NX Software Combined Requirements Document Revision 1.docx

FA5000-09-R-0033

NX SOFTWARE

Statement of Work For 704th Test Group

1.0 Purpose

1.1 General. This requirement is to obtain license and maintenance agreements for Siemens NX software to be utilized by the 586th Flight Test Squadron (586 FLTS) and 846th Test Squadron (846 TS) engineers in the 704th Test Group (704 TG) at Holloman AFB as listed in section 2.1. The 704 TG is looking to purchase base year with two Option Periods of Performance.

1.2 Coverage Period. The coverage periods for the items in section 2.1 are as follows:

a. Base Year: 12 Month Period

b. Option Year 1: 12 Month Period

c. Option Year 2: 12 Month Period

1.3 Background. Due to the 586 FLTS's unique rapid experimentation and prototype test capabilities, the Siemen’s NX product suite is the center of every project design produced for any aircraft modifications including the T-38Cs, C-12J (TG owned), C-12D (Army owned), and C-12F (customer owned). These aircraft and their unique components support customer and 704 TG’s sister squadrons (Holloman High Speed Test Track (HHSTT) Complex, Central Inertial and GPS Test Facility, and the National Radar Cross Section Test Facility) test articles. In addition to the 586 FLTS, the T-38 System Program office and the HHSTT utilize this platform for all of their operations (i.e. design, maintenance, manufacturing, etc.). The legacy of the program allows engineers to view and work from previous and future designs. The software has a unique blend of 2D and 3D modeling, incorporates very fine meshing capabilities to carry out accurate and precise calculations for Finite Element Analysis.

The 846 TS has been using this software for over 20 years and it is the backbone of the engineering department's modeling and simulation design work with over 20,000 drawings and countless parts created using this software. The software used in-house is locked to a server in the organization. The primary reason for the addition of these standalone license packages for the 846 TS is to allow the engineers the ability to work off the network in a standalone environment. To make this work seamlessly the software needs to be the same type and version as the existing software.

2.0 Scope

2.1 The Contractor shall deliver the following licenses and maintenance agreements:

586 FLTS

846 TS

2.2 Firmware and Software Updates/Upgrades: This includes upgrades and software releases for the systems identified in section 1.2. The Contractor shall provide these updates via a downloaded format or disc.

This access is provided 24 hours a day, 7 days a week for the coverage periods in section 1.2.

3.0 Milestones

The Contractor will provide the required licenses and agreements no later than 15 days ARO.

4.0 Deliverables

The contractor shall deliver all software and documentation to:

586 FLTS: Attn: Gerardo Sanchez at 1644 Vandergrift road, building 1260, Holloman Air Force Base, New Mexico 88330.

846 TS: Attn: Malden J. Travis at 1531 Test Track Road, Building 1174, Holloman Air Force Base, New Mexico 88330.

Page - 3 - of 3

- 1 -