tech_eval_criteria.xlsx
XLSX spreadsheet 30 KB Posted
- Attached to
- Overhead Fall Protection Federal contract opportunity
- Solicitation number
- FA8126-16-Q-0092
About this file
Technical Evaluation Criteria
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Tinker_AFB_questions_FA8126-16-Q-0092.docx | DOCX document | |
| B3102_CIP_-__SOW_B3102_Fall_Protection_20160209.pdf | ||
| SOW_B3102_Fall_Protection_1207.pdf | ||
| FA8126-16-Q-0092.doc | DOC document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet 1 (Main) DESIGN-BUILD FALL PROTECTION SYSTEM (B3102) - Technical Evaluation Criteria Checklist
LE, VU H GS-07 USAF AFMC 76 AMXG/QPP: LE, VU H GS-07 USAF AFMC 76 AMXG/QPP:
Adam P. Nicholas Contracting Officer Maintenance Contracting AMXG & CMXG Support
AFSC/PZIMA
Tinker Air Force Base 405-739-5194 The overhead fall protection systems must meet the following requirements to be technically acceptable: Meets Requirement?
| 1 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with designing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) by providing records of at least three (3) past projects in the last ten (10) years. | Yes o / No o |
| 2 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with fabrication of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) by providing records of at least three (3) past projects in the last ten (10) years. | Yes o / No o |
| 3 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with installing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) by providing records of at least three (3) past projects in the last ten (10) years. | Yes o / No o |
| 4 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with testing/certification of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) by providing records of at least three (3) past projects in the last ten (10) years. | Yes o / No o |
| 5 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with applications of industrial safety and fall protection by providing records of at least three (3) past projects in the last ten (10) years. | Yes o / No o |
| 6 | Contractor shall provide evidence of being qualified for designing of overhead fall protection system(s) with a minimum of ten (10) years of experience designing fall protection systems | Yes o / No o |
| 7 | Contractor shall provide evidence of being qualified for fabrication and installation of overhead fall protection system(s) by having at least ten (10) years of experience with fabrication and installation of fall protection systems | Yes o / No o |
| 8 | Contractor shall provide evidence of being qualified for testing and certification of overhead fall protection system(s) by having a minimum of ten (10) years of experience with testing and certification of fall protection systems | Yes o / No o |
| 9 | Contractor shall provide proof of being a qualified person in industrial safety and fall protection as defined by OSHA/ANSI, and a minimum of ten (10) years of experience working with fall protection systems | Yes o / No o |
| 10 | Contractor shall provide proof of having a Professional Engineering (P.E.) License with a minimum of ten (5) years of experience in industry dealing with fall protection systems | Yes o / No o |
| 11 | Contractor shall provide conceptual drawings of a proposed overhead fall protection system(s) that will solve the constraints listed in SOW Section 3 | Yes o / No o |
| 12 | Contractor shall provide a technical proposal demonstrating how they will solve the constraints listed in SOW Section 3 | Yes o / No o |
| 13 | Contractor shall provide a test plan proposal demonstrating how they will test that the fall protection system conforms to OSHA and ANSI fall protection standards | Yes o / No o |
| 14 | The contractor shall provide a full warranty on the entire fall protection system, the fall protection components, tools, and workmanship with repairs on-site and a warranty period equal to standard industry practices | Yes o / No o |
| Last Update: | 1/28/16 | |
| 2:16:21 PM |
| Technical Evaluation Sheet |
| B3102 DESIGN-BUILD FALL PROTECTION SYSTEM |
| Reference: Statement of Work No: QPP-SOW-15-001JL |
Offeror: _______________________________________ _
Reviewer: Vu (John) Le - Project Engineer
Date of Review:
Archive 2 DESIGN-BUILD FALL PROTECTION SYSTEM (B3102) - Technical Evaluation Criteria Checklist
LE, VU H GS-07 USAF AFMC 76 AMXG/QPP: LE, VU H GS-07 USAF AFMC 76 AMXG/QPP:
Adam P. Nicholas Contracting Officer Maintenance Contracting AMXG & CMXG Support
AFSC/PZIMA
Tinker Air Force Base 405-739-5194
| The overhead fall protection systems must meet the following requirements to be technically acceptable: | Meets Requirement? | ||
| DRAFT | |||
| 1 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with designing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o | |
