Attach_5_-_DOL_Wage_Determination.pdf

General Decision Number: GA170134 02/03/2017 GA134

Superseded General Decision Number: GA20160134

State: Georgia

Construction Type: Building

County: Cobb County in Georgia.

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January

1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017.

The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/06/2017

1 02/03/2017

ASBE0048-001 04/01/2016

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR........................$ 26.92 14.96

ASBE0048-002 04/01/2016

Rates Fringes

FIRESTOPPER......................$ 26.92 14.96

BOIL0026-001 01/01/2013

Rates Fringes

BOILERMAKER......................$ 24.91 19.69

* ELEV0032-001 01/01/2017

Rates Fringes

ELEVATOR MECHANIC................$ 38.88 31.585+a+b

PAID HOLIDAYS:

a. New Year's Day, Memorial Day, Independence Day, Labor Day, FA6703-17-B-0001

Attachment 5

Vetern's Day, Thanksgiving Day, the Friday after

Thanksgiving, and Christmas Day.

b. Employer contributes 8% of regular hourly rate to vacation pay credit for employee who has worked in business more than 5 years; 6% for less than 5 years' service.

ENGI0926-001 07/01/2013

Rates Fringes

POWER EQUIPMENT OPERATOR:

Backhoe/Excavator, Bobcat/Skid Loader/Skid

Steer, Bulldozer, Forklift, and Loader........$ 23.39 10.13

Crane.......................$ 27.88 10.13

Oiler.......................$ 18.70 10.13

PLUM0072-023 08/01/2016

PLUMBER..........................$ 27.98 13.58

PLUM0072-024 08/01/2016

PIPEFITTER (Including

Installation of HVAC Pipe, HVAC Unit, & HVAC Electrical

/Temperature Controls)...........$ 27.98 14.03

SFGA0669-001 04/01/2016

SPRINKLER FITTER (Fire

Sprinklers)......................$ 27.79 16.77

SHEE0085-001 08/01/2012

SHEET METAL WORKER (Including

HVAC Duct Installation;

Excluding Metal Roof

Installation)....................$ 29.70 13.07

SUGA2012-041 08/11/2012

ACOUSTICAL CEILING MECHANIC......$ 15.00 0.00

ALARM INSTALLER..................$ 19.36 3.78

BRICKLAYER.......................$ 16.00 0.00

CARPENTER (Drywall Finishing, Drywall Hanging, and Metal

Stud Installation)...............$ 18.22 0.00

CARPENTER, Excludes

Acoustical Ceiling

Installation, Drywall

Finishing/Taping, Drywall

Hanging, Form Work, and Metal

Stud Installation................$ 17.91 2.72

CEMENT MASON/CONCRETE FINISHER...$ 15.59 2.45

ELECTRICIAN (Low Voltage

Wiring and Installation of

Sound and Communication

Systems).........................$ 21.76 5.70

ELECTRICIAN, Excludes Low

Voltage Wiring and

Installation of Alarms and

Sound and Communication

Systems..........................$ 22.39 5.28

FLOOR LAYER (Carpet, Vinyl and Resilient Flooring)..........$ 20.00 0.00

FORM WORKER......................$ 13.37 0.50

GLAZIER..........................$ 17.55 3.50

INSULATOR (Batt, Blown and

Foam)............................$ 17.67 0.14

IRONWORKER, REINFORCING..........$ 20.48 8.41

IRONWORKER, STRUCTURAL...........$ 20.00 0.35

LABORER: Common or General......$ 13.30 4.55

LABORER: Flagger................$ 13.44 0.00

LABORER: Landscape..............$ 12.19 0.00

LABORER: Mason Tender - Brick...$ 9.00 0.00

LABORER: Pipelayer..............$ 12.00 0.23

OPERATOR: Asphalt Spreader......$ 16.53 0.00

OPERATOR: Grader/Blade..........$ 17.52 0.00

OPERATOR: Roller................$ 14.49 0.00

OPERATOR: Screed................$ 14.17 0.00

PAINTER: Brush, Roller and

Spray............................$ 18.00 1.21

ROOFER, Excludes Installation of Metal Roofs...................$ 10.49 0.64

SHEET METAL WORKER (Metal

Roofs Installation)..............$ 21.75 0.00

TILE FINISHER....................$ 10.36 0.00

TILE SETTER......................$ 20.00 0.00

TRUCK DRIVER: Dump Truck........$ 15.77 0.00

TRUCK DRIVER: Lowboy Truck......$ 17.41 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the

Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses

(29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate

(weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or

"UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the

Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the

Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator

(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator

U.S. Department of Labor

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative

Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION