Modification o Camlock Electrical Connectors o Set of flexible hoses w/ hose reels (two, 100’ hoses) compatible with above chiller

These can be placed in boxes if sufficiently sized reels are not available o Mounted to Trailer (bolted)

Standalone Controls

Multi-tap Transformer to step voltage up from facilities which only have 208V/60 Hz/3 phase power supplies

Freight to Kirtland AFB Building 20683

2050 Wyoming Blvd, SE

Bldg. 20683

Kirtland AFB, NM 87117

Unit is run tested prior to shipment and guaranteed to be fully operational upon delivery

The Chiller package will be mounted on the Brand Name or Equal to: Big Tex Trailer, model 25GN-40 as indicated in Figure 1, previous page. On the following page are photographs of one of our mobile chillers for reference.

Figure 2, Mobile Chiller

Figure 3, Kingpin Coupling

Figure 4, Mobile Chiller Hauler