FORM158.pdf

PACKAGING REQUIREMENTS

AFMC FORM 158, 20150424

PR, MIPR, OR DOCUMENT 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:

SEE REVERSE FOR SPECIFIC INSTRUCTIONS:

1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.

ITEM ID

QUP

MIL-STD-2073-1

PRES PACK

(X) (A/B)

COMMERCIAL

ASTM D3951

PACKPRES

(X) (X)

MIL-STD-129

MARKING

(X)

SPECIAL

PACKAGING

INSTRUCTION

NUMBER

2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)

A. ENGINEERED OR SPECIALIZED CONTAINERS (CDRS)

B. PACKAGING OF HAZARDOUS MATERIALS

C. PACKAGING DATA (Coded and/or Special Packaging Instructions)

D. MARKING OF WARRANTED ITEMS, ITEM NAME(S)

E. WOOD PACKAGING MATERIAL ISPM 15

4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1

ORGANIZATION PACKAGING SPECIALIST (Typed Name)

QUANTITY

QUP ICQ

PRES

METH

C D

PRES

MTL

WRAP

MTL

CUSH

DUNN

C T

UNIT

CONT

INT

CONT

U C L

SPEC

MKG

O P I

UNIT PACK WEIGHT UNIT PACK SIZE UNIT PACK CUBE

10 LENGTH 1000THWHOLE CUBE10 WIDTH 10 DEPTH 10

PACKAGING SPECIALIST SIGNATURE DATE

PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

AFMC FORM 158, 20150424 Page 2 of 2 Pages

ADDITIONAL INFORMATION

PACKAGING REQUIREMENTS

AFMC FORM 158, 20150424

3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:

SEE REVERSE FOR SPECIFIC INSTRUCTIONS:

1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.

ITEM ID

QUP

MIL-STD-2073-1

PRES

PACK

(X) (A/B)

COMMERCIAL ASTM D3951

PACK

PRES

(X) (X)

MIL-STD-129

MARKING

(X)

SPECIAL PACKAGING INSTRUCTION NUMBER

4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1

QUANTITY

QUP

ICQ

PRES METH

C D

PRES MTL

WRAP MTL

CUSH DUNN

C T

UNIT CONT

INT CONT

U C L

SPEC MKG

O P I

UNIT PACK WEIGHT

UNIT PACK SIZE

UNIT PACK CUBE

LENGTH

1000TH

WHOLE CUBE

WIDTH

DEPTH

PREVIOUS EDITIONS ARE OBSOLETE

Page 1 of 2 Pages

AFMC FORM 158, 20150424

Page 2 of 2 Pages 11.0.1.20130826.2.901444.899636

**DO NOT PACKAGE DIFFRENT NATIONAL STOCK NUMBERS (NSN), IN THE SAME CONTAINER** INTERNATIONAL STANDARDS for PHYTOSANITARY MEASURES (ISPM NO. 15) REQUIREMENTS ARE SHOWN ON THE BACK OF THIS

DOCUMENT.

AFMCI24-201, 3.10 MATERIAL SAFETY DATA SHEET IS REQUIRED & POP Testing, Packaging, and marking

ISPM:

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON SOLID WOOD PACKING MATERIAL (SWPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF SOLID WOOD PACKING MATERIAL (SWPM) SHALL BE CONSTRUCTED FROM HEAT-TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE

DOCUMENTATION, SEE “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

(ISPM) NO. 15.” THIS DOCUMENT CAN BE FOUND AT www.ippc.int.