Attachment 5 - RFI 01.pdf
PDF 216 KB Posted
- Attached to
- EMERY LANES KADENA AFB, PIN SETTER UPGRADE Federal contract opportunity
- Solicitation number
- FA527024QA017
About this file
This memorandum provides responses to questions from vendors regarding a Request for Information solicitation. The solicitation seeks to upgrade pinsetters at Emery Lanes at Kadena Air Force Base in Okinawa, Japan. Specifically, the scope of work involves removing 34 existing AMF 82/70 pinspotters and replacing them with 34 new XLI EDGE free fall pinspotters along with a computer control system and interfaces. The contractor will be responsible for initial setup, timing, and training base staff to operate the new equipment. The contractor must also provide all tools and materials for removal and installation. The point of contact for inquiries is Sayo van der Woude at the listed email address.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA527024QA017-0001_Site Visit.pdf | ||
| Attachment 4 - Site Visit Reservation Form.docx | DOCX document | |
| Attachment 2 - Price List.xlsx | XLSX spreadsheet | |
| Attachment 3 - FAR and DFARS Clauses and Provisions.pdf | ||
| FA527024QA017_Combo.pdf | ||
| Attachment 1 - SOW_20240126.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
18TH CONTRACTING SQUADRON (PACAF)
KADENA AB, JAPAN
13 Feb 2024
MEMORANDUM FOR ALL VENDORS INTERESTED
FROM: 18th CONS/PKA Unit 5199
APO AP 96368-5199
SUBJECT: Request for Information (RFI) Solicitation Pin Setters Update
Solicitation number: FA527024QA017
Title: Kadena AB, Okinawa, Japan
1. We have received the following questions from all contractor and responses are as follows for your information:
No. Reference Question Government Response 1 SOW Page 3, Section 1.1.2 It states, … “All required electrical connections.” Can you please expand upon that?
When we install new pinspotters, we include the connectors on the pinspotter end, but electrical work will need to be done on the part of the center or military base prior to the pinspotters being installed. This is because the current pinspotters are on 110 volt circuits and must be switched out to 220 volt circuits. Can you confirm that the center/military will perform the required electrical upgrade at the center prior to the pinspotter installation?
Yes
2 SOW Page 3, Section 1.1.2
It states, “The following facilities will be included in the work specified by this document:
113.” By 113, that is referring just to the address of the center, correct?
Yes, 113 is the Building Number
2. Point of contact is Sayo van der Woude at sayo.van_der_woude.jp@us.af.mil.
File details come from the government source that posted it. Updated .