Amendment5.pdf

PDF 3 MB Posted Sep 18, 2015

Attached to: Aircraft Arresting Systems Refurbish Federal contract opportunity
Solicitation number: FA5000-15-T-0219
Issued by: Department of the Air Force Pacific Air Forces

About this file

From the source

Amendment 5 which includes the -4 T.O.

View the file

Other files for this federal contract opportunity

Other files attached to Aircraft Arresting Systems Refurbish, newest first.
File	Type	Posted
Amendment4.pdf	PDF	Sep 18, 2015
Amendment3.pdf	PDF	Sep 17, 2015
Amendment2.pdf	PDF	Sep 17, 2015
Amendment1.pdf	PDF	Sep 15, 2015
COMBO.pdf	PDF	Sep 10, 2015

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

TO 35E8-2-5-4

TECHNICAL MANUAL

ILLUSTRATED PARTS BREAKDOWN

AIRCRAFT ARRESTING BARRIER

MODEL BAK-12/E32A

PART NUMBERS

52-W-1765-1 52-W-2220-1 52-W-2291-1 52-W-2291-2

52-W-2291-801

GULF & WESTERN INDUSTRIES, INC.

AF41(608)37633

DISCLOSURE NOTICE - This information is furnished upon the condition that it will not be released to another nation without the specific authority of the Department of the Air Force of the United States, that it will be used for military purposes only, that individual or corporate rights originating in the information, whether patented or not, will be respected, that the recipient will report promptly to the United States, any known or suspected compromise, and that the information will be provided substantially the same degree of security afforded it by the Department of Defense of the United States. Also, regardless of any other markings on the document, it will not be downgraded or declassified without written approval of the originating United States agency.

DISTRIBUTION STATEMENT C - Distribution authorized to U.S. Government Agencies and their contractors (Administrative or Operational Use) (30 June 2005). Other requests for this document shall be referred to 406 SCMS/GUEE, Robins AFB, GA 31098. Questions concerning technical content shall be referred to AFLCMC/WNZEC.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401, et seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

HANDLING AND DESTRUCTION NOTICE - Comply with distribution statement and destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Published Under Authority of the Secretary of the Air Force

30 JUNE 2005 CHANGE 10 - 26 MAY 2013

BASIC AND ALL CHANGES HAVE BEEN MERGED TO MAKE THIS A COMPLETE PUBLICATION.

NOTE: The portion of the text affected by the change is indicated by a vertical line in the outer margins of the page. Changes to illustrations are indicated by shaded or screened areas, or by miniature pointing hands.

INSERT LATEST CHANGED PAGES. DESTROY SUPERSEDED PAGES.

LIST OF EFFECTIVE PAGES

*Zero in this column indicates an original page.

USAF

Page *Change No. No.

Dates of issue for original and changed pages are:

Title A i ii 1-1 - 1-7 1-8 Blank 2-1 - 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 Blank 2-16.1 Added 2-16.2 Blank 2-17 - 2-21 2-22 2-23 - 2-27 2-28 2-29 - 2-32 2-33 2-34 - 2-39 2-40 2-41 2-42 2-43 2-44 - 2-46 2-47 2-48 - 2-58 2-59

2-60 - 2-75 2-76 2-77 2-78 2-79 2-80 2-81 - 2-85 2-86 - 2-87 2-88 - 2-92 2-93 2-94 - 2-114 2-115 2-116 - 2-124 2-125 2-126 Blank 3-1 3-2 3-3 3-4 3-5 3-6 - 3-7 3-8 3-8.1 Added 3-8.2 Blank 3-9 3-10 3-11 3-12

Original. . . . . . . 0 . . . . . . . . . 30 June 2005 Change . . . . . . . 1 . . . . . . . 15 August 2006 Change . . . . . . . 2 . . . . 15 September 2006 Change . . . . . . . 3 . . . . . . 1 December 2006 Change . . . . . . . 4 . . . . . . . . . .25 July 2007 Change . . . . . . . 5 . . . . .19 November 2008

Change . . . . . . . 6 . . . . . . 9 December 2010 Change . . . . . . . 7 . . . . . . . . . . 9 May 2011 Change . . . . . . . 8 . . . . . . . . 8 August 2011 Change . . . . . . . 9 . . . . . . .13 October 2011 Change . . . . . . . 10 . . . . . . . . 26 May 2013

A Change 10

TOTAL NUMBER OF PAGES IN THIS PUBLICATION IS 154, CONSISTING OF THE FOLLOWING:

TABLE OF CONTENTS

Chapter Page Chapter Page

1 FOREWORD............................................................. 1-1

1.1 GENERAL .............................................. 1-1

1.2 INSTALLATION DIFFERENCES ........ 1-1

1.3 ILLUSTRATED PARTS

BREAKDOWN................................... 1-1

1.4 SECTION I - INTRODUCTION............ 1-1

1.5 SECTION II - GROUP ASSEMBLY

PARTS LIST....................................... 1-1

1.6 ABBREVIATIONS ................................ 1-1

1.7 FIGURE AND INDEX NUMBER

COLUMN ........................................... 1-1

1.8 PART NUMBER COLUMN .................. 1-1

1.9 DESCRIPTION COLUMN .................... 1-1

1.10 INDENTION........................................... 1-1

1.11 CROSS REFERENCES.......................... 1-1

1.12 DETAIL BREAKDOWN ....................... 1-2

1.13 UNITS PER ASSEMBLY COLUMN.... 1-2

1.14 USABLE ON CODE COLUMN ............ 1-2

1.15 VENDORS CODES................................ 1-2

1.16 SECTION III - NUMERICAL

INDEX ................................................ 1-4

1.17 PART NUMBER NUMERICAL

ARRANGEMENT.............................. 1-4

1.18 STOCK NUMBERS ............................... 1-4

1.19 QUANTITY PER ARTICLE

COLUMN ........................................... 1-4

1.20 CROSS REFERENCES.......................... 1-5

1.21 SOURCE, MAINTENANCE AND

RECOVERABILITY SMR

CODES ............................................... 1-5

2 MAINTENANCE PARTS BREAKDOWN.............. 2-1

BAK-12 Standard (Expeditionary) Installation ......... 2-2 BAK-12 Bolted-Up (Expeditionary) Installation ...... 2-4 BAK-12 Semi-Permanent Installation

(With Runway Edge Sheaves) ............ 2-6 BAK-12 Semi-Permanent Installation

(With Fairleads) .................................. 2-8 BAK-12 Concrete Pit Permanent Installation

(With Runway Edge Sheaves) .......... 2-10 BAK-12 Concrete Pit Permanent Installation

(With Fairleads) ................................ 2-12 Tape Connector Assembly, 8½ Inch Tape, 1 Inch

Pendant Cable ................................... 2-14

Tape Connector Assembly, 1¼ Cable ..................... 2-15 Anchor Assembly ................................................. 2-16.1 Sheave Assembly..................................................... 2-17 Fairlead Unit Assembly ........................................... 2-18 Tape Brush Assembly.............................................. 2-21 Sheave Assembly-Tape ........................................... 2-22 Arresting Engine Assembly..................................... 2-23 Fluid Coupling ......................................................... 2-30 Hub Sheave Assembly............................................. 2-31 Gear Reducer ........................................................... 2-32 Fluid Coupling Assembly (52-D-6012-1) ............... 2-33 Rewind Clutch Control - Packette Rewind

Engine ............................................... 2-34 Rewind Clutch Control - Wisconsin Rewind

Engine ............................................... 2-36 Hydraulic System..................................................... 2-40 Control Valve Linkage (1765 Packette/2220

