2_Rqmt_Doc,_Lifting_Lug_Components.pdf

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

Requirements Document

Large Target Lifting Lug Components For

846th Test Squadron

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

1.0 PURPOSE

The 846th Test Squadron, Holloman High Speed Test Track (HHSTT), is utilizing larger targets to support customer tests in the future. These larger targets will be designed and fabricated onsite; however lifting lugs are required on these larger targets to move them around and into place to test against them.

New lifting lugs have been designed and planned to be used on these targets. Lifting lugs will be required early in the process of the target fabrication. Air Force drawings shall be provided of the lug designs.

2.0 SCOPE

The Contractor shall provide target lifting lug components for four (4) lugs that meet the following requirements:

Lug components shall be fabricated in accordance with drawings X20172263, X20172264, and

X20172265 to meet the Lug Assembly under Drawing X20172262.

Lug components must be fabricated out of 4130 normalized steel; no substitute material will be accepted.

3.0 MILESTONES

Lifting lugs components shall be delivered no later than 10 weeks after contract award.

4.0 DELIVERABLES

Components for four (4) lifting lugs that meets the minimum requirements listed in section 2.0.

5.0 GENERAL CONSIDERATIONS

5.1 PLACE OF PERFORMANCE

The lifting lug components shall be fabricated at the contractor facilities and delivered FOB Destination to HHSTT Machine Shop, Bldg. 1173, Holloman AFB, NM.