Attachment_1._Salient_Characteristics.docx

SPECIFICATIONS

CAPACITY:

Swing over bed 600 mm (23.6") Swing over carriage 400 mm (15.7") Maximum turning diameter 300 mm (11.8") Maximum turning length 290 mm (11.4")

SPINDLE:

Spindle speed 6,000 rpm Spindle nose A2-5 Draw tube ID 52 mm (2.047") Standard chuck through hole ID 52 mm (2.047") Spindle bore diameter 61 mm (2.40") AC spindle motor (15 min. rating) 15 kW (20 hp) Maximum spindle torque (15 min. rating) 127 Nm (93.6 ft-lb) Standard chuck size 175 mm (6.89")

C-AXIS:

Minimum programmable angle 0.001 degree Rapid traverse rate 200 rpm C-axis repeatability ±0.006 degree C-axis positioning accuracy 0.0167 degree

BED, SADDLE & CROSS SLIDE:

Angle of slant bed 30 degree X axis travel 205 mm (8.07") Z axis travel 340 mm (13.38") X axis guide way span 228 mm (8.97") Z axis guide way span 354 mm (13.9") X axis rapid traverse rate 30 m/min (1,181 ipm) Z axis rapid traverse rate 36 m/min (1,417 ipm) X axis ball screw diameter 32 mm (1.25") Z axis ball screw diameter 32 mm (1.26") X axis feed thrust (continuous) 6,207 N (1,395 lb) X axis feed thrust (intermittent) 9,931 N (2,232 lb) Z axis feed thrust (continuous) 5,172 N (1,162 lb) Z axis feed thrust (intermittent) 8,276 N (1,860 lb) X axis repeatability ±0.002 mm (±0.00008") Z axis repeatability ±0.003 mm (±0.00012")

TURRET:

Number of tools 12 Tool positions 24 Tool holder type BMT-45 Turning tool shank size (mm turret 20 mm) .75" Boring bar diameter (mm turret 32 mm) 1.25" Turret index time (next station swivel time) 0.11 second Tool selection Bi-directional Curvic coupling diameter 180 mm (7.1") Turret clamping force 50 kN (11,240 lb) Turret index repeatability ±0.0005 degree

ROTARY TOOLS:

Rotating tool RPM 6,000 rpm Rotating tool spindle motor (10 min. rating) 3.7 kW (5 hp) Rotating tool torque (10 min. rating) 24 Nm (17.3 ft-lb) Rotating tool collet type ER 20 Milling collet capacity 5/64 to 1/2"

TAILSTOCK:

Tailstock center MT #4 live Maximum tailstock quill thrust 3.6 kN (810 lb) Maximum tailstock hydraulic pressure 40 bar (580 psi) Tailstock guide way span 214 mm (8.42")

COOLANT SYSTEM:

Coolant pump pressure 4.5 bar (65 psi) Coolant pump motor 1.1 kW (1.4 hp) Coolant tank capacity 145 l (38 gal)

GENERAL:

Machine weight 3,170 kg (7,000 lb) Floor space - length x width 2,320 mm x 1,595 mm (91.3" x 63") Floor space – length with hinge belt chip conveyor 3,320 mm (131.5") Machine Height 1,693 mm (66.6") Height from floor to spindle center 1,060 mm (41.7") Voltage required 205-235V/3 ph/60 Hz Power requirement 26 kVA (68 Amps @ 220 Volts)

ADDITIONAL:

All required inserts, insert holders, tool holders, boring bars, boring bar inserts, etc for metalcrafting operation, including the necessary training to utilize the machine.

NOTE: AN OR EQUAL ITEM IS ACCEPTABLE. SHOULD YOU HAVE A PRODUCT THAT DOES NOT EXACTLY MEET THESE SPECIFICATIONS, HOWEVER IT IS COMPARABLE, PLEASE STILL PROVIDE A QUOTE FOR EVALUATION.