1457540_ATTACH_FA_CDRL.pdf

Form 1423, OCT 2001 Computer Generated Date: 3/14/2012, Time: 1:19 PM

CONTRACT DATA REQUIREMENTS LIST Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 440 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please NO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM

NO.

B. EXHIBIT

A

C. CATEGORY

TDP 0 TM 0 OTHER

D. SYSTEM/ITEM

First Article

E. CONTRACT/PR NO.

F. CONTRACTOR

G. PREPARED BY

Lori Grygier

H. DATE

24 JUN 2013

I. APPROVED BY

John Hamblin

J. DATE

24 JUN 2013

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

TEST/INSPECTION REPORTS

3. SUBTITLE

GOVERNMENT TESTING

4. AUTHORITY (Data Acquisition Document No.)

DI-NDTI-80809B/T

5. CONTRACT REFERENCE 6. REQUIRING OFFICE

417 SCMS/CL

7. DD 250 REQ

Y

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

1TIME

12. DATE OF FIRST

SUBMISSION

00 0000

14. DISTRIBUTION

8. APP CODE 11. AS OF DATE

00 0000

DATE OF

SUBSEQUENT

SUBMISSION

00 0000

a. ADDRESSEE b. COPIES

Ship To Code Draft

Final Reg

Final Rep

15. TOTAL

AFMC Form 260

SEE BELOW

16. REMARKS

ADDRESSEE:

(Refer to AFMC Form 260 for test asset and report delivery addresses)

1. BLOCK 4: Contractor format acceptable. Paragraph 10.2.3.3 of DI-NDTI-80809B is clarified as follows:

a. All dimensions and tolerances specified on the manufacturing data shall be listed in one column with the actual corresponding reading obtained from the inspection of the part listed in another column.

Form 1423, OCT 2001 Computer Generated Date: 3/14/2012, Time: 1:19 PM

b. Materials utilized in the manufacture of "First Article" item shall be identified and certified along with a copy of material purchase requests as conforming to applicable data requirements.

c. Material processing, including finish requirements (plating, heat treatment, welding, inspecting, anodize, painting, etc.) utilized in the manufacture of "First Article" item shall be identified and certified as conforming to applicable requirements. A copy of the purchase order certifying the process accomplished at other than contractor facility shall be included.

d. Other requirements as called out on Engineering Data Requirements (OO-ALC FORM 462).

2. BLOCK 9 DISTRIBUTION STATEMENT B: Distribution authorized to U.S. Government Agencies only. Reason: Test and Evaluation. Date of determination: 28 June 2005. Other Requests for this document shall be referred to:

417 SCMS.

3. BLOCKS 10, 11, 12, 13: Report to assist in "First Article" testing by the Air Force shall be submitted concurrently with the "First Article" item.

FOB DESTINATION

17. PRICE GROUP 18. ESTIMATED TOTAL PRICE