ELOP_Questions_answers_1.docx

ELOP Questions/Answers #1

During the course of the posted RFP, the following questions were asked. Answers are in blue.

1. Please provide a schematic for Item 6, Adapter Assembly, Interface Test, of the Part List for Drawing 2011-26311 For item 6 of DWG 2011-26311 refer to sub drawing 2011-26312 sheet 4 for wiring schematic (included in the TDP in folder ITA Kit/ITA). The schematics for the PCBs parts in the ITA (DWG 2011-26312 find numbers 28 and 30) are included in the sub drawings 2011-26314 and 2011-26315 and associated Geber file respectively contained in the TDP.

1. For Drawing 30-01426-01 Cable, Programming Adapter, please provide the “Length” dimension Drawing 30-01426-01 is not required according to the SOW. I did not intend to send those drawings but forgot to remove them from the TDP before sending.

1. For the end item Interface Test Adapter (ITA), we need

2. Wire Run List refer to DWG 2011-26312 sheet 4 for wiring diagram.

2. Component Location Diagram refer to DWG 2011-26312 sheet 2 and 3 for component location.

1. Does the ITA have a Virginia Panel Interface Frame? If so, please provide:

3. Part Number and Quantity of all items

3. “Find Number” of all items

3. Drawing/Illustrated Parts Breakdown (IPB)

Yes, the ITA has a Virginia Panel frame P/N 4101-01254 (see DWG 2011-26312 find number 3).

a.The frame, though it has several pieces, is one assembly part number (P/N 4101-01254) ordered from the vendor.

b. No additional find numbers.

c. DWG 2011-26312 sheet 2 and 3 show frame in relation to the rest of the ITA.