Attachment_2_3D_Fused_Deposition_Modeling_(FDM)_Printer_Salient_Characteristics.pdf

FA5000‐17‐T‐0181

Attachment 2: Salient Characteristics

3D Fused Deposition Modeling (FDM) Printer Salient Characteristics

System must be new

Color LCD Monitor

Maximum Machine size: 50”W X 36”D X 78”H

Minimum printing/build envelope 16” X 14” X 16”.

Utilizes an enclosed build chamber with heat. Helps the materials form together which increases accuracy

Minimum of 4 material bays (2 model/ 2 support)

Capability to print/build layers in range from .005” ‐ .013” for high resolution depending on material

Produce parts within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater.

Breakaway or soluble support structure system for steep angles or overhangs depending on material used during the build.

Utilizes textured plastic build platforms to prevent part from lifting during the print process

Ability to print in solid fill, sparse high density, or sparse low density interior infill

Utilizes exchangeable extrusion tips in print head

Includes onboard calibration capability

Utilizes sealed material cartridges

Capable of printing the following materials:

o ABS‐M30 o ABS‐M30I o ABS‐ESD7 o ASA o PC‐ISO o PC o PC‐ABS o FDM Nylon 12 o FDM Nylon 12 CF (Carbon Fiber) o ST‐130 o ULTEM 9085 Resin o ULTEM 1010 Resin

Includes licensed file processing software to operate the machine.

o Contractor shall include training for the software for minimum of (4) individuals

Machine start‐up to include assembling any components, testing, and operational run as required by manufacturer.

PRINTER MINIMUM MATERIALS REQUIREMENTS:

Includes standard material bundle with the following:

o ‐ Includes software license that enables: ABS‐M30, ABS‐M30i, ABS‐ESD7, ASA o ‐ Two (2) ABS‐M30 (Natural) Filament Canister o ‐ Two (2) ASA (Natural) Filament Canister o ‐ Two (2) SR30 Soluble Release Support Canister o ‐ One (1) T12/T12SR30 Set

FA5000‐17‐T‐0181

Attachment 2: Salient Characteristics o ‐ One (1) T16/T12SR30 Set o ‐ One (1) Foundation Sheet (ABS/PC)

Includes Engineering Material Bundle with the following:

o ‐ Includes software license that enables: PC, PC‐ISO, PC‐ABS, Nylon 12 o ‐ Two (2) PC (White) Filament Canister o ‐ Two (2) Nylon 12 (Black) Filament Canister o ‐ One (1) SR100 Soluble Release Support Canister o ‐ One (1) SR 110 Soluble Release Support Canister o ‐ One (1) T12/T12SR100 Set o ‐ One (1) T16/T12SR100 Set o ‐ One (1) Foundation Sheet (ABS/PC) o ‐ One (1) Foundation Sheet (Nylon)

Includes High Performance Material Bundle with the following o ‐ Includes software license that enables: ULTEM 9085,ULTEM 1010, Nylon 12CF and

ST130

o ‐ Two (2) ULTEM 9085 (Natural) Filament Canister o ‐ One (1) ULTEM 9085 Support Canister o ‐ Two (2) ULTEM 1010CG (Natural) Filament Canister o ‐ One (1) ULTEM 1010 Support Canister o ‐ One (1) Foundation Sheet (Ultem) o ‐ One (1) T16/T16 Set [U9085, 10‐slice] o ‐ One (1) T20/T16 Set [U1010, 13‐slice] o ‐ One (1) T14/T16 Set Ultem 1010 [10‐slice] o ‐ One (1) ULTEM 1010 Purge Ledge

Includes Nylon 12CF Hardware upgrade o ‐Capability to use Nylon 12CF with High Performance Bundle o ‐Includes Nylon 12CF Delivery Head, Hardened drive blocks, Y‐block and Head storage

SUPPORT MATERIAL REMOVAL SYSTEM MINIMUM REQUIREMENTS:

System must be new

• Utilizes heated Ultrasonic system to remove soluble support structure

Minimum chamber size must match minimum print/build envelope

Electrical Power requirements 1/phase/120VAC, 15 Amp or equivalent

System Compatible with EcoWorks soluble concentrate