Expansion_Joint_RFI_7.30.2019.docx

DOCX document 12 KB Posted

Attached to
Expansion Joints Federal contract opportunity
Solicitation number
FA9101-19-Q-0056
Issued by
Department of the Air Force Materiel Command Test Center

About this file

From the source

See attached

View the file

Other files for this federal contract opportunity

Other files attached to Expansion Joints, newest first.
File Type Posted
Expansion_Joint_RFI_7.25.2019.docx DOCX document
Expansion_Joint_RFI_7.24.2019.docx DOCX document
Expansion_Joint_RFI_7.22.2019.docx DOCX document
Phase_5_Specification_Spreadsheet.xlsx XLSX spreadsheet
FA9101-19-Q-0056_Phase_5_Expansion_Joints__Combined_Synopsis..docx DOCX document
Phase_5_Expansion_Joints-_Specs.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Answer to RFI- 7.30.2019: Expansion Joints Question What is the allowable minimum thickness of the pipe?

Answer The pipe thickness can be thinner than the ASME B31.3 calculated value if it is reinforced properly; however, we wanted to set a lower limit on what was acceptable. If there is no significant reinforcement, then the value of B31.3 min pipe calc would be required.

File details come from the government source that posted it.