| 2 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with fabrication of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o | |
| 3 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with installing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o | |
| 4 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with testing/certification of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o | |
| 5 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with applications of industrial safety and fall protection | Yes o / No o | |
| 6 | Contractor shall provide evidence of being qualified for designing of overhead fall protection system(s) | Yes o / No o | |
| 7 | Contractor shall provide evidence of being qualified for fabrication of overhead fall protection system(s) | Yes o / No o | |
| 8 | Contractor shall provide evidence of being qualified for installation of overhead fall protection system(s) | Yes o / No o | |
| 9 | Contractor shall provide evidence of being qualified for testing and certification of overhead fall protection system(s) | Yes o / No o | |
| 10 | Contractor shall provide proof of being a registered Safety Engineer CA/MA | Yes o / No o | |
| 11 | Contractor shall provide proof of being a certified safety professional, CSP | Yes o / No o | |
| 12 | Contractor shall provide proof of having a Professional Engineer (P.E.) License | Yes o / No o | |
| 13 | Contractor shall provide proof of being a qualified person in industrial safety and fall protection as defined by OSHA and ANSI | Yes o / No o | |
| 14 | Contractor shall provide conceptual drawings of a proposed overhead fall protection system(s) that will solve the constraints listed in SOW Section 3 | Yes o / No o | Need reference |
| 15 | Contractor shall provide a technical proposal demonstrating how they will solve the constraints listed in SOW Section 3 | Yes o / No o | |
| 16 | Contractor shall provide a test plan proposal demonstrating how they will test that the fall protection system conforms to OSHA and ANSI fall protection standards | Yes o / No o | |
| 17 | The contractor shall provide a full warranty on the entire fall protection system, the fall protection components, tools, and workmanship with repairs on-site and a warranty period equal to standard industry practices | Yes o / No o | Adam said it's okay but just don't make it beyond the standard then it'll be an extended warranty |
| Last Update: | 1/28/16 | ||
| 2:16:21 PM |
| Technical Evaluation Sheet |
| B3102 DESIGN-BUILD FALL PROTECTION SYSTEM |
| Reference: Statement of Work No: QPP-SOW-15-001JL |
| 12-Nov-15 |
Offeror: _______________________________________ _
Reviewer: Vu (John) Le - Project Engineer
Date of Review: November 12, 2015
Archive DESIGN-BUILD FALL PROTECTION SYSTEM (B3102) - Technical Evaluation Criteria Checklist
LE, VU H GS-07 USAF AFMC 76 AMXG/QPP: LE, VU H GS-07 USAF AFMC 76 AMXG/QPP:
Adam P. Nicholas Contracting Officer Maintenance Contracting AMXG & CMXG Support
AFSC/PZIMA
Tinker Air Force Base 405-739-5194
| The overhead fall protection systems must meet the following requirements to be technically acceptable: | Meets Requirement? | ||
| DRAFT | |||
| 1 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with designing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o | |
| 2 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with fabrication of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o | |
| 3 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with installing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o | |
| 4 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with testing/certification of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o | |
| 5 | Contractor shall demonstrate and show evidence of extensive knowledge and past experience with applications of industrial safety and fall protection | Yes o / No o | |
| 6 | Contractor shall provide evidence of being qualified for designing of overhead fall protection system(s) | Yes o / No o | |
| 7 | Contractor shall provide evidence of being qualified for fabrication of overhead fall protection system(s) | Yes o / No o | |
| 8 | Contractor shall provide evidence of being qualified for installation of overhead fall protection system(s) | Yes o / No o | |
| 9 | Contractor shall provide evidence of being qualified for testing and certification of overhead fall protection system(s) | Yes o / No o | |
| 10 | Contractor shall provide proof of being a registered Safety Engineer CA/MA | Yes o / No o | |
| 11 | Contractor shall provide proof of being a certified safety professional, CSP | Yes o / No o | |
| 12 | Contractor shall provide proof of having a Professional Engineer (P.E.) License | Yes o / No o | |