Wisconsin) ........................................ 2-44 Control Valve Linkage (2291 Wisconsin)............... 2-46 Valve Gland Assembly ............................................ 2-48 Brake Water Cooling System (1756 Packette/2220

Wisconsin) ........................................ 2-50 Brake Water Cooling System (2291 Wisconsin)..... 2-53 Cam Drive Tensioner............................................... 2-56 Engine, Rewind - Packette....................................... 2-58 Exhaust Pipe and Jacket Installation........................ 2-61 Engine Rewind - Wisconsin Type MVG4D............ 2-63 Engine Rewind - Wisconsin Type V-465D ............. 2-66 Synchronizing Drive Arrangement

(1765 Packette) ................................. 2-68 Synchronizing Drive Arrangement

(2220 Wisconsin) .............................. 2-70 Synchronizing Drive Arrangement

(2291 Wisconsin) .............................. 2-72 Reel Assembly ......................................................... 2-74 Hydraulic Clutch Rewind Assembly ....................... 2-77 Carrier Assembly and Clutch Assembly.................. 2-79 Pin Rewind Assembly.............................................. 2-81 Pin Rewind Assembly.............................................. 2-83 Pin Rewind Assembly.............................................. 2-85 Brake Carrier Assembly .......................................... 2-86 Carrier Assembly ..................................................... 2-87

Change 6 i ii Change 5

TABLE OF CONTENTS - CONTINUED

Chapter Page Chapter Page

Cam Clutch Sprocket Assembly...............................2-88 Deck Sheave Assembly ............................................2-89 Dual BAK-12 Cable to Tape Connection for

1250 Foot Runout ..............................2-91 Deflector Sheave Assembly......................................2-92 Sheave Assembly-Tape ............................................2-93 Engine Accessories - Wisconsin Type MVG4D ......2-94 Engine Accessories - Wisconsin Type V-465D .......2-98 Power Take-off Assembly ......................................2-103 BAK-12 Dual Installation.......................................2-105

Tape Connector Assembly .....................................2-107 Deck Sheave Assembly ..........................................2-108 Tape Brush and Mounting Assembly .....................2-110 Arresting Engine Assembly....................................2-111 Hydraulic System ...................................................2-116 Brake Water Cooling System .................................2-119 Reel Assembly........................................................2-121 Brake Assembly......................................................2-124

3 NUMERICAL INDEX...............................................3-1

CHAPTER 1

FOREWORD

1.1 GENERAL.

This Illustrated Parts Breakdown lists the installations, as-semblies and detail parts of the Aircraft Arresting Gear Model BAK-12, manufactured by E. W. Bliss Company, Bliss- Portland Division, South Portland, Maine.

1.2 INSTALLATION DIFFERENCES.

The BAK-12 is designed for installation as either an expedi-tionary or permanent runway facility. Figure 1 and Figure 2 show the alternate arrangements used in expeditionary instal-lations. Figure 3 thru Figure 6 cover permanent installations and show the various arrangements that are used in both pit and on-grade installations.

1.3 ILLUSTRATED PARTS BREAKDOWN.

This Illustrated Parts Breakdown is divided into three sec-tions as follows:

a. Section I - Introduction

b. Section II - Group Assembly Parts List

c. Section III - Numerical Index

1.4 SECTION I - INTRODUCTION.

This section contains information and instructions for the use of the Illustrated Parts Breakdown.

1.5 SECTION II - GROUP ASSEMBLY PARTS LIST.

The Group Assembly Parts List consists of parts breakdown lists separated into figures by main assemblies and/or subas-semblies, and keyed to associated illustrations by figure and index numbers. All parts are listed in disassembly sequence, except where a sequence of disassembly does not apply. The relation of all parts to their next higher assembly and/or main assembly is shown either by indention (see Paragraph 1.10), or by parenthetical crossreference (see Paragraph 1.11).

1.6 ABBREVIATIONS.

The abbreviations used in the Group Assembly Parts List (Section II) are in accordance with MIL STD-12 except as follows:

AP Attaching parts NO NUMBER Not identifiable by number REF Reference only

1.7 FIGURE AND INDEX NUMBER COLUMN.

The figure number appears adjacent to the Part Number of the installation or assembly it depicts. The subsequent numbers, preceded by a hyphen, are index numbers. They are used to locate detail parts on the illustration.

1.8 PART NUMBER COLUMN.

This column contains the part number assigned to each part.

If an item is listed without a part number, “NO NUMBER” will appear in this column. If the item listed is a commercial part and a part number has not been designated, “COML” will appear. In either case, a description of the item and/or assembly will be found in the description column.

1.9 DESCRIPTION COLUMN.

This column contains the nomenclature and descriptive modifiers for each item. Manufacturers of vendor items are identified by a code number appearing in parentheses follow-ing the nomenclature. These code numbers are assigned by the Federal Supply Code for Manufacturer’s Cataloging Handbook H4-1 and H4-2.

1.10 INDENTION.

Parts listed in each parts breakdown are indented to indicate item relationship. Attaching parts follow immediately after the item they attach and are listed at the same indention. The parenthetical “(AP)”, (See Paragraph 1.13) is immediately after the item description. The indention procedure is illus-trated by the following example:

NOMENCLATURE

1 2 3 4 5 6 7 8 9 0

INSTALLATION

. ASSEMBLIES OR PARTS

. ATTACHING PARTS FOR THE ASSEMBLY OR

PARTS (AP)

. . SUBASSEMBLY OR PARTS

. . ATTACHING PARTS FOR THE SUBASSEM-

BLY OR PARTS (AP)

. . . SUB-SUBASSEMBLY OR DETAIL PARTS

1.11 CROSS REFERENCES.

The continuity of one parts breakdown list to another is maintained by parenthetical cross reference. These cross references indicate the location of either the detailed break-down or the next higher assembly of an item. The cross

1-1 reference appears in the DESCRIPTION column immediately after the item being referenced.

1.12 DETAIL BREAKDOWN.

When an item requires a detailed breakdown and it is impractical to show the breakdown on the assembly where it appears, the item is cross referenced parenthetically by figure number only to its detailed breakdown. Each detailed break-down is parenthetically cross referenced by figure and index number to its next higher assembly.

1.13 UNITS PER ASSEMBLY COLUMN.

This column lists the numbers of parts required per assembly, per subassembly and per sub-subassembly as applicable. If more than one assembly is required, the total number of such assemblies will appear. For bulk items, the letters “AR” (as required) will appear. Where items are listed for reference purposes the word “REF” will appear.

1.14 USABLE ON CODE COLUMN.

When a component is usable on all installations covered by this manual, no code will appear in this column. However, when components are used on specific installations, the code letters which follow will appear in this column. Coding is not extended to detail parts of separately illustrated components when the coding of the component itself is adequate to show proper relationship to the next higher assembly.

A- B- C- Standard Expeditionary Installation D- Bolted-Up Expeditionary Installation E- Semi-Permanent Installation (With Runway

Edge Sheaves) F- Semi-Permanent Installation (With Fairleads) H- Concrete Pit Permanent Installation (With

Runway Edge Sheaves) I- Concrete Pit Permanent Installation (With

Fairleads) J- 52-W-1765-1 Arresting Engine K- 52-W-2220-1 Arresting Engine L- 52-W-2291-1 Arresting Engine M- 52-W-1937-1 Fairlead Beam N- 52-W-2295-1 Fairlead Beam P- 52-W-2291-2 Arresting Engine Q- 52-W-2291-701 Arresting Engine R- Dual BAK-12 (72” reel) S- 52-W-2291-801 Arresting Engine

52-W-2295-201 Fairlead Beam 52-W-2295-301 Fairlead Beam

1.15 VENDORS CODES.

Gulf+Western Industries Inc. is the prime contractor for all parts. Standard code symbols placed in parentheses after the description are used to designate the manufacturer of pur-chased equipment installed without change or modification.

The code number, name and address of each manufacturer is listed below.

Code Vendor Name and Address 00000 Ordnance Corps 00736 Air Maze Corp.

Cleveland, Ohio 02695 Sealmaster Bearing Division of

Stephens-Adamson Mfg. Co., 03038 Long-Lok Corp.

Los Angeles, Calif.

03668 Garlock Packing Co., Chicago, Ill.

06848 Bendix Products Division of Bendix Aviation Corp., South Bend, Ind.

07915 Tactair, Inc., Bridgeport, Pa.

09922 Burndy Corp., Norwalk, Conn.

13829 Commercial Shearing and Stamping Co., Inc., Youngstown, Ohio

16764 Delco Remy Division of General Motors Corp., Anderson, Ind.

16859 The Deming Company Salem, Ohio

22508 Fisher Governor Co., Marshalltown, Iowa

24446 General Electric Schenectady, N.Y.

24981 Gits Bros. Mfg. Co., Chicago, Ill.

27393 Brewer Machine & Gear Co., St. Louis 6, Mo.

30327 Imperial Brass Mfg. Co., Chicago, Ill.

32480 Jones Motorola Co, Stanford, Conn.

37581 MacWhyte Co, Kenosha, Wisconsin

43334 New Departure Division of General Motors Corp.

Bristol, Conn.

44408 Oberdorier Foundries, Inc., 1-2

Syracuse, N.Y.

45681 Parker-Hannifin Corp., Cleveland, Ohio 45722 Parker Kalon Division of

General American Trans-portation Corp., Clifton, N.J.

47296 William S. Pine Co., Los Angeles, Calif.

51600 Rollway Bearing Co., Inc.

Syracuse, N.Y.

52676 SKF Industries, Inc., Philadelphia, Pa.

56878 Standard Pressed Steel Co., Jenkintown, Pa.

61208 Twin Disc Clutch Co., Racine, Wisconsin

66289 Wisconsin Motor Corp., Milwaukee, Wisc.

70270 Alemite Division Stewart Warner Corp., Chicago, Ill.

70417 Amplex Division of Chrysler Corp.

Detroit, Mich.

70436 Arens Controls, Inc., Evanston, Ill.

70462 Helicoid Gage Division of American Chain and Cable Co.

Bridgeport, Conn.

70709 Aeroquip Corp.

Barco Division, Barrington, Ill.

70810 Bendix Products Division of Bendix Aviation Corp.

South Bend, Indiana

70903 Belden Mfg. Co., Chicago 80, Ill.

71041 Boston Gear Works Division of Murray Co. of Texas Quincy, Mass.

71176 Browning Mfg. Co., Inc.

Maysville, Ky.

71468 Cannon Electric Co., Los Angeles, Calif.

71956 Dodge Mfg. Corp., Mishawaka, Indiana

72671 American Chain Division American Chain & Cable Co.

York, Pa.

72962 Elastic Stop Nut Corp. of America Union, N.J.

73015 Fabreek Products Co.

Boston, Mass.

73370 Fram Corp., East Providence, R.I.

73680 Garlock Packing Co., Palmyra, N.Y.

73957 Groov-Pin Corp., Ridgefield, N.J.

75535 Crosby-Laughlin Division American Hoist & Derrick Co., Fort Wayne, Ind.

75665 Lovejoy Flexible Coupling Co., Chicago, Ill.

76068 Mac-It Parts Co. Inc., Lancaster, Pa.

76474 Morse Chain Co., Ithaca, N.Y.

76680 Nat. Seal Div. of Federal- Mogul-Bower Brg. Inc., Redwood City, Calif.

76700 Nelson Muffler Corp., Staughton, Wisc.

78480 The Tillotson Mfg. Co., Toledo, Ohio

78553 Tinnerman Products, Inc., Cleveland, Ohio

79136 Waldes, Kohinoor, Inc., Long Island City, N.Y.

79425 Woods, T.B., Sons Co., Chambersburg, Pa.

79470 Weatherhead Co., Cleveland, Ohio

80256 Outboard Marine & Mfg. Co., Waukegan, Ill.

80756 Ramsey Corp., St. Louis, Mo.

81860 Barry Controls, Inc., Watertown, Mass.

82647 Metals & Controls Division Texas Inst. Inc., Attleboro, Mass.

82711 United States Steel Supply United States Steel Corp., Chicago, Ill.

82994 Link Belt Co., Phila., Pa.

83584 Driv Lok Pin Co., Sycamore, Ill.

84256 Aviation Development Co., Burbank, Calif.

84830 Lee Spring Co., Inc., Brooklyn, N.Y.

1-3

84971 T.A. Mfg. Corp., Los Angeles, Calif.

85181 Deublin Co.

1919 Stanley St.

Northbrook, Ill.

85362 Beacon Brush & Supply Co., Phila., Pa.

86768 Republic Mfg. Co., 15655 Brookpark Road Cleveland, Ohio

87041 Marine & Industrial Prod. Co., Phila., Pa.

88104 The Prestolite Co. Inc., Newark, N.J.

88127 SKF Industries, Inc., New York, N.Y.

88408 Continental Motors Corp., Detroit, Mich.

89110 Amp, Inc., Elizabethtown, Pa.

89691 Graybar Electric Co. Inc., Phila., Pa.

89849 Joseph T. Ryerson and Son, Inc.

Phila., Pa.

89887 Fairbanks Morse and Co., New York, N.Y.

91079 South Chester Corp., Chester, Pa.

92029 Auto-Ponents, Inc., Bellwood, Ill.

92563 McGill Mfg. Co., Bearings Division Valparaiso, Ind.

96152 Marvel - Schebler Products, Division of Borg-Warner Corp., Decatur, Ill.

96259 Fluid Controls, Inc., Mentor, Ohio

96881 Thomson Industries Manhasset, N.Y.

97674 Cone Drive Division of Michigan Tool Co.

Detroit, Mich.

98625 Aeroquip Corp.

Marman Division 11214 Exposition Blvd., Los Angeles, Calif.

99017 Protective Closures Co., Inc., CA Plugs Division, Buffalo, N.Y.

1.16 SECTION III - NUMERICAL INDEX.

The Numerical Index is a list of all part numbers in the Group Assembly Parts List. The Numerical Index is compiled in accordance with the numerical part number filing system described in Paragraph 1.17.

1.17 PART NUMBER NUMERICAL ARRANGEMENT.

Part number numerical arrangement starts in the left-hand column and continues from left to right, one column at a time, until part number arrangement is determined. The order of precedence in part number numerical arrangement is as follows:

a. First position arrangement;

(1) Letters A to Z

(2) Numerals 0 through 9

NOTE

Alphabetical O’s shall be considered numerical zeros.

b. Second and succeeding position arrangements:

(1) Space (blank column)

(2) Diagonal (slant)

(3) Point (period)

(4) Dash (-)

(5) Letters A through Z

(6) Numerals 0 through 9

1.18 STOCK NUMBERS.

The policy of including and updating stock number informa-tion in IPB manuals has been discontinued. Reference should be made to the S-00-1-1 USAF MASTER CROSS REFER- ENCE INDEX and for converted part number to stock number information.

1.19 QUANTITY PER ARTICLE COLUMN.

The QUANTITY PER ARTICLE column shows the total quantity of the specific part number used per article. The QUANTITY PER ARTICLE number is opposite the first entry of the part number and opposite the first figure and index number where the item appears in the Numerical Index.

Requirements are listed as total per article derived from the listings in the Group Assembly Parts List (Section II).

1-4

1.20 CROSS REFERENCES.

The parts listed in the Numerical Index are cross referenced by figure and index numbers to where they appear in the Group Assembly Parts List (Section II). When a part has not been assigned an index number in Section II, it is cross referenced by are number only.

1.21 SOURCE, MAINTENANCE AND RECOVER-

ABILITY SMR CODES.

This manual contains both Joint Military Services Uniform SMR Codes and Air Force Peculiar In-Being Source and

Repair Codes. Detailed coding criteria and transposition matrices for each coding method may be obtained from T.O.

00-25-195.

1-5

1-6

1-7/(1-8 blank)

CHAPTER 2

MAINTENANCE PARTS BREAKDOWN

2-1

Figure 1. BAK-12 Standard (Expeditionary) Installation

2-2

FIGURE &

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

1- 52-W-1766-1 BAK-12 STANDARD (EXPEDITIONARY)

INSTALLATION

1 A

1 62B35556 . PENDANT ASSY, 1 in. dia. (GFE) (Length to suit runway width (52-B-689-1

2 60C6030-2 . SUPPORT, Pendant-1 in. (GFE) . . . . . . . . . . . . . . . . . . . . AR A-F 60C6030-3 . SUPPORT, Pendant-1 1/4 in. (GFE) . . . . . . . . . . . . . . . . . AR A-F 7545764-01 *2 . SUPPORT, Pendant-1/4 in., 2 inches thick . . . . . . . . . . . . AR 419509-1 *3 . SUPPORT, Pendant-7 in.; 1 1/4, 2 inches thick. . . . . . . . . AR

3 52-W-2081-1 . TAPE CONNECTOR ASSY (See Figure 7) . . . . . . . . . . . . 2 A-F 4 52-W-1203-9 . TAPE, Nylon (1250 ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 A

8502251250C 87679 . TAPE, Nylon (1250 ft) 4A 68C37215-13 . TAPE, Nylon (1500 ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 A

8502251500C 87679 . TAPE, Nylon (1500 ft) 5 52-W-1937-1 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, K

52-W-2295-1 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, L 52-W-2295-301 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, L

6 152-A-1370-1 . STAKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 A, B 7 No Number . ANCHOR ASSY (See Figure 9). . . . . . . . . . . . . . . . . . . . . 8 A, B 8 52-W-1832-1 . SHEAVE ASSY (See Figure 10) . . . . . . . . . . . . . . . . . . . . 2 KL 9 52-W-1766-5 . NUT, Hex. (AP) 3/4-10 NC. . . . . . . . . . . . . . . . . . . . . . . . . 8 KL

10 52-W-1766-4 . WASHER, Lock (AP) 3-4 med . . . . . . . . . . . . . . . . . . . . . . 8 KL 11 52-W-1766-8 . SCREW, Cap, hex. hd. (AP) 3/4-10 NC by 3 in. lg. . . . . . . 8 KL 12 No Number . FAIRLEAD TUBES AND COUPLINGS (GFE). . . . . . . . . . AR A, C, D, E, F 13 152-A-1432-1 . ANCHOR BRACKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 A 14 52-W-1766-5 . NUT, Hex. (AP) 3/4-10 NC. . . . . . . . . . . . . . . . . . . . . . . . . 8 A 15 52-W-1766-4 . WASHER Lock (AP) 3-4 med . . . . . . . . . . . . . . . . . . . . . . 8 A 16 52-W-1766-7 . SCREW, Cap, hex. hd. (AP) 3/4-10 NC by 2-1/2 in. lg. . . . 8 A 17 52-W-1765-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 H

52-W-2220-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 I 52-W-2291-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 J 52-W-2291-2 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 M 52-W-2291-801 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 Q

18 52-B-779-1 . CLAMP, Tape 19 52-W-1765-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. lg.

8 H

52-W-2220-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. lg.

8 I

52-W-2291-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. lg.

8 J, M

20 64C33518-7 . TUBE, 1 in. pendant support instl. tool . . . . . . . . . . . . . . . 1 A-F 64C33518-11 . . TUBE, 1 1/4 in. pendant support instl. tool. . . . . . . . . . . 1 A-F

21 64C33478-7 . . ARBOR, 1 in. pendant support instl. tool . . . . . . . . . . . . 1 A-F 64C33478-11 . . ARBOR, 1 1/4 in. pendant support instl. tool . . . . . . . . . 1 A-F

*2 Note 2 inch supports may be used on all runways wider than 150 feet or when extreme high crown causes cable sag.

*3 Seven inch supports will not be used to correct EPH discrepancies without major command approval.

Change 2 2-3

Figure 2. BAK-12 Bolted-Up (Expeditionary) Installation

2-4

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

2- 52-W-2093-1 BAK-12 BOLTED-UP (EXPEDITIONARY)

INSTALLATION

1 B

1 515053-153 *1 . PENDANT CABLE, 1 1/4 in. x 153 ft. lg. used on 150 wide runway

515053-203 *1 . PENDANT CABLE, 1 1/4 in. x 203 ft. lg. used on 200 ft. wide runway

515053-303 *1 . PENDANT CABLE, 1 1/4 in. x 303 ft. lg. used on 300 ft. wide runway

2 60C6030-2 . SUPPORT, Pendant 1 in. (GFE) . . . . . . . . . . . . . . . . . . . . AR A-F 60C6030-3 . SUPPORT, Pendant 1 1/4 in. (GFE) . . . . . . . . . . . . . . . . . AR A-F 64C33518-7 . . TUBE, 1 in. pendant support instl. tool

(See Figure 1)

64C33518-11 . . TUBE, 1 1/4 in. pendant support instl. tool (See Figure 1)

64C33478-7 . . ARBOR, 1 in. pendant support instl. tool (See Figure 1)

64C33478-11 . . ARBOR, 1 1/4 in. pendant support instl. tool (See Figure 1)

7545764 *2 . SUPPORT, Pendant-1 1/4 in., 2 inches thick. . . . . . . . . . . AR 419509-1 *3 . SUPPORT, Pendant-7 in., 1 1/4 in. x 2 in. thick. . . . . . . . . AR

3 66D-1751 . TAPE CONNECTOR ASSY, For 1 1/4 in pendant cables

52-W-2067-1 . TAPE CONNECTOR ASSY, For 1 1/4 in diameter cable

4 52-W-1203-9 . TAPE, Nylon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 B 8502251250C 87679 . TAPE, Nylon (1250 ft)

5 52-W-1937-1 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, K 52-W-2295-1 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, L 52-W-2295-301 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, L

6 152-A-1370-1 . STAKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 A, B 7 No Number . ANCHOR ASSY (See Figure 9). . . . . . . . . . . . . . . . . . . . . 6 A, B 8 52-W-1765-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 H

9 52-W-2093-4 . NUT, Hex. (AP) 3/4-10 NC. . . . . . . . . . . . . . . . . . . . . . . . . 8 B 10 52-W-2093-3 . WASHER, Lock (AP) 3/4 med . . . . . . . . . . . . . . . . . . . . . . 8 B 11 52-W-2093-2 . SCREW, Cap, hex. hd. (AP) 3/4-10 NC x

3-1/2 in. Ig.

8 B

12 52-B-779-1 . CLAMP, Tape 13 52-W-1765-12 . SCREW, Cap, button hd. (AP) 3/8-16

UNC-2A x 1 in. Ig.

8 H

52-W-2220-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 I

52-W-2291-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 J, M

*1 Lengths other than those specified above will be furnished by special authorization, HQ

SAAMA.

*2 Note 2 inch supports may be used on all runways wider than 150 feet or when extreme high crown causes cable sag.

*3 Seven inch donuts will not be used to correct EPH discrepancies without major command approval.

Change 2 2-5

Figure 3. BAK-12 Semi-Permanent Installation (With Runway Edge Sheaves)

2-6

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

3- BAK-12 SEMI-PERMANENT INSTALLATION

(With runway edge sheaves) 1 C

1 515053-153 *1 . PENDANT CABLE, 1 1/4 in. x 153 ft. lg. used on 150 wide runway

515053-203 *1 . PENDANT CABLE, 1 1/4 in. x 203 ft. lg. used on 200 ft. wide runway

515053-303 *1 . PENDANT CABLE, 1 1/4 in. x 303 ft. lg. used on 300 ft. wide runway

2 60C6030-2 . SUPPORT, Pendant-1 in. (GFE) . . . . . . . . . . . . . . . . . . . . AR A-F 60C6030-3 . SUPPORT, Pendant-1 1/4 in. (GFE) . . . . . . . . . . . . . . . . . AR A-F 64C33518-7 . . TUBE, 1 in. pendant support instl. tool

(See Figure 1)

64C33518-11 . . TUBE, 1 1/4 in. pendant support instl. tool (See Figure 1)

64C33478-7 . . ARBOR, 1 in. pendant support instl. tool (See Figure 1)

64C33478-11 . . ARBOR, 1 1/4 in. pendant support instl. tool (See Figure 1)

7545764 *2 . SUPPORT, Pendant-1 1/4 inch, 2 inches thick . . . . . . . . . AR 419509-1 *3 . SUPPORT, Pendant-7 inch; 1 1/4 in. x 2 in. thick . . . . . . . AR

3 66D-1751 . TAPE CONNECTOR ASSY, For 1 1/4 in pendant cables

52-W-2067-1 . TAPE CONNECTOR ASSY, For 1 1/4 in diameter cable

4 52-W-1203-9 . TAPE, Nylon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 C 8502251250C 87679 . TAPE, Nylon (1250 ft)

5 52-W-2080-1 . DECK SHEAVE ASSY (See Figure 45) . . . . . . . . . . . . . . . 2 C, E 6 52-D-642-1 . TAPE BRUSH ASSY (See Figure 54) . . . . . . . . . . . . . . . . 2 C, E 7 No Number . FAIRLEAD TUBES AND COUPLINGS (GFE). . . . . . . . . . AR A, C, D, E, F 8 No Number . FAIRLEAD TUBE ANCHOR (AP) . . . . . . . . . . . . . . . . . . . AR A, C, D, E, F 9 52-W-1765-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 H

10 52-B-779-1 . CLAMP, Tape 11 52-W-1765-12 . SCREW, Cap, button hd. (AP) 3/8-16

UNC-2A x 1 in. Ig.

8 H

52-W-2220-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 I

52-W-2291-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 J, M

*1 Lengths other than those specified above will be furnished by special authorization, SA-ALC/MMIERA.

*2 Note 2 inch supports may be used on all runways wider than 150 feet or when extreme high crown causes cable sag.

*3 Seven inch donuts will not be used to correct

Change 2 2-7

Figure 4. BAK-12 Semi-Permanent Installation (With Fairleads)

2-8

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

4- BAK-12 SEMI-PERMANENT INSTALLATION

(With fairleads) 1 D

1 515053-153 *1 . PENDANT CABLE, 1 1/4 in. x 153 ft. lg. used on 150 wide runway

515053-203 *1 . PENDANT CABLE, 1 1/4 in. x 203 ft. lg. used on 200 ft. wide runway

515053-303 *1 . PENDANT CABLE, 1 1/4 in. x 303 ft. lg. used on 300 ft. wide runway

(See Figure 1)

64C33518-11 . . TUBE, 1 1/4 in. pendant support instl. tool (See Figure 1)

64C33478-7 . . ARBOR, 1 in. pendant support instl. tool (See Figure 1)

64C33478-11 . . ARBOR, 1 1/4 in. pendant support instl. tool (See Figure 1)

7545764 *2 . SUPPORT, Pendant-1 1/4 inch, 2 inches thick . . . . . . . . . AR 419509-1 *3 . SUPPORT, Pendant-7 inch; 1 1/4 in. x 2 in. thick . . . . . . . AR

3 66D-1751 . TAPE CONNECTOR ASSY, For 1 1/4 in pendant cables

52-W-2067-1 . TAPE CONNECTOR ASSY, For 1 1/4 in diameter cable

4 52-W-1203 . TAPE, Nylon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 D 8502251320C 87679 . TAPE, Nylon (1320 ft)

5 52-W-1937-1 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, K 52-W-2295-1 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, L 52-W-2295-2901 . FAIRLEAD UNIT ASSY (See Figure 11) . . . . . . . . . . . . . . 2 A, B, D, F, L

6 No Number . FAIRLEAD TUBES AND COUPLINGS (GFE). . . . . . . . . . AR A, C, D, E, F 7 No Number . FAIRLEAD TUBE ANCHOR (AP) . . . . . . . . . . . . . . . . . . . AR A, C, D, E, F

52-W-1832-1 . SHEAVE ASSY (See Figure 10) . . . . . . . . . . . . . . . . . . . . 2 K, L 9 52-W-1765-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 H

10 52-B-779-1 . CLAMP, Tape 11 52-W-1765-12 . SCREW, Cap, button hd. (AP) 3/8-16

UNC-2A x 1 in. Ig.

8 H

52-W-2220-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 I

52-W-2291-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 J, M

*1 Lengths other than those specified above will be furnished by special authorization, SA-ALC/MMIERA.

*2 Note 2 inch supports may be used on all runways wider than 150 feet or when extreme high crown causes cable sag.

*3 Seven inch donuts will not be used to correct

Change 2 2-9

Figure 5. BAK-12 Concrete Pit Permanent Installation (With Runway Edge Sheaves)

2-10

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

5- 52-W-2075-1 BAK-12 CONCRETE PIT PERMANENT

INSTALLATION (With runway edge sheaves) 1 E

1 515053-153 *1 . PENDANT CABLE, 1 1/4 in. x 153 ft. lg. used on 150 ft. wide runway

515053-203 *1 . PENDANT CABLE, 1 1/4 in. x 203 ft. lg. used on 200 ft. wide runway

515053-303 *1 . PENDANT CABLE, 1 1/4 in. x 303 ft. lg. used on 300 ft. wide runway

2 60C6030-3 . SUPPORT, Pendant (GFE) . . . . . . . . . . . . . . . . . . . . . . . . AR 7545764 *2 . SUPPORT, Pendant-1 1/4 inch, 2 inches thick . . . . . . . . . AR 419509-1 *3 . SUPPORT, Pendant-7 inch; 1 1/4 in. x 2 in. thick . . . . . . . AR

3 66D-1751 . TAPE CONNECTOR ASSY, For 1 1/4 in pendant cables

52-W-2067-1 . TAPE CONNECTOR ASSY, For 1 1/4 in diameter cable

4 52-W-1203 . TAPE, Nylon (GFE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 E 8502251320C 87679 . TAPE, Nylon (1320 ft)

5 52-W-2080-1 . DECK SHEAVE ASSY (See Figure 45) . . . . . . . . . . . . . . . 2 C, E 6 52-D-642-1 . TAPE BRUSH ASSY (See Figure 54) . . . . . . . . . . . . . . . . 2 C, E 7 No Number . FAIRLEAD TUBES AND COUPLINGS (GFE). . . . . . . . . . AR A, C, D, E, F 8 52-D-380-1 . DEFLECTOR SHEAVE ASSY (See Figure 47) . . . . . . . . . 4 E 9 52-W-1765-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 H

10 52-B-779-1 . CLAMP, Tape 11 52-W-1765-12 . SCREW, Cap, button hd. (AP) 3/8-16

UNC-2A x 1 in. Ig.

