QALI.pdf
PDF 98 KB Posted
- Attached to
- Reefing Line Cutter Federal contract opportunity
- Solicitation number
- FA821320R3003
About this file
This document contains a quality assurance letter of instruction and planning requirements for a federal contract to produce reefing line cutters. The contractor must follow 17 defined inspection points for the manufacturing and testing of the reefing line cutters. Inspection points include verifying explosive weight and leak testing according to approved test plans. The contractor must also correctly label radiographic films, select samples for lot acceptance testing, and calibrate all test equipment used. Additional requirements include reviewing ammunition data cards, ensuring correct paperwork for packaging and shipping, and notifying the project engineer of any additional DCMA requirements. The related federal contract opportunity is a solicitation from the Department of the Air Force to provide reefing line cutters identified as national stock numbers 1377013322379ES and 1377013339143ES for the pricing of $0.00 each.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| REPSHIP.doc | DOC document | |
| EDL 01-332-2379.pdf | ||
| SPI F01-052-8209.pdf | ||
| Packaging SOW.pdf | ||
| Packaging.pdf | ||
| CADPAD Item Marking Instruction.pdf | ||
| CDRLSFY20.pdf | ||
| AIR SPEC.pdf | ||
| JFQR.pdf | ||
| EDL 01-333-9143.pdf | ||
| ADCSOW.pdf | ||
| FA821320R3003.pdf | ||
| BidSets.pdf |
Show all 13
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Contractor Name CAGE code
DCMA QAR Reviewer
Date Review Completed
Date Issued to Contractor
PR No. FD2020-
Date Contract Awarded
Final Delivery Date (FDD)
Program Name
DODIC
Part Number
The contractor is required to impose the listed below DCMA Inspection Points into the appropriate Work Orders.
All Work Orders pertaining to CRITICAL FLIGHT ITEMS must be identified on folders.
Mandatory - M: Stamp and/ or Signature on original documentation (i.e., Mfg. Planning, ATP, FAT Report, etc.)
Witness - W: GSI required to attend, may reduce level of effort after 50% of production lots found acceptable
Verification - V: Stamp and/or Signature required unless noted otherwise (may be done by written verification)
Monitor - R: Will monitor testing, may reduce to verification
Notify - N: By phone or email
Additional requirements: (DCMA reserves the right to impose additional inspection points as deemed necessary.)
Prepared by:
Date
Concurrence Signature by QAR/DCMA:
QAR/DCMA
THIS PLANNING SHEET WILL BE UPDATED IF NECESSARY.
QUALITY ASSURANCE LETTER OF INSTRUCTION
Planning Requirements
COMMENTS
NOTICE
Engineer
Date
Sheet1
| Contract No: 20-50039, 20-50040 |
| Date Contract Awarded: |
| Final Delivery Date FDD: |
| Program Name: ACES II Cutters |
| DODIC: MD90 and MD91 |
| undefined: V |
| undefined_2: V |
| undefined_3: V |
| undefined_4: M |
| undefined_5: W |
| undefined_6: V |
| undefined_7: V |
| undefined_8: V |
| undefined_9: N |
| undefined_10: |
| undefined_11: |
| undefined_12: |
| Text19: Roberts Research Laboratories |
| Text20: 60880 |
| Text21: |
| Text22: |
| Text23: |
| Text24: 1.Inspection |
| Text25: 2. Leak Test |
| Text26: 3. X-Ray/N-Ray |
| Text27: 4. LAT Sample Selection |
| Text28: 5. LAT |
| Text29: 6. Preparation for Shipment |
| Text30: 7. AMMO Data Card Review |
| Text31: 8. Shippers (DD250, DD1149, Reports) |
| Text32: 9. Additional Requirements |
| Text33: |
| Text34: |
| Text35: |
| Text36: 1. Verify that the Explosive Weight is identified and meets drawing and hazard classification requirements. |
2. Verify gross/fine leak checks are performed per ATP requirements
3. Ensure film labeling correct. Ensure radiographic film readable / well-defined. DCMA not required to interpret film.
4. Randomly select LAT units per latest government approved ATP.
5. Prior to LAT ensure proper calibration and validation of all test equipment. Testing should occur in accordance with latest government approved ATP.
6. Ensure Paperwork is correct.
7. Verify all energetic materials: list original manufacturer, original lot no., and latest certification/recertification date < 24 months.
8. Ensure Paperwork is correct. Verify Packaging, Packing, Preservation & Marking (PPP&M)
9. Notify and obtain approval from the Project Engineer for any additional requirements imposed by DCMA.
| 2018-05-04T07:50:39-0600 | |
| HANCEY.ALLEN.R.1386816111 |
| Text46: 29 April 2019 |
| Text49: |
| Type name_1: |
| Type name_4: |
| Part Number: |
| Noun: C1-1.15 and C1-4.0 |
File details come from the government source that posted it. Updated .