| 13 | Contractor shall provide proof of being a Qualified Person in industrial safety and fall protection as defined by OSHA and ANSI | Yes o / No o | |
| 16 | Contractor shall provide conceptual drawings of a proposed overhead fall protection system(s) that will solve the constraints listed in SOW Section 3 | Yes o / No o | Need reference |
| 16 | Contractor shall provide a technical proposal of how they will solve each of the following constraints from the SOW: | ||
| 16 | a. (SOW 3.1) The contractor shall verify that the fall protection system shall not cross each other at intersections and not burden the user with frequent connect-disconnect-connect operations when moving from different areas on the aircraft. | Yes o / No o | |
| 16 | b. (SOW 3.2) The contractor shall verify that the fall protection system shall be of one elevation without needing a turntable and not have multiple levels of stacking involved. | Yes o / No o | |
| 16 | c. (SOW 3.3) The contractor shall verify that the fall protection system shall be installed so it does not become an obstacle or interfere with aircraft movement throughout the dock. | Yes o / No o | |
| 16 | d. (SOW 3.4) The contractor shall verify that if a bridge type fall protection system is used the bridge rails will need to track along with the workers. The bearings in the trolleys shall allow the bridge to track with the workers. | Yes o / No o | |
| 16 | e. (SOW 3.5) The contractor shall ensure and provide certification that the fall protection system is designed for the worst case scenario: i.e. maximum number of workers falling at the same time and the same place. | Yes o / No o | |
| 16 | f. (SOW 3.7) The contractor shall prepare final design documentations for installation of a turn-key system. | Yes o / No o | |
| 16 | g. (SOW 3.8) The contractor shall provide certification that design complies with applicable OSHA and ANSI fall protection standards. | Yes o / No o | |
| 16 | h. (SOW 3.9) The contractor shall verify that the fall protection system shall be able to provide fall protection that complies with OSHA and ANSI for workers performing maintenance on the wings, fuselage and horizontal stabilizers. | Yes o / No o | |
| 16 | i. (SOW 3.10) The contractor shall verify and have P.E. certification that Building 3102’s truss and structural members can handle a combination of the fall protection weight load, the weight of the workers working on the aircrafts, and two (2) times the maximum force from the fall of all the workers at the same time. | Yes o / No o | |
| 16 | j. (SOW 3.13) The fall protection system shall have complete fall protection for a total of twelve (12) workers working per aircraft. With each dock being able to hold two (2) aircrafts, each dock shall have a total of twenty-four (24) fall protections: |
Four (4) users on each wing for a total of eight (8) users on the wings of each aircraft type.
Two (2) users on the fuselage for a total of two (2) users on the fuselage for each aircraft type.
| Two (2) users on the empennage for a total of two (2) users on the empennage for each aircraft type | Yes o / No o | |||
| 14 | Contractor shall provide a test plan demonstrating that the fall protection system conforms to OSHA and ANSI fall protection standards | Yes o / No o | ||
| 15 | The contractor shall provide a full warranty on the entire fall protection system, the fall protection components, tools, and workmanship with repairs on-site with a warranty period equal to standard industry practices | Yes o / No o | Adam said it's okay but just don't make it beyond the standard then it'll be an extended warranty | |
| Last Update: | 11/13/15 | |||
| 3:30:34 PM | ||||
| Technical Evaluation Sheet | ||||
| B3102 DESIGN-BUILD FALL PROTECTION SYSTEM | ||||
| Reference: Statement of Work No: QPP-SOW-15-001JL | ||||
| 12-Nov-15 |
Offeror: _______________________________________ _
Reviewer: Vu (John) Le - Project Engineer
| Date of Review: November 12, 2015 | ||
| DESIGN-BUILD FALL PROTECTION SYSTEM (B3102) - Technical Evaluation Criteria Checklist | ||
| The overhead fall protection systems must meet the following requirements to be technically acceptable: | Meets Requirement? | |
| DRAFT | ||
| 1 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with designing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o |
| 2 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with fabrication of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o |
| 3 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with installing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o |
| 4 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with testing/certification of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o |
| 5 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with applications of industrial safety and fall protection | Yes o / No o |
| 6 | Contractor shall provide evidence of being qualified for designing of overhead fall protection system(s) | Yes o / No o |
| 7 | Contractor shall provide evidence of being qualified for fabrication of overhead fall protection system(s) | Yes o / No o |
| 8 | Contractor shall provide evidence of being qualified for installation of overhead fall protection system(s) | Yes o / No o |
| 9 | Contractor shall provide evidence of being qualified for testing and certification of overhead fall protection system(s) | Yes o / No o |
| 10 | Contractor shall provide proof of being a registered Safety Engineer CA/MA | Yes o / No o |
| 11 | Contractor shall provide proof of being a certifified safety professional, CSP | Yes o / No o |
| 12 | Contractor shall provide proof of having a Professional Engineer (P.E.) License | Yes o / No o |
| 13 | Contractor shall provide proof of being Qualified Person in industrial safety and fall protection as defined by OSHA and ANSI | Yes o / No o |
| 14 | Contractor shall provide provide a technical proposal of how they will solve all of the constraints in the SOW | Yes o / No o |
| 15 | Contractor shall provide conceptual drawings of a proposed overhead fall protection system(s) | Yes o / No o |
| 16 | Contractor shall provide proof be being able to do a site study | Yes o / No o |
| 17 | Contractor shall provide a test plan for how they will test that the fall protection system conforms to OSHA and ANSI fall protection standards | Yes o / No o |
| 18 | The contractor shall provide a full warranty on all fall protection system components, tools, and workmanship with repairs on-site. The warranty period equal to the standard industry practice for the entire fall protection system, components and tools. | Yes o / No o |
| 19 | Contractor shall provide provide a technical proposal of how they will solve all of the following constraints from the SOW: | |
| 19 | a. (3.1) The contractor shall verify that the fall protection system shall not cross each other at intersections and not burden the user with frequent connect-disconnect-connect operations when moving from different areas on the aircraft. | Yes o / No o |
| 19 | b. (3.2) The contractor shall verify that the fall protection system shall be of one elevation without needing a turntable and not have multiple levels of stacking involved. | Yes o / No o |
| 19 | c. (3.3) The contractor shall verify that the fall protection system shall be installed so it does not become an obstacle or interfere with aircraft movement throughout the dock. | Yes o / No o |
| 19 | d. (3.4) The contractor shall verify that if a bridge type fall protection system is used the bridge rails will need to track along with the workers. The bearings in the trolleys shall allow the bridge to track with the workers. | Yes o / No o |
| 19 | e. (3.5) The contractor shall ensure and provide certification that the fall protection system is designed for the worst case scenario: i.e. maximum number of workers falling at the same time and the same place. | Yes o / No o |
| 19 | f. (3.7) The contractor shall prepare final design documentations for installation of a turn-key system. | Yes o / No o |
| 19 | g. (3.8) The contractor shall provide P.E. certification that design complies with applicable OSHA and ANSI fall protection standards. | Yes o / No o |
| 19 | h. (3.9) The contractor shall verify that the fall protection system shall be able to provide fall protection that complies with OSHA and ANSI for workers performing maintenance on the wings, fuselage and horizontal stabilizers. | Yes o / No o |
| 19 | i. (3.10) The contractor shall verify and have P.E. certification that Building 3102’s truss and structural members can handle a combination of the fall protection weight load, the weight of the workers working on the aircrafts, and two (2) times the maximum force from the fall of all the workers at the same time. | Yes o / No o |
| 19 | j. (3.13) The fall protection system shall have complete fall protection for a total of twelve (12) workers working per aircraft. With each dock being able to hold two (2) aircrafts, each dock shall have a total of twenty-four (24) fall protection: | Yes o / No o |
| 19 | a. Four (4) users on each wing for a total of eight (8) users on the wings of each aircraft type. | Yes o / No o |
| 19 | b. Two (2) users on the fuselage for a total of two (2) users on the fuselage for each aircraft type. | Yes o / No o |
| 19 | c. Two (2) users on the empennage for a total of two (2) users on the empennage for each aircraft type. | Yes o / No o |