8 H

52-W-2220-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 I

52-W-2291-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 J, M

*1 Lengths other than those specified above will be furnished by special authorization, SA-ALC/MMIERA.

*2 Note 2 inch supports may be used on all runways wider than 150 feet or when extreme high crown causes cable sag.

*3 Seven inch donuts will not be used to correct

Change 2 2-11

Figure 6. BAK-12 Concrete Pit Permanent Installation (With Fairleads)

2-12

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

6- BAK-12 CONCRETE PIT PERMANENT

INSTALLATION (With fairleads) 1 F

1 515053-153 *1 . PENDANT CABLE, 1 1/4 in. x 153 ft. lg. used on 150 wide runway

1 F

515053-203 *1 . PENDANT CABLE, 1 1/4 in. x 203 ft. lg. used on 200 ft. wide runway

515053-303 *1 . PENDANT CABLE, 1 1/4 in. x 303 ft. lg. used on 300 ft. wide runway

2 60C6030-2 . SUPPORT, Pendant (GFE) . . . . . . . . . . . . . . . . . . . . . . . . AR A-F 60C6030-3 . SUPPORT, Pendant (GFE) . . . . . . . . . . . . . . . . . . . . . . . . AR 7545764 *2 . SUPPORT, Pendant-1 1/4 inch, 2 inches thick . . . . . . . . . AR

3 66D-1751 . TAPE CONNECTOR ASSY, For 1 1/4 in pendant cables

52-W-2067-1 . TAPE CONNECTOR ASSY, For 1 1/4 in diameter cable

4 52-W-1203 . TAPE, Nylon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 F 8502251320C 87679 . TAPE, Nylon (1320 ft)

6 No Number . FAIRLEAD TUBES AND COUPLINGS (GFE). . . . . . . . . . AR A, C, D, E, F 7 No Number . FAIRLEAD TUBE ANCHOR (AP) . . . . . . . . . . . . . . . . . . . AR A, C, D, E, F 8 52-W-1832-1 . SHEAVE ASSY (See Figure 10) . . . . . . . . . . . . . . . . . . . . 2 K, L 9 52-D-380-1 . DEFLECTOR SHEAVE ASSY (See Figure 47) . . . . . . . . . 4 E, F

10 52-W-1765-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 H 52-W-2220-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 I 52-W-2291-1 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 J 52-W-2291-2 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 M 52-W-2291-801 . ARRESTING ENGINE ASSY (See Figure 14) . . . . . . . . . 2 Q

11 52-B-779-1 . CLAMP, Tape 12 52-W-1765-12 . SCREW, Cap, button hd. (AP) 3/8-16

UNC-2A x 1 in. Ig.

8 H

52-W-2220-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 I

52-W-2291-12 . SCREW, Cap, button hd. (AP) 3/8-16 UNC-2A x 1 in. Ig.

8 J, M

*1 Lengths other than those specified above will be furnished by special authorization, SA-ALC/MMIERA.

*2 Note 2 inch supports may be used on all runways wider than 150 feet or when extreme high crown causes cable sag.

Change 2 2-13

Figure 7. Tape Connector Assembly, 8½ Inch Tape, 1 Inch Pendant Cable

FIGURE &

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

7- 7545535-10 TAPE CONNECTOR ASSY (See Figure 1, Figure 2, & Figure 3 for NHA)

REF

1 7545534-03 . PIN

2 MS51021-74 . SCREW (AP)

3 7545533-03 . NUT, LOCK (AP) 5/8-18 UNF-2B

4 66C1748 . TOP CLAMP

5 66C1749 . CLAMP

6 MS24667-67 . SCREW (AP)

7 52-W-2081-3 . SCREW, SOCKET hd. (AP) 3/4-10 UNC-2A

8 52-W-1845-1 . BODY

2-14 Change 5

Figure 8. Bak-12/Maas Tape/Pendant Connector Assembly, 1.25 in. Diameter Cable

FIGURE &

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

8- 66D1751 TAPE CONNECTOR ASSEMBLY 1 1/4" diameter cable . . .

(See Figure 2 through 6 for NHA)

REF

1 66B1746 . PIN

2 66-D-1751-9 . SCREW, Set 5/16 x 18 UNC-2A 3/4 LNG 3 66B1747 . NUT, Lock 4 66C1748 . TOP, Clamp

5 66C1749 . CLAMP

6 MS24667-67 . SCREW, Flathead 7 52-W-2081-3 . CAPSCREW Soc. hd

8 66F1752-1 . BODY

Change 9 2-15/(2-16 blank)

Figure 9. Anchor Assembly

FIGURE &

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

9- No Number ANCHOR ASSY (See Figure 1, Figure 2 for NHA) . . . . . . . Ref A,B,K,L

1 52-C-895-1 . TURNBUCKLE ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 K

52-C-895-4 . TURNBUCKLE ASSY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 L

2 52-C-895-2 . . TURNBUCKLE, 1-1/2 x 18 take up (JAW & JAW type)

1 K

52-C-895-5 . . TURNBUCKLE, 1-1/4 x 12 take up (JAW & JAW type)

1 L

3 52-C-895-3 . . GRAB LINK & SPRING PIN, 1/2 chain no XD-359 (mfd. by 72671)

3A MS16997-109 . . CAP SCREW, Socket head (use with Part No. 52-C-895-3)

4 152-A-1396-1 . CHAIN ASSY Anchor

5 152-A-1396-2 . . CHAIN, 1/2 x 15 ft. Ig. (mfd. by 72671)

6 152-A-1396-3 . . LINK, Dbl. clevis, no. S-247 (mfd. by 75535) 7 152-A-1396-4 . . EYEBOLT & NUT, Hex., no. G-277 (mfd by 75535)

8 152-A-1396-5 . . WASHER, Lock, 7/8 heavy 9 152-A-1394-1 . SUPPORT, Earth anchor

10 MIL-S-1222 . BOLT, Machine (1.375 X 5.32)

11 NI-12 . NUT, Plain, Hexagon (1.375 X 6NC)

Change 1 2-16.1/(2-16.2 blank)

FIGURE & UNITS USABLE

INDEX/ PART DESCRIPTION PER ON SMR

SHEET NO. NUMBER CAGE 1 2 3 4 5 6 7 ASSY CODE CODE

10- 52-W-1832-1 SHEAVE ASS’Y (See Figure 1, Figure 4, Fig-ure 6, Figure 11 For NHA)

Ref A,D,F,R,S

1 52-W-1832-2 . BEARING, no. MFC-36 Seal Master (Mfd. by 02695)

2 52-B-1143-1 . BEARING (Mfd. by 02695) 3 MS90725-113 . . SCREW, Hex hd. cap (AP) 4 MS90725-116 . . SCREW, Hex hd. cap (AP) 5 MS35338-48 . . WASHER, Lock (AP) 6 52-W-1832-3 . . PIN, Taper (AP) ASA no. 4, 3/4 in. lg

