FA822417R0056-_Mirrors_Clarification.pdf
PDF 185 KB Posted
- Attached to
- Mirrors for HEDS Dome Federal contract opportunity
- Solicitation number
- FA8224-17-R-0056
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Drawings.pdf | ||
| Purchase_Specification-_mirrors.pdf | ||
| Clause_List_Final.pdf | ||
| Drawings.doc | DOC document | |
| Purchase_Specification-_mirrors.doc | DOC document | |
| Clause_List_Final.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Subject: FA8224-17-R-0056
Clarification
Below are response to questions regarding subject solicitation.
Black backing required - Spray Paint / Screen Printed?
Government Response : As Long as the back is Black and opaque the process does not matter to us.
Dimensional tolerances required - We would prefer to have +/- .125"
Government Response: Yes, it is okay to allow for this much tolerance, no problem.
Edge finish - Is a cut edge OK or do you need the edges safety seamed?
Government Response: The cut edge is OK, we tape the edges before putting into a aluminum frame.
One mirror, out of the 9 listed, is 3mm thick. We do not stock 3mm in a size that is larger than 32" x 50" so we would need to deviate to 6mm. This is for item 7 on your inquiry. Is 6mm OK?
Government Response: All of the mirrors should be the same thickness if one was wrong on the specification it was in error, make all mirrors on order the same thickness of 1/4 inch or 6mm.
What is the optical density number?
Government Response: This was not in our specification, this should answer this.
An average reflectance of 88% or greater in the 450 nm - 700 nm visible light band, approximately visually neutral in color balance.
File details come from the government source that posted it. Updated .