SOW.pdf

STATEMENT OF WORK (SOW)

FOR

ELOP HUD TPS PRODUCTION

7/24/2018

Revision 06

Prepared By

516 SMXS/MXDPE

ATE Software Maintenance Squadron Hill Air Force Base, UT 84056

DISTRIBUTION D: Distribution authorized to department of defense and U.S. DOD contractors only:

administrative or operational use. 2015 April 06. Refer other requests for this document to 516 SMXS/MXDEE, Hill AFB, UT 84056.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

DISCLOSURE NOTICE: This document will not be disclosed to any person or organization outside of the organizations identified on the approval sheet of this SOW.

APPROVAL SHEET

7/24/2018

X Kent Davis, TPM

516 SMXS/MXDPE

Signed by: DAVIS.KENT.L.1273599084

TABLE OF CONTENTS

1 PURPOSE AND SCOPE

2 REQUIREMENTS

2.1 Technical Requirements

2.1.1 Part Numbers and Quantities to be produced

2.1.2 Period of Performance

2.1.3 Delivery Address:

3 ASSUMPTIONS AND GROUND RULES

3.1 Assumptions

3.2 Ground Rules

4 ACRONYMS

DOCUMENT CHANGE HISTORY

Revision Date Point of Contact Change Number: Title: Description

00 1/12/2017 Charlotte Beeman Original

01 7/21/2017 Kent Davis Update for contracting

02 10/30/2017 Kent Davis/May-Lin

Robbins

Removed PAL Cable P/N 32-01426-01

03 5/18/2018 Kent Davis Updated Line item 2 part number and quantity. Added notes for all line items about substitute part allowed. Added email address for engineer for access to drawings.

04 6/20/2018 Kent Davis Changed 3.1.1 to obtain drawings via

JEDMICS.

05 7/12/2018 Kent Davis Incorportate requested changes by PZ.

Change quantity on line item 2 back to the original value of 1.

06 7/24/2018 Kent Davis Modified notes for line item 1 in table 1.

1 PURPOSE AND SCOPE

The purpose of this Statement of Work (SOW) is to describe the effort required by the

Contractor/Supplier for production of items listed in the parts list which make up the ELOP HUD

TPS.

2 REQUIREMENTS

2.1 Technical Requirements

2.1.1 Part Numbers and Quantities to be produced.

The following parts list shall be produced and assembled by the Supplier for the quantity shown according to the drawing number.

Table 1

Part List

Line

Item

Part Number Description Qty. Notes: Drawing

Number

1 201126311-30 ITA Set, ELOP 1 Includes production of all subassemblies.

201126311

2 201226613-10 Image Sensor

Mounting Hardware

1 Spec DWG 201226613 201226613

3 201306707-10 Firmware Cable 1 Spec DWG 201306707 201306707

4 201610028-10 Translator Fixture Kit 6 This is in addition to the one included with P/N: 201126311-30.

Assembly will be completed by

Government (516 SMXS/MXDPE)

201610028

5 16U4722-7 Housing Assembly 1 This is in addition to the one that is included in 201126311-30. 6061

T6 Aluminum is allowed in placement of 2124 T851

Aluminum.

16U4722

6 16U4722-11 Cover 1 This is in addition to the one that is included in 201126311-30. 6061

T6 Aluminum is allowed in placement of 2124 T851

Aluminum.

16U4722

2.1.2 Inspection and Acceptance Terms

All Supplies/services will be inspected/accepted at government Destination (516

SMXS/MXDPE). No QA will be required by the vendor prior to shipment.

2.1.3 Period of Performance

Line Items should be delivered within 6 months of award.

2.1.4 Place of Performance

The place of performance will take place at contractor’s facility.

2.1.5 Government Furnished Property (GFP)

2.1.5.1 Connector Retainer Standoff P/N 16VA189-3A, used in drawing number 201126312, Interface Test Adapter Assembly.

2.1.5.2 Flexible Circuit P/N 16U4492-801, used in drawing number 201126312, Interface Test

Adapter Assembly.

2.1.6 Delivery Address:

C/O: Kent Davis

516 SMXS/MXDPE

Bldg. 1515 RM 141 – F2DCCE

6137 Wardleigh Rd.

Hill AFB, Utah 84056

3 ASSUMPTIONS AND GROUND RULES

3.1 Assumptions

3.1.1 The drawings are obtainable from Government via JEDMICS.

4 ACRONYMS

ATE Automatic Test Equipment

ECP Engineering Change Proposal

EDP Engineering Data Package

ELOP Electro Optical

ESD Electrostatic Discharge

GFP Government Furnished Property

HUD Heads Up Display

ITA Interface Test Adapter

JEDMICS Joint Engineering Data Management and Information Control System

LRU Line Replaceable Unit

OO-ALC Ogden Air Logistics Complex

PCO Procuring Contracting Officer

PMR Program Management Review

SOW Statement of Work

TIM Technical Interchange Meeting

TPS Test Program Set

TRD Test Requirements Document

UUT Unit Under Test