Attachment_3,_3D_Printer_Specification_Sheet.pdf

Attachment 3, 3D Printer Specification Sheet

1) 3D Printer Bundle must consist of:

a) Must include System dimensions of at least 51x35.5x78.7 inch(129.5x90.2x198.4 cm)

b) Must come with 16x14x16 inch (406x355x406 mm) Envelope

c) Must come with Four Material Bays (2 model / 2 support)

d) Must include 1 Year Warranty

e) Must be within CE Conformance

f) Must come with Welcome Kit, Fortus (PN:155-00010)

g) Must include the Insight Software

h) Must include the Control Center Software

i) Must include the GrabCAD Software

j) Must be able produce parts within an accuracy of +/- .127mm (+/- .005 in.) or +/- .0015mm (+/-

.0015 in.) whichever is greater

k) Must come with * Transformer Required if power needs are not existing*

2) Must come with Isolation Transformer 200/220/230/240V 50/60Hz

Material Options and Upgrades

1) Must include Standard Material Bundle:

a) Must include software license that enables: ABS-M30, ABS-M30i, ABS-ESD7, ASA

b) Must come with Two (2) ABS-M30 (Natural) Filament Canister

c) Must come with Two (2) ASA (Natural) Filament Canister

d) Must come with Two (2) SR30 Soluble Release Support Canister

e) Must come with One (1) T12/T12SR30 Set

f) Must come with One (1) T16/T12SR30 Set

g) Must come with One (1) Foundation Sheet (ABS/PC) Fortus 450mc

2) Must include Engineering Material Bundle:

a) Includes software license that enables: PC, PC-ISO, PC-ABS, Nylon 12 and ST130

b) Must come with Two (2) PC (White) Filament Canister

c) Must come with Two (2) Nylon 12 (Black) Filament Canister

d) Must come with One (1) SR100 Soluble Release Support Canister

e) Must come with One (1) SR 110 Soluble Release Support Canister

f) Must come with One (1) T12/T12SR100 Set

g) Must come with One (1) T16/T12SR100 Set

h) Must come with One (1) Foundation Sheet (ABS/PC) Fortus 450mc

i) Must come with One (1) Foundation Sheet (Nylon) Fortus 450mc

3) Must include High Performance Material Bundle:

a) Must include software license that enables: ULTEM 9085,ULTEM 1010, Nylon 12CF and ST130

b) Must come with Two (2) ULTEM 9085 (Natural) Filament Canister

c) Must come with One (1) ULTEM 9085 Support Canister

d) Must come with Two (2) ULTEM 1010CG (Natural) Filament Canister

e) Must come with One (1) ULTEM 1010 Support Canister

f) Must come with One (1) Foundation Sheet (Ultem) Fortus 450mc

g) Must come with One (1) T16/T16 Set [U9085, 10-slice]

h) Must come with One (1) T20/T16 Set [U1010, 13-slice]

i) Must come with One (1) T14/T16 Set Ultem 1010 [10-slice]

j) Must include One (1) ULTEM 1010 Purge Ledge, Fortus 450mc

4) Must include Nylon 12CF Hardware upgrade:

a) Required to purchase to use Nylon 12CF with High Performance Bundle

b) Must include Nylon 12CF Delivery Head, Hardened drive blocks, Y-block and storage for Head

Services

1) Must include On-site installation

a) Must include system set up

Support Removal Equipment and Supplies

1) Must come with SCA 3600 Cleaning System:

a) Must come with 16"x16"x14" (406x406x356mm) Work Envelope

b) Must include One Year Warranty

c) Must be UL, CSA, CE Approved

d) Must be 208-240VAC, 20A, 50/60Hz, single phase, grounded

e) Must come with 102 Liter (27 Gallon) Tank Capacity

2) Must come with P400-SC Soluble Concentrate (case of 12)