Questions_and_Answers_Set_2.pdf
PDF 102 KB Posted
- Attached to
- Storage Aid System for Elmendorf AFB, AK Federal contract opportunity
- Solicitation number
- FA8604-18-R-8112
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Questions_and_Answers_Set_3.pdf | ||
| Request_for_Proposal_revision_0003.pdf | ||
| FA8604-18-R-8112_RFP_Amendment_0002_Extension.pdf | ||
| PEL622-02_(REV1).dwg | DWG drawing | |
| RFP_questions_and_answers_-_set_1_(rev_2).pdf | ||
| PEL622-03_(REV1).dwg | DWG drawing | |
| PEL622-01.dwg | DWG drawing | |
| RFP_questions_and_answers_-_set_1.pdf | ||
| Request_for_Proposal_Revision_001.pdf | ||
| Proposal_Checklist.Pricing_Summary_Sheet.docx | DOCX document | |
| PEL622-02.dwg | DWG drawing | |
| PEL622-03.dwg | DWG drawing | |
| PEL622-01.dwg | DWG drawing | |
| Request_for_Proposal.pdf |
Show all 14
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions Set 2 – 24 Sept 18
Question 1: In regard to the mobile storage system proposed for the vault- 30”w x 48”d – closed, clip type shelving with 1000# / shelf capacity is not an industry standard, and I can find no one that has tooling to make it as spec’d. Will you accept a different type of shelving for the mobile system such as rivet?
Answer: The capacity of the bin shelving and mobile aisle system have been updated to 400 pounds/shelf and 1000 pounds per carriage foot. These updates should alleviate any of the manufacturer concerns.
Question 2: In regard to the mobile storage system proposed for the vault - Spec with raised floor would not be recommended for use with an electric lift with a 1000# load on it (based on the shelf spec). Raised floors are designed for foot traffic or at the most a light duty push cart with a light load. We would recommend imbedding the rails into the (assumed) concrete floor so that the concrete floor would be supporting the lift & load – not a raised floor.
Answer: Raised floor is required due to location of mobile aisle, imbedded rails are not feasible in a weapons vault.
Question 3: In regard to the mobile storage system proposed for the vault - Mobile system industry standard carriages are designed for 1000# per carriage foot. The suggested load requirement per these specs would require a minimum of 1600# per carriage foot. As the spec is written we do not believe there is a manufacturer that can meet this spec. including Spacesaver and PER Spacesaver for the requested type of system.
Answer: The capacity of the mobile aisle has been updated to 1000 pounds per square foot.
Question 4: In regard to the mobile storage system proposed for the vault - RE: the lock – design as spec’s does not fully lock the system – there will be (1) carriage face of shelving open at all times.
Answer: The stationary cabinet shall be a movable single sided carriage to allow the entire system to be closed and locked. AF Drawing PEL622-03 has been updated to reflect this change.
Question 5: I would like to ask if the engineer would accept 60” wide x 48” deep shelving on the mobile system, rather than 30” wide x 48” deep. Same capacity – same amount of storage.
Answer: This is acceptable.
File details come from the government source that posted it.