| 19 | k. (3.15) The contractor shall verify that fall protection system shall have a label that gives the maximum number of workers that are allowed to use the fall protection system at once. The fonts of the label shall be large enough so workers from a distance of 45 feet away are able to read it. | Yes o / No o |
| Last Update: | 1/28/16 | |
| 2:16:21 PM | ||
| Technical Evaluation Sheet | ||
| B3102 DESIGN-BUILD FALL PROTECTION SYSTEM | ||
| Reference: Statement of Work No: QPP-SOW-15-001JL | ||
| 12-Nov-15 |
| Offeror: _______________________________________ _ |
| Reviewer: Vu (John) Le - Project Engineer |
| Date of Review: November 12, 2015 |
| DESIGN-BUILD FALL PROTECTION SYSTEM (B3102) - Technical Evaluation Criteria Checklist | ||
| The overhead fall protection systems must meet the following requirements to be technically acceptable: | Meets Requirement? | |
| DRAFT | ||
| 1 | Contractor shall provide evidence of being certified to design, fabricate, install, and testing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o |
| 2 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with designing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o |
| 3 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with installing of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o |
| 4 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with testing/certification of overhead fall protection system(s) for government facilities to be used for work on military aircraft(s) | Yes o / No o |
| 5 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with applications of industrial safety and fall protection | Yes o / No o |
| 6 | Contractor shall provide evidence of being qualified for design work of overhead fall protection system(s) | Yes o / No o |
| 7 | Contractor shall provide evidence of being qualified for fabrication of overhead fall protection system(s) | Yes o / No o |
| 8 | Contractor shall provide evidence of being qualified for installation of overhead fall protection system(s) | Yes o / No o |
| 9 | Contractor shall provide evidence of being qualified for testing and certification of overhead fall protection system(s) | Yes o / No o |
| 10 | Contractor shall provide proof of being a registered Safety Engineer CA/MA | Yes o / No o |
| 11 | Contractor shall provide proof of being a certifified safety professional, CSP | Yes o / No o |
| 12 | Contractor shall provide proof of having a Professional Engineer (P.E.) License | Yes o / No o |
| 13 | Contractor shall provide proof of being Qualified Person in industrial safety and fall protection as defined by OSHA and ANSI | Yes o / No o |
| 14 | Contractor shall provide provide a technical proposal of how they will solve all of the constraints in the SOW | Yes o / No o |
| 15 | Contractor shall provide conceptual drawings of a proposed overhead fall protection system(s) | Yes o / No o |
| 16 | Contractor shall provide proof be being able to do a site study | Yes o / No o |
| Contra |
| Last Update: | 11/12/15 |
| 2:17:13 PM |
| DESIGN-BUILD FALL PROTECTION SYSTEM (B3102) - Technical Evaluation Criteria Checklist | ||
| The overhead fall protection systems must meet the following requirements to be technically acceptable: | Meets Requirement? | |
| DRAFT | ||
| 1 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with designing overhead fall protection system(s) for military aircraft hangar to be used for work on military aircraft | Yes o / No o |
| 2 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with designing overhead fall protection system(s) for government facilities to be used for work on military aircraft | Yes o / No o |
| 3 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with installing overhead fall protection system(s) for military aircraft hangar to be used for work on military aircraft | Yes o / No o |
| 4 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with installing overhead fall protection system(s) for government facilities to be used for work on military aircraft | Yes o / No o |
| 5 | Contractor shall demonstrate and show evidence of extensive knowledge and experience with industrial safety and fall protection | Yes o / No o |
| 6 | Contractor shall show evidence that he is a world-wide authority in the field of industrial safety and fall protection | Yes o / No o |
| 7 | Contractor shall show proof that he is a registered Safety Engineer CA/MA | Yes o / No o |
| 8 | Contractor shall show proof that he is a certifified safety professional, CSP | Yes o / No o |
| 9 | Contractor shall show proof that he has a Professional Engineer (P.E.) License in the state of Oklahoma | Yes o / No o |
| 10 | Contractor shall show proof that he is a Qualified Person in OSHA and ANSI standards for Fall Protection and approved for design work | Yes o / No o |
| Last Update: | 11/12/15 |
| 1:26:31 PM |
File details come from the government source that posted it. Updated .