876064_EI.doc

REV:

ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

XXXXXXXXXXXXXXXX

2. PART NUMBER:

3. NATIONAL STOCK NUMBER:

1234-12-123-1234FG

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC, WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

TRANSPARENCY F-16

2. PART NUMBER:

5006550-03

3. NATIONAL STOCK NUMBER:

1560-01-497-5956WF

4. Unique identification (UID) shall be applied to each part per MIL-STD-130. The UID shall be a machine-readable information

(MRI) mark. The MRI shall be accompanied by a Human-Readable Information (HRI) marking which is limited to 16

Alphanumeric characters including the vendor cage (FSCM) of the contractor named on the contract, date of manufacture in

The format MMYY, and a unique 4 digit number starting with 0001 in a numerical order of manufacture. The HRI shall appear

As “SN 8175501090001”. The height of each alphanumeric character shall be a maximum of .125 inches.

PREPARED BY:

RICHARD TILTON

OFFICE SYMBOL:

GBMAF

DATE:

20080411

PREPARED BY:

Tim Lucas

OFFICE SYMBOL:

416 SCMS/GUMAA

DATE:

20120222

HILL AFB FORM 462 Page 1 of 1