NEW-Item_Description.docx

17E082 Dual-Hoist Overhead Crane 3-Ton, Dual-Hoist, Underhung Overhead Crane Kit Specifications:

1. (2ea) Wright “Work-Rated” Wire Rope Electric Hoist P/N: X2W03D020-15M2D1

a. 3 Ton

b. 20’ Lift

c. Lift Speeds: 15FPM VFD Controlled with Micro-Speed, with 2-4FPM fine travel

d. 32” Headroom

e. 2 part Double Reeving

f. 3/8” Wire Rope

g. Trolley Speed: 50 FPM with Micro-Speed, with 2-4 FPM fine travel

h. 3.33” Louden Supertrack Operating Flange

i. 3hp Hoist Motor

j. 1hp Trolley Motor

k. 3p, 460v, 60Hz Voltage

l. Nema 3R Enclosure

m. Safety Yellow paint

2. (1ea) Louden 3 Ton Capacity Single Girder Underhung Dual Drive Crane P/N: 585.6003

a. 20’ Span

b. 1’ Overhang with End stops Both Ends

c. 22’ Overall Length

d. Super track Bridge Girder:

i. Full Depth

ii. 8 Wheel

iii. 20,000 pound Capacity End Trucks

iv. 6’ Wheelbase

v. Rubber Bumpers

e. Dual Drives:

i. (2ea) 1/2hp

ii. 75 Feet Per Minute

iii. Steel Wheel Drive with Manual Release

iv. Inverter Duty Motors

f. Rigid Track Festoon

g. G+ Series 4 Inverter Control

h. Strobe Light and Horn

i. 3p 460v 60Hz

j. Safety Yellow Paint

k. HBC Radiomatic Micron T5 Transmitter

l. FST516 Receiver

3. (2ea) ACCO Louden 20’ long 3.33” Super track Girder and (2ea) ACCO Louden 32’ long 3.33” Super track Girder P/N: 604.1846

4. (2ea) ACCO Louden ¼” – ¼”, 5/16” – 5/16” Web Splice Assembly P/N: 607.5011

5. (4ea) ACCO Louden Wheel Type End Stop P/N: 607.5030