7 52-W-1833-1 . SHEAVE

8 52-B-1142-1 . TAPE GUIDE

9 52-W-1835-1 . SUPPORT

Figure 10. Sheave Assembly

2-17

Figure 11. Fairlead Unit Assembly

2-18

SHEET NO. NUMBER CAGE 1 2 3 4 5 6 7 ASSY CODE CODE

11- 52-W-1937-1 FAIRLEAD UNIT ASS’ Y (See Figure 1, Figure 2, Figure 4, Figure 6 for NHA

Ref A,B,D,F,K

52-W-2295-1 FAIRLEAD UNIT ASS’Y (See Figure 1, Figure 2, Figure 4, Figure 6 for NHA)

Ref A,B,D,F,L

52-W-2295-201 FAIRLEAD UNIT ASS’Y (See Figure 4, Figure 6 for NHA)

Ref D,F

52-W-2295-301 FAIRLEAD UNIT ASS’Y (See Figure 1, Figure 2 for NHA)

Ref A,B

1 52-D-109-1 TAPE BRUSH ASS’Y (See Figure 12) 2 52-W-1937-5 . BOLT, Hex. hd. (AP) 1/2-13 UNC-2A x 1 in lg 4 K

52-W-2295-5 . . BOLT, Hex. hd. (AP) 1/2-13 UNC-2A x 1 in lg

4 L,R,S

3 52-B-1422-1 . . PIN, Alignment

4 152-A-1267-1 . END PLATE

5 MS90728-113 . SCREW, Hex. hd., cap (AP) 6 52-C-905-7 . . WASHER, Lock (AP) 1/2 med 7 52-W-1937-3 . . SCREW, Hex hd, cap (AP) 3/8-16 UNC 2A x 1-1/2 in. lg 6 K

52-W-2295-3 . . SCREW, Hex hd, cap (AP) 3/8-16 UNC 2A x 1-1/2 in. lg

6 L,R,S

8 52-W-1937-9 . . WASHER, Lock (AP) 3/8 dia . . . . . . . . . . . . . . . 6 K 52-W-2295-9 . . WASHER, Lock (AP) 3/8 dia . . . . . . . . . . . . . . . 6 L,R,S

9 52-W-1944-1 . . RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 K 52-W-2296-1 . . RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 L

10 52-B-1368-1 . . SPACER

11 52-W-1937-7 . SCREW, Hex hd, cap (AP) 3/4-10 UNC-2A x

2 in. lg. w/nylok 4 K

52-W-2295-7 . . SCREW, Hex hd, cap (AP) 3/4-10 UNC-2A x 2 in. lg. w/nylok

4 L,R,S

12 52-W-1937-6 . . BOLT, Shoulder (AP) 3/4 dia x 5/8-11 UNC-24 x 1-1/2 in lg

8 K

MS51975-53 . . BOLT, Shoulder (AP) 3/4 dia x 5/8-11 UNC-24 x 1-1/2 in lg

8 L,R,S

13 52-C-905-1 . . SHEAVE ASS’Y (See Figure 13) 14 152-A-1696-1 . TAPE GUIDE, Outer 15 52-B-1367-1 . TAPE GUIDE, Center-bottom 16 52-B-1367-2 . TAPE GUIDE, Center-top 17 52-B-982-1 . TAPE GUIDE, Inner-top & bot 18 52-W-1937 -4 . SCREW, Button hd., soc. (AP) 3/8-16

UNC-2A x 1 in. lg.

22 K

52-W-2295-4 . . SCREW, Button hd., soc. (AP) 3/8-16 UNC-2A x 1 in. lg.

22 L,R,S

19 152-A-1172-1 . . ADAPTER, Earth anchor rod . . . . . . . . . . . . . . . 2 K 52-W-2295-11 . SLING LINK, Weldless, 1-3/8 dia. stock #G-

341 (mfd. by 75535) 2 L,R,S

20 52-D-108-1 . PIN, Earth anchor adapter . . . . . . . . . . . . . . . . . . 2 K 52-C-1377-1 . PIN, Earth anchor adapter . . . . . . . . . . . . . . . . . . 2 L,R,S

21 152-A-1250-I . PIN (AP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 K 22 AN32O-20 . . NUT, Hex. (AP) . . . . . . . . . . . . . . . . . . . . . . . . . 2 K 23 AN381-4-36 . . PIN, Cotter (AP) . . . . . . . . . . . . . . . . . . . . . . . . 2 K 24 52-B-1422-2 . . PIN, Alignment 25 52-B-1066-1 . COVER, Inspection . . . . . . . . . . . . . . . . . . . . . . . 2 K 26 52-B-1066-1Rev2 . COVER, Inspection . . . . . . . . . . . . . . . . . . . . . . . 2 L,R,S 27 52-W-1937-10 . BOLT, Hex. hd. (AP) 3/8-16 UNC-2A x 1-1/2

in. lg 8 K,L,R,S

28 MS90725-29 . SCREW, Hex. hd. cap 3/8-16 NC x 7/8 in. lg . . . . . 4 L,R,S 29 52-W-1937-9 . . WASHER, Lock (AP) 3/8 dia. . . . . . . . . . . . . . . . 8 K,L,R,S 30 MS3533846 . . WASHER, Lock (AP) med 3/8 . . . . . . . . . . . . . . 4 L,R,S 31 52-W-1937-13 . . NUT, Hex. (AP) 3/8-16 UNC-2B . . . . . . . . . . . . . 8 K,L,R,S

32 52-W-1836-14 . . NAMEPLATE

33 52-W-1937-14 . . SCREW, Drive (AP) PK Ty. U-no. 10 x 3/8

in. lg 4 K

MS21318-46 . . SCREW, Drive (AP) PK Ty. U-no. 10 x 3/8

in. lg

4 L, R, S

34 52-W-1938-1 . FAIRLEAD BEAM . . . . . . . . . . . . . . . . . . . . . . . . 1 K

2-19

SHEET NO. NUMBER CAGE 1 2 3 4 5 6 7 ASSY CODE CODE

52-W-2294-1 . FAIRLEAD BEAM . . . . . . . . . . . . . . . . . . . . . . . . 1 L

52-D-6907-1 . FAIRLEAD BEAM . . . . . . . . . . . . . . . . . . . . . . . . 1 RS

35 52-C-7025-1 . TAPE GUIDE CENTER BOTTOM . . . . . . . . . . . . . 1 RS

36 52-C-7025-2 . TAPE GUIDE CENTER TOP . . . . . . . . . . . . . . . . 1 RS

37 52-C-7026-1 . TAPE GUIDE OUTER . . . . . . . . . . . . . . . . . . . . . 2 RS

38 52-D-6908-1 . RETAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 RS

-39 52-W-1832-1 . SHEAVE ASS’Y Not Shown See Figure 10 . . . . . . 1 RS -40 MS-90725-191 . . SCREW, Hex. hd., cap (AP) 3/4 -10 UNC

2A x 3

4 RS

-41 MS-35338-51 . . WASHER, Lock (AP) 3/4 . . . . . . . . . . . . . . . . . . 4 RS -42 MS-51967-23 . . NUT, Hex (AP) 3/4 - 10 UNC . . . . . . . . . . . . . . . 4 RS

2-20

SHEET NO. NUMBER CAGE 1 2 3 4 5 6 7 ASSY CODE CODE

12- 52-D-109-1 TAPE BRUSH ASSY (See Figure 11, Figure 44 for NHA)

REF

1 52-B-873-1 . RETAINER, Brush

2 MS20074-04-03 . BOLT (AP)

3 52-B-872-1 . BRUSH, 1-5/16 by 2-7/8 by 12 in. lg. Blk

Polyethylene Bristle, 2 in. trim (Mfd. by 85362)

4 52-D-110-1 . BRACKET, Tape brush

Figure 12. Tape Brush Assembly

2-21

Figure 13. Sheave Assembly-Tape

FIGURE &

INDEX/

SHEET NO.

PART

NUMBER CAGE

DESCRIPTION

1 2 3 4 5 6 7

UNITS

PER

ASSY

USABLE

CODE

SMR

CODE

13- MS171644 SHEAVE ASSY-TAPE (See Figure 11, Figure 14, Figure 47 for NHA)

REF

1 52-C-905-5 . PIN, Spring, 1/4 dia. x 3/8 in. lg

2 52B-878-1 . SLEEVE

3 21086-2315 73680 . SEAL (NSN 5330-01-484-9825 no substitute

NSN permitted)

4 ML5214 . BEARING, (52-C-905-2)

5 152-A-1709-1 . SHEAVE

6 52-D-128-1 . SHAFT

7 1627 . FITTING, (52-C-905-4)

2-22 Change 2

Figure 14. Arresting Engine Assembly (Sheet 1 of 2)

2-23

Figure 14. Arresting Engine Assembly (Sheet 2)

2-24

SHEET NO. NUMBER CAGE 1 2 3 4 5 6 7 ASSY CODE CODE

14- 52-W-1765-1 ARRESTING ENGINE ASS’Y (See Figure 1 thru Figure 6 for NHA

Ref H

52-W-2220-1 ARRESTING ENGINE ASS’Y (See Figure 1 thru Figure 6 for NHA)

Ref I

52-W-2291-1 ARRESTING ENGINE ASS’Y (See Figure 1 thru Figure 6 for NHA)

Ref J

52-W-2291-2 ARRESTING ENGINE ASS’Y (See Figure 1 thru Figure 6 for NHA)

Ref M

52-W-2291-801 ARRESTING ENGINE ASS’Y (See Figure 1 thru Figure 6 for NHA)

Ref Q

1 52-W-1767-1 . GUARD Chain, hydraulic system . . . . . . . . . . . . . 1 H, I, J 52-W-223-1 . GUARD, Chain, hydraulic system . . . . . . . . . . . . . 1 M, Q

2 MS90725-107 . SCREW, Cap, hex. hd. (AP) 3 MS35338-29 . WASHER, Lock, split hel., (AP) 4 MS81967-8 . NUT, Hex. (AP) . . . . . . . . . . . . . . . . . . . . . . . . . . 1 H, I, J 5 MS35338-27 . WASHER, Lock, split hel., (AP) 6 AN960-616 . WASHER, Flat . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Q 7 MS90725-60 . SCREW, Cap, hex hd., (AP) . . . . . . . . . . . . . . . . . 2 Q 8 MS35690-602 . NUT, Hex. (AP) . . . . . . . . . . . . . . . . . . . . . . . . . . 2 H, I, J 9 MS35338-27 . WASHER, Lock, split hel., (AP) . . . . . . . . . . . . . . 2 H, I, J

10 MS90725-61 . SCREW, Cap, hex. hd., (AP) . . . . . . . . . . . . . . . . 2 H, I, J 11 MS90725-60 . SCREW, Cap (AP) . . . . . . . . . . . . . . . . . . . . . . . 1 J, M, Q 12 MS35338-27 . WASHER, Lock (AP) . . . . . . . . . . . . . . . . . . . . . . 1 J, M, Q 13 52-W-1765-15 . CHAIN, Roller, made from ASA35 bulk stock chain - w/str & offset conn., links 139 pitches 1 H

52-W-2220-15 . CHAIN, Roller made from ASA35 bulk stock chain - w/str & offset conn., links 139 pitches

1 I

52-W-2291-15 . CHAIN, Roller made from ASA35 bulk stock chain - w/str & offset conn., links 139 pitches

1 J

52-W-2291-51 . CHAIN, Roller made from ASA35 bulk stock chain - w/str & offset conn., links 146 pitches

1 M, Q

14 35CL . LINK, Connecting (71041) 15 52-W-1765-14 . CHAIN, Roller, made from ASA40-2 bulk stock chain - w/str & offset conn. links

52-W-2220-14 . CHAIN Roller made from ASA40-2 bulk stock chain w/str & offset conn. links

52-W-2291-14 . CHAIN, Roller, made from ASA40-2 bulk stock chain w/str & offset conn. links

52-W-2291-52 . CHAIN, Roller, made from ASA40-2 bulk stock chain w/str & offset conn. links

16 52-W-1764-1 . GUARD, Chain, rewind drive . . . . . . . . . . . . . . . . 1 H, I , J 32-E-221-1 . GUARD, Chain, rewind drive . . . . . . . . . . . . . . . . 1 M, Q

17 MS51967-14 . NUT, Hex. (AP) MS35690-802 . NUT Hex. (AP) . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Q

18 MS35338-29 . WASHER, Lock, split hel., (AP) 19 MS90725-113 . SCREW, Cap, Hex. hd. (AP) 20 152-A-1440-1 . SPROCKET ASS’Y, ASA NO. 11-13T Type

“ B” (Mfd. by 27393) w/Bearing, Needle, No.

MR-16-N (Mfd. by 92563)

1 I

21 52-W-1765-15 . TENSIONER, 1 in. dia. no. 2SF (mfd. by 27393)

1 H

52-W-2220-15 . TENSIONER, 1 in. dia. no. 2SF (mfd. by 27393)

1 I

52-W-2291-15 . TENSIONER, 1 in. dia. no. 2SF (mfd. by 27393)

1 J, M, Q

22 MS35690-602 . NUT, Hex. (AP) 23 MS3S338-27 . WASHER, Lock (AP) 24 MS90727-65 . SCREW, Cap, hex. hd. (AP)

MS90725-65 . SCREW, Cap, hex. hd. (AP) . . . . . . . . . . . . . . . . . 2 Q 25 AN960-616 . WASHER, Flat (AP) 26 152-A-1497-1 . BRACKET, Chain ten 27 MS35690-602 . NUT, Hex. (AP) 28 MS35338-27 . WASHER, Lock (AP) 29 MS90725-63 . SCREW Cap hex. hd. (AP) . . . . . . . . . . . . . . . . . 4 H, I, J

MS90725-68 . SCREW, Cap hex. hd. (AP) . . . . . . . . . . . . . . . . . 4 M, Q 30 AN960-616 . WASHER, Flat (AP)

2-25

SHEET NO. NUMBER CAGE 1 2 3 4 5 6 7 ASSY CODE CODE

31 52-W-1765-32 . CHAIN, Roller, ASA, no. 100-W. Str. & offset comm. links-102 pitches

1 H

52-W-2220-32 . CHAIN, Roller, ASA, no. 100-W. Str. & offset comm. links-102 pitches

1 I

52-W-2291-32 . CHAIN, Roller, ASA, no. 100-W. Str. & offset comm. links-102 pitches

52-W-2291-53 . CHAIN, Roller, ASA, no. 100-W. Str. & offset comm. links-102 pitches

1 M, Q

32 52-W-1765-4 . V-BELT, Matched set of 4 B-90 (mfd. by 71956)

4 H

33 52-W-1737-1 . INSTALLATION-BRAKE WATER COOLING

& REWIND CLUTCH CONTROL (See Figure 19 & Figure 25)

1 H

52-W-2221-1 . INSTALLATION-BRAKE WATER COOLING

& REWIND CLUTCH CONTROL (See Figure 20 & Figure 25)

1…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.